Sir please include mosfet, capacitor, resistor, coil, in this power sequence and how to check if faulty using multimeter. Very imformative channel. Thank you
Hello! Excellent works with the curcuit diagram. I have a problem with shuttle motherboard. It seems from pci diagnostic card that reset light stays always on. I check reset and there no voltage at all (i don t have switch). Where should i check for possible shorted curcuit? And I/O or Southbridge is responsible for reset operation??
Hi thanks for this important and informative video. If the motherboard comes and stays on with no post which components do I test? And how do I test the SIO chip to check if it's faulty or not?
hi, im andi from indonesia,, im interested in learning your tutorial.. can i ask for power sequence for repairing pc motherboard like asrock, gygabite, asus and etc ?
please man i need help,when i plug the power to the psu it boots without pushing the power button of my pc,so what is the cause maybe it is a short in the power circuit or what
p.s:the pc does not boot else if i push the power button,just before pushing the power button the psu is on with all the fans but without start up of pc
@@dhakalabandinstitute6964 yes i have some experience,and the power button cable is not the problem because i remove it and the problem stays,i am thinking about the power on wire in the board maybe it has short somehow,so how to be sure if it is short??
Hello, this morning impossible to start my motherboard H77, I tested everything, everything seemed normal. Just one thing, the battery was dead, which made me think maybe a short circuit in the southbridge. After testing it wasn't shorted, so in the end it was the stupidest thing in the world, the battery was dead, and the motherboard won't boot if the battery doesn't have a minimum voltage.... Honestly, I've never seen a PC motherboard not start because the battery is empty/missing...
@@dhakalabandinstitute6964 It's not a laptop it's a desktop computer, and I've checked I don't have a short in the memory battery and if there's no battery it won't start. It works with new battery cr2032 that's the most important thing, but it's a strange design...
Sir my pc wont post unless i heated the motherboard with hair dryer for a while and then my pc turn on and work normally, i try to find solution but dont find very specific solution, maybe u have any solution
Excelente video, muchas gracias ingeniero, saludos desde PERÚ 🇵🇪 👍 ojalá que sus videos siempre estén en inglés.
Thank you so much for the lecture Sir, with deep learning abt this POS of desktop its much easier to to track and trobleshoot pc on the field.
Te agradezco de todo corazón por activar los subtítulos del video
Hindi me bhut hi achhi trh smj ayega bhai
Muchas gracias por tan magnífica explicación, orientación y conocimiento, muchas gracias.
Donde puedo comprar su curso.
thank you from Indonesia country
Excellent sir!!!!!!
Hi, Great video, so much details. When i switch on PSU, motherboard LEDs lights up, but does not post or switch on. where should i start faultfinding?
Sir please include mosfet, capacitor, resistor, coil, in this power sequence and how to check if faulty using multimeter. Very imformative channel. Thank you
we will make these soon
Awesome Work Fahim
thank you
Hello! Excellent works with the curcuit diagram. I have a problem with shuttle motherboard. It seems from pci diagnostic card that reset light stays always on. I check reset and there no voltage at all (i don t have switch). Where should i check for possible shorted curcuit? And I/O or Southbridge is responsible for reset operation??
Alhamdulillah awesome
Hi thanks for this important and informative video. If the motherboard comes and stays on with no post which components do I test? And how do I test the SIO chip to check if it's faulty or not?
we have another video naming " requirements of SIO. watch it and check all voltages and signals of your IO
@@dhakalabandinstitute6964 thanks will do that:)
Thank you Sir
hi, im andi from indonesia,, im interested in learning your tutorial.. can i ask for power sequence for repairing pc motherboard like asrock, gygabite, asus and etc ?
very nice
thank you very much
very effective
please man i need help,when i plug the power to the psu it boots without pushing the power button of my pc,so what is the cause maybe it is a short in the power circuit or what
p.s:the pc does not boot else if i push the power button,just before pushing the power button the psu is on with all the fans but without start up of pc
first change the power button cable. if still same, you should follow some steps. Tell me first do you have motherboard repairing experience?
@@dhakalabandinstitute6964 yes i have some experience,and the power button cable is not the problem because i remove it and the problem stays,i am thinking about the power on wire in the board maybe it has short somehow,so how to be sure if it is short??
@@rabihbitar5469 Check CMOS Clear jumper and CMOS battery. And you did not mention the motherboard model.
👍👍👍
Thanks
Sup do for laptop also
nice
Hello, this morning impossible to start my motherboard H77, I tested everything, everything seemed normal. Just one thing, the battery was dead, which made me think maybe a short circuit in the southbridge. After testing it wasn't shorted, so in the end it was the stupidest thing in the world, the battery was dead, and the motherboard won't boot if the battery doesn't have a minimum voltage.... Honestly, I've never seen a PC motherboard not start because the battery is empty/missing...
It happens sometimes. Actually your battery is shorted. Try to start your laptop without battery or buy a new battery.
@@dhakalabandinstitute6964 It's not a laptop it's a desktop computer, and I've checked I don't have a short in the memory battery and if there's no battery it won't start. It works with new battery cr2032 that's the most important thing, but it's a strange design...
my desktop turn on and its off suddenly a few seconds, what section i focus?
Sir my pc wont post unless i heated the motherboard with hair dryer for a while and then my pc turn on and work normally, i try to find solution but dont find very specific solution, maybe u have any solution
any part/IC may have loose connection. you may heat by hot gun.
একটা মাদারবোর্ড নিয়ে ভিডিও করলে বুঝতে সুবিধা হইত 👍
Like
You don't sound to sure!!!
বাংলাতে করলে সমস্যা কি। ইংরেজিতে করে কত ভিউ হলো
bangla video o ache