Sorry for the delay guys, have several videos to edit so more content coming shortly! Thank you everybody that still supports the channel you guys are awesome. 🙌 🔥
Nice job! Would it be possible to make the last part of hole locating on back seat delete easier if one bought a Watson rear seat delete kit, line it up with factory one, and mark the holes? Thanks.
Sharp car, young man. Love when people get new cars how "wonderful" everything is. I've owned a couple Porsches (911 Turbo and 911 GTS) plus two BMWs (325i an 540i Sport), in 24 years . Vastly superior interiors, and the Porsches were vastly slicker cars overall...at enormous expense ($190K and $142K, respectively). The BMWs were rolling class acts. Typical European, Mercedes< Maserati, Ferrari, and Lamborghini have that pretty well sewn up too and let's not forget Audi. However, Americans are still only one generation behind: At its price point, GT350 standards are very slick: roughly $65K anymore. So, I bought a GT350R mostly because it was more exotic and had most of what you discussed right off the showroom floor: the slightly different exhaust, interesting wheels, ability to take it to the track w/o much fuss. No back seats or other worthless weight, either, plus a few other changes Ford might or might not bother telling you about. FOR THE MONEY, nothing can touch these cars, and that's a fact, and I've enjoyed about a thousand miles on mine so far (chassis no. JR551). Mildly surprised you didn't just buy an R from the get go vs. various mods to make a Standard track worthy (roll cage not included on either standard or R, though). Always a bit surprised when you people buy 3/4 the right tool instead of the 99% ready track car right off the showroom floor, missing only the roll cage and racing harness. Good luck with that, though, and guys do need something to spend their money on.
I wanna do this bar with my v6 " poor man gt350" clone. I got the gt350, sway bars, springs, control arms, tie rods, camber arms and toe arms, did the spring conversion, even got the stupid little red push button starter and a replica shift knob. i want to do the seat delete and roll cage, then hunt for an oil cooler. basically making a lower powered clone, cause its cheap and i love the way the gt350 felt at the track but cannot afford a 40k car. ( 15 v6 was only 16k haha)
Jeff Ashton it’s all good, your tuner boxes are doing well so I’m sure it’s taking up a lot of time. Thanks for the content! You’ve made me fall in love with that lightning blue, if I get a Mustang it would definitely be in that color.
How do you only have 21k you have such good quality I’ve watched your videos since i got my own gt i did exactly what you did in this vid and I’m making 803 to the wheels ps. Not saying 21k isn’t a accomplishment bcus it is i just think you deserve more!
*update* the reason he hasn’t been uploading is because his mom passed away recently and he hasn’t really been in the right state of mind to upload, but he does upload to his Instagram still since he does own a detailing company/performance shop. Just look him up on Instagram if ya want more info. He will post just not sure when on RUclips.
Spot welds are not symmetric on most cars, try measuring off stamped holes. Cross reference by make a measurement between the holes first, with a tram gauge or a regular tape measure.
Jeff Ashton I called and was put on the waiting list as you did...I told them I would like to do the 2 day; hopefully I hear back from them and can plan it. Looks like you had a blast!
Wow! Nice job Jeff. You have a ton of patience. This would drive me nuts & id never attempt this in my 17-350. I’d be so nervous & I know I’d FK it up. Lol. Again, Great job. Thanks for sharing.
I'm really glad I broke it up over three days or I would've lost it at some point haha. I probably lifted up the car and checked the brake lines about six times to be certain I wouldn't hit them. Well worth it now that it's installed though! 😁
Nice video the red looks good. I was thinking about putting one in my super snake and I’m 6’4” and was worried about lean the seat back and it sitting comfortable for me . Can you let me know how far the seat will go back with you in it, thanks
I hope you’re all good Jeff. We know you RUclipsrs have lives and priorities beyond this but 2 months got me hoping you’re okay. Anyway miss the content and hope your in good health💪🏾
Jeff just got my new engine in it’s a MMR 2000 hp Long block 5.2L putting on a 4.5L Whipple on it got blower in Friday they sent black not polished like I ordered now they have to resend the correct one 😞 I was hoping to make it to mustang week in myrtle beach in September this is a video of engine ruclips.net/video/J2tNttMAQj0/видео.html
I completely agree, GT350R calipers are on the list! The red calipers will go perfectly IMO. I would paint them but would want to pull the calipers off anyways to do it right.
