@@peterdement I've had one for a long time and made several videos with it Don't think I've done one with the 10 round mag yet but I've already got several of those too 😉
@@Mrlaidlesslethal I've shot it at 99 and I shoot it consistently in the '60s and '70s. And I'm talking lots and lots of shooting and have never had one break except on impact and they only break on impact if you're shooting them into concrete or hard steel. The heavier weight the projectile the less epoxy it has on the nose in front of the bearing so some of the ones we were making that were 13 g's were more fragile as far as the tip breaking off on impact. It is important to use a pressure pot when you do it to get all the micro air bubbles out which strengthens it a little bit but even not doing that I never had one break in the launcher they just don't look as good, lol epoxy is tough
I like these and i wish someone would actually shoot something up close like a real self defensive move ... if you need to save your life with this it is going to be up close and peroneal ya no. Unless your shooting pepper/cs.
I think you should watch more of my videos, lol. I'm pretty sure I've shot bees and everything else from about every distance imaginable even point blank
Hi I have 2 questions.. can you tell me how to remove my front factory sight on my Fsc….2 is it ok to lube the inside of my Fsc barrel if yea should I use wd40 or gun oil
There's a tiny little set screw that you need a tiny little Allen key to remove in order to get the front sight off. There is never any reason you need to oil the inside of your barrel other than passing a lightly oiled or silicone drag down it if you want to and I would use either gun oil or silicone but it definitely not necessary in these applications
Consider acquiring and reviewing the Pepperball TRP with the 10 round PPC magazine.
@@peterdement I've had one for a long time and made several videos with it Don't think I've done one with the 10 round mag yet but I've already got several of those too 😉
I just creamed seeing all of them bad ass TCP's, 😆... keep up the awesome vids! ...
Wicked!! 👍✌️
Will epoxy resin break when firing at 55+ joules or just on impact?
@@Mrlaidlesslethal I've shot it at 99 and I shoot it consistently in the '60s and '70s. And I'm talking lots and lots of shooting and have never had one break except on impact and they only break on impact if you're shooting them into concrete or hard steel. The heavier weight the projectile the less epoxy it has on the nose in front of the bearing so some of the ones we were making that were 13 g's were more fragile as far as the tip breaking off on impact. It is important to use a pressure pot when you do it to get all the micro air bubbles out which strengthens it a little bit but even not doing that I never had one break in the launcher they just don't look as good, lol epoxy is tough
@@DK-Spencer amazing thank you for this information!
naztee vid pops u kno im thinking u can probally use some type of fuel line to make some slugs mabey for the 5o cals idk just a thought
😍 beautiful
Im so giddy i just pooped myself.
@@Boohpoop 😂😂
I like these and i wish someone would actually shoot something up close like a real self defensive move ... if you need to save your life with this it is going to be up close and peroneal ya no. Unless your shooting pepper/cs.
I think you should watch more of my videos, lol. I'm pretty sure I've shot bees and everything else from about every distance imaginable even point blank
@@DK-Spencerok...
@@ramboii2324 Bees was a typo, but ironically I've actually got at least one video where I shoot bees with a TCR🤣
Hi I have 2 questions.. can you tell me how to remove my front factory sight on my Fsc….2 is it ok to lube the inside of my Fsc barrel if yea should I use wd40 or gun oil
There's a tiny little set screw that you need a tiny little Allen key to remove in order to get the front sight off. There is never any reason you need to oil the inside of your barrel other than passing a lightly oiled or silicone drag down it if you want to and I would use either gun oil or silicone but it definitely not necessary in these applications
@@DK-Spencer o thank you
I have a tiny hex key I still can’t remove sight
No matter which one I put in the hole it just turns it grips nothing to turn
how do they work in the cold like 32 degrees type shyt like it is now
You can use Nitrogen or CO2 powelets depending on weather conditions.
Your kidding me like real co2 thanks man I didn't ever think of that
@@TheL8P nitrogen is not something you want to use, they don’t keep the same pressure
Can these really stop someone
The tcp and fsc are the same gun right?
Basically. FSC can be converted to use air easily, TCP not so much
Where did you get that compensator
Mercy Less Lethal