How To Replace The Entire Door Latch Assembly On A 2000-2006 Chevy Silverado.
HTML-код
- Опубликовано: 20 июн 2021
- Fix the problem of the RADIO NOT TURNING OFF when the door is opened on a Silverado.This video will show you how to replace the entire driver's door latch assembly on a 2006 Chevy Silverado. The door latch has a switch in it that tells the computer system when the door is open. When that switch becomes defective the radio won't go off. This same latch assembly is also used in other models of Silverados ranging from 2000 to 2007.
Хобби
One of the best, most straightforward DIY videos I’ve seen on RUclips in a long time. Well done!!!
Thank you!
Robert, that, by FAR, is one of the best done video "How To"s" I have ever seen! Thank you for it.
Thank you!
Could not agree more!
You sir are the Mr. Rogers of "how to" repairs. Outstanding video! Other channels could learn alot about how to do this type of video correctly. Well done.
Thank you Nick, I appreciate that!
@@Thebobfactor You're welcome! I've got an 05 chevy that I have to replace the door latch and power window assemblies on. Watched a few videos on the latch assembly replacement and yours was the best by far. Thank you for taking the time to make such a detailed video. Much appreciated.
Very well done & explained very well. Better than the professionals.
I just finished this job. Thanks to your tutorial it was an easy job. You did a fantastic job of explaining every step. I had trouble with the inside door lock rod. I ended up unsnapping it from the 3 door connections and took the latch out with the rod attached. Then I could press the rod out of the latch. I could get good pressure on it when it was in the door but it wouldn't budge. Thanks a million for this video.
One of the best how to video's I've ever seen!
Thank you!
Wow what a well done video on the door lock actuator. Thoroughly detailed at a good, even pace. Thanks Robert. kudos!
Thanks Eddie.
Had the identical issue with my 2007 2500HD Classic. This video showed me every step I needed to replace the latch assembly. Had the laptop sitting on the front seat while I performed each step, and Mr. Hosea nailed it! Thanks Robert!
You're welcome Craig. I'm glad the video helped you out.
You did a great job explaining the removal process.
This is an extremely well done tutorial ! No extra dialogue or distraction, straight forward and precise. Thank you!
Thank you!
Excellent tutorial with a thorough explanation of each step. No one could ask for more.
Great video! Great explanation and just awesome narration! You could do that for a living! Thanks so much.
Thank you.
Great video. Your attention to detail on the plastic connectors is awesome and much appreciated The plastic connectors are the one thing about this job that is not straightforward.
Thank you!
I watched several videos on this procedure. This is by far the best one.
Thanks Ken.
Great explanation, looking forward to the follow up video you mentioned on cleaning the contact.
Awesome video! My power lock wasn't working so I needed to replace latch. I truly could not have done without this video!! Everything works great now. Thank you!
Best instructional video I have ever seen!! Thank you!
Exactly what I was looking for got stuck on the rods gonna finish up tomorrow
This was SOOOOO helpful. I fixed mine today with your help. Thank you so much.
That's great. I'm glad the video helped out!
Just like every other comment, best tutorial on You Tube. Thanks for taking the time to do such a detailed video. I'm ready to tackle mine. Subbed and liked.
My door latch on my 2000 Suburban broke today and the door wouldn’t shut. I had to look up how to get the door panel off and how to replace the latch. This was the best video I found on how to do that. Thank you. Maybe I can get it replaced as soon as I can find a new latch.
This is such a great how to video. Very detailed! Thank you
Thank you for a great how-to video!!! Detailed video!! Thank you for not mentioning irrelevant things such as in other peoples’ videos. Well done!
Thank you! I'm glad you like the video and I hope it helped you out.
Great video. EXACTLY what I was looking for!! Thanks.
Ty for the easy step by step. Just done same thing in about 30 mins thanks to you and this video
One of the best done tutorials I’ve ever seen! Great job and thank you!
Thank you!
Thanks! Did the operation today and it was easy while watching your excellent guide.
That's great Stefan. I'm glad the operation was a success and that the video helped out.
Best explanatory video I have seen!! Great job.
Awesome video! I’d add 2 things. 1 window up to stay clear of connections and mechanism and 2 turn off the interior lights as the small door panel light can get quite hot!
Both great points Mark. Thank you!
