One additional thing that helped me was you need to double tap the power button on the receiver for the signal to be sent through. I was having trouble viewing the footage on my monitor, all I was seeing was the Zhiyun logo. But my brother read in the manual that you have to press the power button twice (once everything is connected) and it worked! Hope this helps!
OMG!!! I have had this for a YEAR and i gave up months ago trying to get it to connect. i have a short film coming up and i needed this to work and i just saw you comment after watching this video many times. I even had no luck with customer support. But this worked instantly!!!!! THANK YOU!!
I found the Zhiyun wi-fi on my phone and connected to it no problem. (after it sent me to the ZY Play settings screen from the first connection attempt) But now when I go back to the app like you said, it states that it didn't detect a device? When I click on it to connect it keeps sending me back to the Zhiyun settings screen. Need a little assistance if you can help.
I purchase the remote and receiver. Not sure when i connected both via usb to copy settings is i copy the receiver to the transmitter on accident. Now i can get no picture on the transmitter alone. Is so frustrating to deal. I purchase the pro package in early november is today i cant get it to work properly FRUSTRATIONS over 1500 expend and doesnt work Marcel can you help please
Hi Martin, can you record your entire setup process with your phone, upload ur video unlisted and send it to me at marcel.brandel@live.com. So I can help and try to figure it out for you?
Hi. I installed per instructions. Couldn't connect to it using ZY Play at first but then read a comment that suggested turning off data access on my cell. That solved the problem. I was immediately able to connect. The image I get is amazing with little noticeable lag. The only issue is that the gimbal is too responsive to the joystick or motion control. Is there a way to reduced the sensitivity so that I allows for slower response?
Hola compre el crane 3 s full equip y solo viene 1 transmisor y el mango electrónico no tiene conector, solo es para montar en el Crane 3s. La pregunta es... Que puedo hacer con un transmisor? Desde el Teléfono 📱 puedo mover el Crane para que me va a servir un transmisor? Gracias por los tutoriales muy bien explicados 👏🏻👏🏻👏🏻
Mmmm..followed your instructions over and over again and still not receiving a signal, even though my iPad and iPhone receive it nonetheless. Is there any way to update the firmware on the receiver ONLY. Also, is there anyway to reset both devices and start from scratch?
Found a solution here in the Comments. West Houston Christian Center wrote: >>One additional thing that helped me was you need to double tap the power button on the receiver for the signal to be sent through. I was having trouble viewing the footage on my monitor, all I was seeing was the Zhiyun logo. But my brother read in the manual that you have to press the power button twice (once everything is connected) and it worked! Hope this helps!
Have you tried to transmit the signal from your Red Dsmc2 to a monitor? I’d love to see if it’s possible so I might rig up my very own follow focus system on a budget . Thank you
hi it is possible to use the Zhiyun wireless image transmitter with the RED but for focus usage I don't recommend and would rather recommend something like a teradek bolt
i just get a white blank screen with the logo Zhiyun...all the light are green. I use it without stabliser jsute camera>transmitter translitter>monitor feelworld . did I odo something wrong? they are paired
hi to all of you.. just bought the transmitter 2.0 and crane 2s.. all works out perfect except from one issue.. while using them, i loose the display on my camera panasonic gh5.. is there a way to use both screens, iphone AND camera? thx in advance
I'm having problems with my receiver. Transmitter works fine with my smart phone but it's not connecting with my receiver. I've paired it several times and followed the tutorials on the Zhiyun website. Are there any more tutorials for trouble shooting?
Hi all. I was wondering if i could get some help/advice. I am having trouble with the Zhiyun motion remote. It is showing no connection to my Crane 3S. There is video between the transmitter and receiver just fine. I have update the firmware on all items. The crane is v1.80, trans/receiver are v2.07 and the remote is v1.83. I have tried multiple cables and still nothing. Any advice would be great. Many thanks.
hi it depends on the enviroments, and distance, sometimes it does sometimes it doesn't. For simple small cool creative shots it's good but for proper client work I will recommend something like a teradek bolt
I just bought the Crane 3S Pro, For use it with my Sony FX9 (last update on it) And when i want to use the wireless image modul it doesn't work. But when i try with my sony Alpha 7SII it is working fine. I don't understand, I set the output video signal hdmi on HD How i can do Thanks for your help
hi with the FX9 make sure when u do the output setting to also check and test all different resolution and frame rates and see which one works, it usually should i have in the playlist a fs7 setup tutorial and inside that i have a menu walkthru, make sure to check that one out too in regard of settings, might help and is similar
My receiver just does not work anymore. HDMI signal is 1080p25, paired a thousand times, but I only see the Zhiyun logo on my Shinobi. Through my iPhone and ZyPlay I see a LIVE image from the transmitter. But the receiver does not work any more. Green light is on constantly. If OTA is the firmware, then I have version 2.01. Can there be another reason why it does not work that is not included in this video? Mein Receiver funktioniert einfach nicht mehr. HDMI Signal ist 1080p25, tausendmal gepaired, aber ich sehe auf dem Monitor nur das Zhiyun Logo. Über mein iPhone und ZyPlay sehe ich ein LIVE Bild vom Transmitter. Aber der Receiver will nicht mehr. Grüne Lampe leuchtet konstant. Wenn OTA die Firmware ist, dann ist es Version 2.01. Kann es noch einen Grund geben, weswegen es nicht geht, der nicht in diesem Video enthalten ist?
