How To Install A Shower Grab Bar - Ace Hardware
HTML-код
- Опубликовано: 3 авг 2024
- Bathroom safety is easy to complete! Watch as Ace's Home Expert, Lou Manfredini, shows you how to install a metal grab bar in your shower or tub surround.
Products Featured:
Grab Bar
bit.ly/3TfYklW
Stud Finder
bit.ly/3wqB62s
Measuring Tape
bit.ly/3y1FEMS
Power Drill
bit.ly/3Cqhq2z - Хобби
Very nice but if that were me I would have add some silicone into each screw hole and on the screws them selfs to keep the water proofing in tact . At my age I’ll be needing those safety bars soon
Thank you
You really should seal the holes with some silicon calk.
Very fortuitous that you were able to hit two studs. It would have been nice to see how you would have done it had you not been able to sink the screw into that second stud. What fastener would work best?
Hi Joel,
A butterfly fastener and 1/4 x #20 stainless screw is best. Hope this helps!
My wife wanted a grab bar in a certain place. No studs. I used anchors with a 5/16 bit. Pretty easy.
What if the studs are not where the rail goes?
Without seeing the bathroom, it may be worth buying a handrail that is 16” long and if the framing was done right you should hit them. Or at least one and for the other side use butterfly hardware to push through and the expand behind the wallboard for a strong hold.