Jeff, what a great job. I have a lightning blue 2017 GT PP. I've already done 6 track days and it is great except the rear diff overheats on hot days but this is only when I really push it. A light comes on in the center dash so I just pull off and no problems. This is usually after 15 minutes of hard laps. Anyway, your car looks great. Go become a track monster! I'm blowing away very expensive cars after two full days of instruction and a few other events just driving around the track as best I could. BTW, Mustangs are not the easiest cars to get around the track. Instruction was key.
Thanks man! The performance pack is no slouch on the road course. I went to the Ford Performance Racing School and learned a ton in the two days I was there. I'll have a video out soon on it. I had the GT on day two and it was just as fun!
Sorry for the delay guys, have several videos to edit so more content coming shortly! Thank you everybody that still supports the channel you guys are awesome. 🙌 🔥
Jeff Ashton I miss you bro in your video I love it video 💯
Dominic Kirkwood gurgle gurgle
What's new BRO
U dead?
Yea you ded man?
Hope all is well
Nice job! Would it be possible to make the last part of hole locating on back seat delete easier if one bought a Watson rear seat delete kit, line it up with factory one, and mark the holes? Thanks.
Sharp car, young man. Love when people get new cars how "wonderful" everything is. I've owned a couple Porsches (911 Turbo and 911 GTS) plus two BMWs (325i an 540i Sport), in 24 years . Vastly superior interiors, and the Porsches were vastly slicker cars overall...at enormous expense ($190K and $142K, respectively). The BMWs were rolling class acts. Typical European, Mercedes< Maserati, Ferrari, and Lamborghini have that pretty well sewn up too and let's not forget Audi. However, Americans are still only one generation behind: At its price point, GT350 standards are very slick: roughly $65K anymore. So, I bought a GT350R mostly because it was more exotic and had most of what you discussed right off the showroom floor: the slightly different exhaust, interesting wheels, ability to take it to the track w/o much fuss. No back seats or other worthless weight, either, plus a few other changes Ford might or might not bother telling you about. FOR THE MONEY, nothing can touch these cars, and that's a fact, and I've enjoyed about a thousand miles on mine so far (chassis no. JR551). Mildly surprised you didn't just buy an R from the get go vs. various mods to make a Standard track worthy (roll cage not included on either standard or R, though). Always a bit surprised when you people buy 3/4 the right tool instead of the 99% ready track car right off the showroom floor, missing only the roll cage and racing harness. Good luck with that, though, and guys do need something to spend their money on.
I wanna do this bar with my v6 " poor man gt350" clone. I got the gt350, sway bars, springs, control arms, tie rods, camber arms and toe arms, did the spring conversion, even got the stupid little red push button starter and a replica shift knob. i want to do the seat delete and roll cage, then hunt for an oil cooler. basically making a lower powered clone, cause its cheap and i love the way the gt350 felt at the track but cannot afford a 40k car. ( 15 v6 was only 16k haha)
Fuck where’s Waldo! Where’s Jeff?!?!?
Jeff Ashton
WHERE THE FUCK YOU BEEN 🗣🗣🗣
Been missing your videos! This was an awesome install! Keep up the great work!
Silva Motorsports thanks man, appreciate the support. Sorry for the lack of vids recently!
Jeff Ashton it’s all good, your tuner boxes are doing well so I’m sure it’s taking up a lot of time. Thanks for the content! You’ve made me fall in love with that lightning blue, if I get a Mustang it would definitely be in that color.
Ready for turbos? ;)
How easy was it to bend the line? Also did the kit come with those brackets for under the car?
Talk about a cliffhanger
wow jeff looks awesome!! I bet you are going to be able feel the difference right away!!
GRABBER BLUEEEEEEE
How do you only have 21k you have such good quality I’ve watched your videos since i got my own gt i did exactly what you did in this vid and I’m making 803 to the wheels ps. Not saying 21k isn’t a accomplishment bcus it is i just think you deserve more!