Great video Sir. Helped me out a lot. Thank you 👍👍
Nice and clear narration, great camera work! Excellent job!
Thank you.
Hey man, really nice video! Just as clear as it could be and really helped me out! Thanks for taking the time!
Thank you! I'm glad it helped you out.
Real nice video. Well done and exactly what we need. Good work Robert!
Thank you Greg!
You are awesome! I was having this exact same problem! Thanks so much!
Great tutorial... I'm getting ready to tackle the latch on my '04 Silverado and this will be a big help. Thank you for posting without all the background wind noise, obnoxious music etc.
Edit: I finally got around to installing the new latch assy today some 120 days after my initial comments. Process was as described with slight variance in door panel removal/reinstall (2004 Z71 Silverado w/Bose Sound) procedure but otherwise video is spot on with instructions and commentary. Again, thanks for taking time and producing such an outstanding tutorial. mardyn
Very detailed video….thank you!
Excellent video for replacing the door latch assembly. THX. In this case, the top electrical connector pins had corroded to the point on intermittent contact, usually on a bump that resulted in the door locks going on off on off on off. In addition, the dome lights would not go off upon door closure, and the dash warning was "driver door not closed". Thx for the video>
Excellent video!! Very informative, great lighting & videoing skills. Top it off with good audio and editing!!
Very helpful video thank you
Great made video
Thank you worked perfect 👍
Very professional video thank you excellent 👍
That was an excellent made how to video!
Thank you! Wonderful video!
Thanks Bryan!
Thank you for this. I bought a 2003 with this problem
Great instructions. Thank you
Great video. Thank you!
Great job on the video, but to add a problem with the replacement, the clip for the threaded rod, the new clip didn’t fit so I used the old one. But thanks for the help!
Thanks for the information about that clip Ted. That's good to know.
Great video !!!!
The Bob Ross of door lock replacement.
Thank you Jake. That's much appreciated!
Very good video!!
Wow awesome video love your pacience thumbs way up for you sr.
Thank you!
Ty 💕 saved my day
Thank you so much!
Excellent!
Thank you very much!!!
You're welcome. 🙂
great tutorial. I need to do this to both of my doors, but most importantly, the passenger side door. It does not open from the inside and if you close it a couple of times it will lock itself from the outside... its such a pain
Nice!!
Thx bud👍
Great view video! Don’t be a dummy and start with window down 😂. Also once connectors are disconnected it helps to disconnect wiring loom from door frame ( one push connector ) and get the connectors out of work space. Once again thanks!
Great video Robert! What kind of camera are you using to get those nice close-ups? Surely it's not your phone!?
Thank you! I used a Panasonic Lumix ZS20 for this video. I've also used it on quite a few other videos now, and it seems to do a pretty good job.
Robert, this was an excellent video!! I have a question for you I will try to make it short.
My 07 classic started to do this and I wasn’t sure what the issue was. It would go off eventually so I didn’t really worry about it.
But then while driving I had somthing weird happen. The truck “dinged” a few times and my radio went black. I have checked everything and can’t get my radio to come on. Sinse it had started to not shut off when the doors were open I figured I should investigate that, when I found this video sure enough my truck dose not chime when the door is open and the key is in the ignition.
My question is, could this be the reason my stereo is NOT turning on? I have traced everything and checked every fuse. Please let me know if this issue could cause the radio to go off and not come on, could it be tricking the radio even thoe the truck is on and doors are shut? Thanks
Hi David. It sounds to me like you have something else going on with your radio, because even if the switch in the door was stuck open or stuck closed, the radio should still come on once you turn the key on. I believe the switch in the door will only effect the circuit that the radio is on when the key is turned off. It might be that there is a problem with the ignition (key) switch itself, or with the wiring harness. I'll do some checking. If I come up with anything I will sure let you know.
Very well done video & quite easy to do after watching. I have a question, did your door seem a little tiny bit rougher to close after swapping the actuator out? I bought the same one as you did. I’m assuming cause it’s a new piece it’s going to take a little open close use of the door to “wear” down enough.
Ps this is a good time to clean the old grease off of window tracks/door lock rods & re-grease. Super lube works perfect for this.
