Fass do a system for big rigs that do excellent filtration and clear out all the air bubbles, also I usually prime the fuel filters with diesel injector cleaner
If you still have fuel priming issues, look at the fuel supply lines to the “new” fuel filter base. In the last semi video, you could clearly see air bubbling out of the fitting in the old filter, causing leak-back and loss of fuel prime.
On the fuel filter base on the engine there is 2 check valves in it, one on the bottom on the right and one on the front left, pull them out there might be junk in them, if you can blow threw them change them, I’ve changed a ton of them!!
And it don't matter how many times you drive it you can't just delete it and all the problem will get better make the problem a lot worse it will make it worse you are not doing something right if it's not getting enough fuel pressure
I worked for a trucking company and he had the davco fuel filter set up on a Cummins isx that made us crazy with hard Starts and stalling . We ditched the davco for a spin on style base . Problem solved
Greg do yourself a favor and spend the money to buy paint matched full tire fenders for the pete PLEASE. I sorry but the chrome fenders with the chrome brackets just doesn't look right on your truck. You need the chrome brackets with the black paint matched fenders.
Did u put the drive line back in time didn’t look like it
For cb radio Stryker 655 is good radio one of best led display can change any color u want
Skittle Mike!
The rubber blocks the hood sets on you have to put a little grease on them and the hood will not stick and open easier
You should powder coat the intercooler piping to match the black on the truck
The second gen looks so damn good on those stock black wheels.
Forget all the filter and primer nonsense and install an Airdog. 3406e and C15 respond very well to them.
Saint Mike. For putting up with all of Greg’s shenanigans.
Mike honcho no question
+1 for Magic Mike
Fass do a system for big rigs that do excellent filtration and clear out all the air bubbles, also I usually prime the fuel filters with diesel injector cleaner
Have to get some tappers for the stacks
It's Silent Mike...no doubt.
You handled mikes wood quite nicely...remember what happens in the garage stays in the garage...lol
He is all the mikes
I like " Silent Mike". The old saying is " Silence is Golden " & Mike is golden. Also, we call a sledge hammer a " persuader".
Fab it mike
This video was hilarious. Keep it up boys
Magic Mike because he works Magic with his mechanic skills !
Now that I know the back story I vote Mexico Mike... I thoroughly want to encourage more trips to mexico
you can use trans fluid to fill up your fuel filters...just a little knowledge for the next time.
Judging by his FL driving it's now Muppet Mike😜😜👍
Dirty mike for the win
I do recommend putting a light layer of grease on the hood supports so they don’t squeak going down the road
Silent Mike 👌
Silent mike and easy with that lumber it’s gonna be worth it’s weight in gold one day!
You need to get a goldenrod tire tool so you can take the tire off the rim easier
Silent dirty magic mike
Only thing you need is a nice big mahogany steering wheel.
dirty mike and the boys
Mexico Mike
Money Mike!
Nope.... pause... it's Cadillac Mike now... 🤘
Greg and Silent Mike got Kevin Smith shakin in his boots
Silent Mike only way I know him
No Greg don't change rims on peterbilt they look freaking cool but i agree on polish part
Mexico mike
Hope your drive line is in phase! love the pete vids
Dirty Mike and he needs a red prius with some silver doors....also I got the Mexico Mike thing right away
I think mullet mike is in the works...
Truck would look nice with a matching steering wheel.
If you let it go new cylinder head valve bender
I prefer ‘Jimmy’. Thanks.
Give her the wood Greg 😂👍
There's no question, he is Silent Mike.
Silent Mike for sure
I want that truck
Call him” Edison” cause he is keeping the lights on!
Did you install the driveshaft in phase? If not you’ll end up with a vibration down the rd.
Silent mike all day
c'est MIKE qui fait tout le job !!!
2nd gen looks good on those black stockers. 👌
So did you put o ring wrong? On fuel filter?
You better check the t/belt on frank ten years 100k eclipse / mirage mitsu motor
Greg, no Milwaukee grease gun??
Magic Mike
Silent Mike. Mexico Mike when sketchy stuff..
Lol. Take it from me, "Mike"...
Fass makes a fuel system for the cat motor
just waiting on the ole pette to get an airdog
Silent Mike for sure.
Silent Mike with the occasional Jimmy
Its best to block the center hole of the fuel filter and fill it from the outer small holes so the fuel is actually filtered.
Froggy fresh mike hahaha
Tito greg $ magic mike gettin R done ✅
Do you tow the race trailer anywhere or much anymore lately
No doubt its Silent Mike🤙🏽
The Pete needs the grill polished up
Should be greasing those u-joints until grease comes out of each cap.
What!!! Machells driving a rattlelack dude rattlelack mike
😎👍
U had a good filter
I like “Can Do Mike”
Why u taking off the 24’s? They look way better then 22’s IMO
dirty mike!
Mexico Michelle
“Mike Hawk” is the only right answer
For the love of god will you please buy a king pin to gooseneck ball adaptor and hook the peterbilt up to the race trailer.
For a cummins guy. He definitely made a big jump to CAT. 🥴🥴
That truck not have a power divider?
Next thing you know he's gonna throw an air dog on it. Which I would definitely recommend
With the price of lumber these days I’m sure you could find it on a snap on truck.
If you still have fuel priming issues, look at the fuel supply lines to the “new” fuel filter base. In the last semi video, you could clearly see air bubbling out of the fitting in the old filter, causing leak-back and loss of fuel prime.
On the fuel filter base on the engine there is 2 check valves in it, one on the bottom on the right and one on the front left, pull them out there might be junk in them, if you can blow threw them change them, I’ve changed a ton of them!!
Nice!!
Silent Mike 100%
👍🏽
And it don't matter how many times you drive it you can't just delete it and all the problem will get better make the problem a lot worse it will make it worse you are not doing something right if it's not getting enough fuel pressure
Dirty mike for me
Hey Greg there is a check valve for the fuel on the other filter screws from the baton up next to the filter. 👍
what about lollipop mike!?🤔
It would be weird if he was anything but silent mike
Mike n Ike’s 🤪🤪🤪
Greg hurry up and hook the Pete up to that big beautiful unit of a trailer and pull it around already!
I remember Greg when he was skinny and in shape LOL
can we pull that cat now and build a 2000hp beast??
I worked for a trucking company and he had the davco fuel filter set up on a Cummins isx that made us crazy with hard Starts and stalling . We ditched the davco for a spin on style base . Problem solved
Silent mike
A let me get that big filter you took off
No air dog? You feeling ok Greg?
Greg do yourself a favor and spend the money to buy paint matched full tire fenders for the pete PLEASE. I sorry but the chrome fenders with the chrome brackets just doesn't look right on your truck. You need the chrome brackets with the black paint matched fenders.