Looks bad ass and on top of safety at the track, it's the only way to properly do a harness. 100% worth the effort IMO.
*update* the reason he hasn’t been uploading is because his mom passed away recently and he hasn’t really been in the right state of mind to upload, but he does upload to his Instagram still since he does own a detailing company/performance shop. Just look him up on Instagram if ya want more info. He will post just not sure when on RUclips.
Love your videos brotha! nice to kno that I can do tons of work on my gt350 if I wanted to with your helpful videos! MAD respect
Have you seen my friend gavin I mean jeff?
Clean install, loving the mods!!!
Thanks brotha!!!
Its good to see handling mods installed and you did an excellent job, she looks good.
Hope you're doing well Jeff. I know life can change quickly. Best wishes and hope to see you are doing well soon.
Xendral Xenthraldious he’s dead
@@texasowl5356 wat??
Nice work. Glad you have the patience to do it right.
DAY 11 thanks man! 🙌 I'm glad everything went smoothly!
red looks good for the cage
Spot welds are not symmetric on most cars, try measuring off stamped holes. Cross reference by make a measurement between the holes first, with a tram gauge or a regular tape measure.
Very good my boy Jeff keep up and love video 💯
Dominic Kirkwood thanks Dominic, appreciate it brotha! 👊
Hey you so very welcome bro keep up 😇
I’m doing the same with my 10r80...looking forward to seeing another stang that’s not all drag setup
Ummm where's Jeff?
That is my favorite ARS
Great install Jeff.
Awesome work man. Wish I had the patience to do this to mine as well... as many said; I’d be scared I’d mess something up!
Thanks Aaron, you definitely have to take your time with it. Did you ever get to book a slot at track attack?
Jeff Ashton I called and was put on the waiting list as you did...I told them I would like to do the 2 day; hopefully I hear back from them and can plan it. Looks like you had a blast!
Jeff Ashton you die at track attack?
Hey Jeff, where'd you go?
That looks amazing
EV1L GTO thanks man, can't beat it! Looks good and is functional. 😁
Miss the content brother. Hope the Shelby is running strong.
Any new GT350 videos coming soon?
Ashley is an amazing co-pilot.
Please make more videos Jeff 😀
Wow! Nice job Jeff. You have a ton of patience. This would drive me nuts & id never attempt this in my 17-350. I’d be so nervous & I know I’d FK it up. Lol. Again, Great job. Thanks for sharing.
I'm really glad I broke it up over three days or I would've lost it at some point haha. I probably lifted up the car and checked the brake lines about six times to be certain I wouldn't hit them. Well worth it now that it's installed though! 😁
You OK Jeff? Been away for a while. Any regrets on the Roll Cage?
fourtraxer 😂😂😂😂😂
Any issues with rear view mirror views?
Nice video the red looks good. I was thinking about putting one in my super snake and I’m 6’4” and was worried about lean the seat back and it sitting comfortable for me . Can you let me know how far the seat will go back with you in it, thanks
Also a concern of mine. Jeff made it look easy crawling around inside the car since he's a bit shorter.
It will go all the way back on the seat tracks, but the seat back can't be reclined all the way.
j240z, it was tough even for me and I'm pretty flexible. You are in tight quarters once that bar goes in and it can get a bit uncomfortable!
I hear ya brother. There isn't much room in these as it is.
Thanks for the reply
black or lightning blue would have been badass also
Does anyone know what happened to this guy?
Drilling into your Mustang....gives me the chills
Dirt Shaker why? 😦
I just installed a spoiler on my 2017 GT. I had to drill into the trunk lid. It was scary!
Hey Jeff, where have you been?
Awesome install.
Thanks man! 👊
Wheres the vids jeff??
Looks great
Hey Jeff, havent seen much lately on the channel. Hope youre doing well!
Anyone find Jeff yet?
Travis Fennell I looked on his social media and found that people are saying he took payment for mustang parts and ran. So I think he may be in jail.
@@WPGT I hope not he seemed to be a good guy but who knows.
I hope you’re all good Jeff. We know you RUclipsrs have lives and priorities beyond this but 2 months got me hoping you’re okay. Anyway miss the content and hope your in good health💪🏾
Hey Jeff......really hoping everything is OK. I miss your videos but, more than that, I just hope all is well with you.