No, I didn't notice any difference on how it opened or closed. It seems fine. Do you notice any sag at all in the door when it's opened that might be caused from worn door pins? I had changed out the door pins on mine a few months before I replaced the door latch assembly. Maybe the old door latch assembly has also worn a bit if the the pins are letting the door sag, and now the new latch assembly is having to lift the door when it's closed, as the door latch post that's on the door frame is going inside the new latch. That's a guess though.
No i haven’t noticed any door sag. The factory pinstripes still line up I’m going to unscrew the actuator & retighten it. Thanks👍🏽
Hi Robert, have you by chance made the video about cleaning the contacts?
Hi Mark. No, I'm sorry I haven't done that one yet. And I still have the old one sitting on my bench so that I could use it in a video. I'll hopefully get to it in the near future, but that doesn't help you out at all right now. Sorry Mark.
No worries I know how things can go lol Great video, very well detailed and articulated. Keep up the great work.
Mark
You saved my bacon. Hoorah
Great video. One question is it the same part if it on the passenger door?
No, it's a different part number. The passenger doors don't have a key lock like the driver's side does. Here's a link to one on Amazon that says it fits the passenger door on my 2006 Silverado: www.amazon.com/OTUAYAUTO-Actuator-Front-Right-Passenger/dp/B088NW1BPB/ref=sr_1_3?crid=V3R1HES38SBS&keywords=2006+chevy+silverado+door+latch+passenger&qid=1706140811&replacementKeywords=door+latch+passenger&sprefix=2006+chevy+silverado+door+latch+passenger%2Caps%2C178&sr=8-3&vehicle=2006-47-491------------&vehicleName=2006+Chevrolet+Silverado+1500
Good video but my problem is my driver door is stuck close it won’t open and I was having problems with the door latch not closing the door and I clicked the locks and moved door handle and it closed and after that it won’t open does anybody know how I could open it thanks in advance
Great video, you would not know the part number on that piece would you? Thanks
Hi Edward. The GMC OEM part number is "15110643", and I purchased it on eBay.
Great video.
My problem is the reverse of yours.
Dome lights won’t come on when opening passenger door.
I can’t seem to find your contact cleaning video. 🤷🏻♂️
Sorry John, I never did get a chance to make that other video about cleaning the contacts. As far as your passenger door not turning on the dome light, if it also doesn't turn off the radio when the passenger door is opened, then it's the exact same problem with a defective switch in the door latch assembly.
@@Thebobfactor just finished fixing my truck.
In my case when I replaced the latch assembly a while back, I didn’t have the switch gear clocked correctly.
Removed the switch from the latch assembly, clocked it correctly an then reassembled & installed it.
Dome lights work as they should 👍🏼
Coincidentally, window regulator decided to let go while I still had the door panel off. 😳
Quick trip to the auto parts store and a new regulator was also installed.
All good now!
@@johnpadovan6430 Great job! That's how you do it. And I'm glad you were able to figure out the problem with the latch assembly. That's good info for the rest of us.
Did you cut holes in the door metal or are they factory?
Hi Ron. No, I didn't cut any holes. Everything is factory on that.
Merci bcq j’ai réussi ma porte
Excellent Jonathan. I'm glad the video helped you out.
Dumb Question does it hurt to not replace it and just turn radio off before getting thanks for the help.
No, I don't think it would be a problem if you didn't. My biggest worry was having the battery run down if I did forget to turn the radio off.
Thank you i just bought the truck and it only turns off from drivers back door other 3 doors dont turn it off.
@@CharlesHall-ui3cb The right-rear door on my 2006 is acting up now too, so I will need to change it out soon. And if you do forget to turn the radio off, it will shut off automatically anyway after about fifteen minutes or so.
While waiting for my replacement, I went to the settings and turned off the alarm to avoid the 2:30 AM alarms.
Tried this and now my entre door won't work
If my cluster is on all time, it’s cause of this huh?
If the radio is also on when the cluster lights are on, then I'd say yes. However, if it's only the cluster lights that are staying on, then it's probably something else causing them to stay on.
@@Thebobfactor but I have to open my passenger side door to turn off my cluster
It sounds like the same problem. But just to be sure, did you try moving the driver's side door's latch to see if the cluster lights (and/or radio) will go off? I show doing that in the video.
@@Thebobfactor is the base model the same one ?
@@chriscamacho718 base model??