Where have you been I was expecting to see you in some videos on Mustang week :(
Jeff just got my new engine in it’s a MMR 2000 hp Long block 5.2L putting on a 4.5L Whipple on it got blower in Friday they sent black not polished like I ordered now they have to resend the correct one 😞 I was hoping to make it to mustang week in myrtle beach in September this is a video of engine
ruclips.net/video/J2tNttMAQj0/видео.html
Can't wait to see the Ford Performance Driving School video!!!
It was an amazing experience. I was pretty sad when it was over lol.
My name is jeff
Super nice job. Look Bad Ass!!!!!
Thanks Michael! 🙌
Damn I forgot all about this channel!👀😏
allen cox 😰😰😰 got some more vids coming soon. 🙂
Jeff Ashton awesome ....I’ve seen what’s in store on instagram 🙂
Congrats on your install and for posting. I installed CoolTech Roll Bar in my GT350 instead of Watson but
But install does take patience.
What happened to this dude give us an update
How many Mustangs do you have? I think I saw at least 4 besides the GT 350.
Any new videos your working on?
Cool Video and nice to see 👌. I would never drilling holes in a Shelby 😂
It's really not a big deal haha. 😁 If I ever removed it nobody would know the difference. Easy to replace the trim panels that I cut too!
Where have you been!!? Update me on you shifter. What do you think of it?
The fox !!!!!!!!!!!!!!
She's foxy! 😜
Very nice brother
Dude what happened? Where have you been? You still have the stangs?
@JeffAshton
Jeff Ashton, paging Jeff Ashton
Idk if you still read comments, I’m thinking about getting a 350 in the next couple of months but I was wondering how much your monthly payment is?...
i was wondering where the hell you were man!
Leon my bad brotha!!! I'm still alive I promise. 😁
Ummm Jeff .... come in, Jeff.
the 2018 ford mustang gt is faster than the gt350 what are you doing?
Jeff Ashton, Where you at my man!!!
Dam jeff thought you were dead...lifestyle joyride and dbp has been burning video up were you been man
nova2874 that work life. 😫 We'll be getting back to a lot more content soon. 👍
Know the verry well
I saw Jeff on the back of my milk... Came to see if anyone found him yet... I checked under my bed and nothing
I’m back! No worries! #AshtonGang 🐎🐎🐎🐎 oh yeah check out my insta Jeff. TODAY!
Lee Bostic I will brotha!!! Always being an OG! 💪
I believe his mother passed away. May she Rest In Peace.
So...what happened to Jeff? Hope he’s ok.
Where you atttt
4 months since last video,r u Alive?
Guess not...😑
make more videos
Anyone kno what happened to this man ?
Jeff, where in the world did you go man??? You just dropped off the radar man.
Are you okay Jeff?? Miss your content dude :/
1 month ago... 😔
You should powdercoat the calipers red since theres so many red accents now
I completely agree, GT350R calipers are on the list! The red calipers will go perfectly IMO. I would paint them but would want to pull the calipers off anyways to do it right.
Are you interested in selling your rear seat ?
Did you run away? 3 months since an upload, your subs miss the content!
Jeff, what a great job. I have a lightning blue 2017 GT PP. I've already done 6 track days and it is great except the rear diff overheats on hot days but this is only when I really push it. A light comes on in the center dash so I just pull off and no problems. This is usually after 15 minutes of hard laps.
Anyway, your car looks great. Go become a track monster! I'm blowing away very expensive cars after two full days of instruction and a few other events just driving around the track as best I could. BTW, Mustangs are not the easiest cars to get around the track. Instruction was key.
Thanks man! The performance pack is no slouch on the road course. I went to the Ford Performance Racing School and learned a ton in the two days I was there. I'll have a video out soon on it. I had the GT on day two and it was just as fun!
legend has it that jeff bought a camaro ss on aug. 3, 2018 and quietly drove away into the sunset.
I want to get a 350 but i wanna swap the manual.. is there any complications with swapping transmissions.??
just go on power by the hour they have everything you need for swap, I'm doing the same to my terminator at the moment autoswap 6r80 transmission
What a waste of time and money ...