hiii, also wenn der Empfaenger das Zhiyun logo anzeigt, dann ist die Verbindung eigentlich richtig aufgebaut. Es liegt vermutlich an der Kamera. Hast du da alle output resolutions mal ausprobiert? Oder einen anderen external monitor beside Shinobi? Weil ich hatte persoenlich schon immer viel Probleme mit Atomos monitore gehabt, weil die oft ein spezielles HDMI Kabel brauchen.
@@marcelbrandel9078 Hi Marcel, danke für die Antwort. Ich habe die Lösung hier in den Kommentaren gefunden. Man muss, wenn man das Zhiyun Logo sieht, tatsächlich zweimal den Power-Knopf am Receiver drücken, dann wird das Videobild angezeigt. Völlig unverständlich, warum Zhiyun so eine 'Funktion' einbaut. Ich dachte ernsthaft, der Empfänger sei defekt, und wollte die Funkstrecke schon entsorgen. Vielleicht kann man an geeigneter Stelle noch nachträglich einen Text-Hinweis in dein Video einpflegen und die Info ergänzen. Viele Grüße
One additional thing that helped me was you need to double tap the power button on the receiver for the signal to be sent through. I was having trouble viewing the footage on my monitor, all I was seeing was the Zhiyun logo. But my brother read in the manual that you have to press the power button twice (once everything is connected) and it worked! Hope this helps!
OMG!!! I have had this for a YEAR and i gave up months ago trying to get it to connect. i have a short film coming up and i needed this to work and i just saw you comment after watching this video many times. I even had no luck with customer support. But this worked instantly!!!!! THANK YOU!!
@@YorkeTheDirector Glad it worked for you! 😀
@@whcclive Thanks! That helped a lot!
Is this work with simple zhiyun crane 3 lab? Not s
I found the Zhiyun wi-fi on my phone and connected to it no problem. (after it sent me to the ZY Play settings screen from the first connection attempt) But now when I go back to the app like you said, it states that it didn't detect a device? When I click on it to connect it keeps sending me back to the Zhiyun settings screen. Need a little assistance if you can help.
Did you solve the problem? If yes, how? :))
Will this work on a AG DVX200?
I purchase the remote and receiver. Not sure when i connected both via usb to copy settings is i copy the receiver to the transmitter on accident. Now i can get no picture on the transmitter alone. Is so frustrating to deal. I purchase the pro package in early november is today i cant get it to work properly FRUSTRATIONS over 1500 expend and doesnt work Marcel can you help please
Hi Martin, can you record your entire setup process with your phone, upload ur video unlisted and send it to me at marcel.brandel@live.com. So I can help and try to figure it out for you?
Hi. I installed per instructions. Couldn't connect to it using ZY Play at first but then read a comment that suggested turning off data access on my cell. That solved the problem. I was immediately able to connect. The image I get is amazing with little noticeable lag. The only issue is that the gimbal is too responsive to the joystick or motion control. Is there a way to reduced the sensitivity so that I allows for slower response?
Just found out how to change the settings from the ZY Play app in the scenes menu. Works fantastic now!
How did you do that??? I mean turning off data access? Ive bought the Transmitter 2 years ago and can't still use it
Hola compre el crane 3 s full equip y solo viene 1 transmisor y el mango electrónico no tiene conector, solo es para montar en el Crane 3s. La pregunta es... Que puedo hacer con un transmisor? Desde el Teléfono 📱 puedo mover el Crane para que me va a servir un transmisor? Gracias por los tutoriales muy bien explicados 👏🏻👏🏻👏🏻
Mmmm..followed your instructions over and over again and still not receiving a signal, even though my iPad and iPhone receive it nonetheless. Is there any way to update the firmware on the receiver ONLY. Also, is there anyway to reset both devices and start from scratch?
Oh, I see, you have the same problem like myself. Could you solve it?
Found a solution here in the Comments.
West Houston Christian Center wrote:
>>One additional thing that helped me was you need to double tap the power button on the receiver for the signal to be sent through. I was having trouble viewing the footage on my monitor, all I was seeing was the Zhiyun logo. But my brother read in the manual that you have to press the power button twice (once everything is connected) and it worked! Hope this helps!
Im still having issues. i have the transmitter 2.0 for the crane 2s. not sure how to update. HELP PLEASE!
zhiyun app keeps asking iPhone for permission no matter what i do . please help
Have you tried to transmit the signal from your Red Dsmc2 to a monitor? I’d love to see if it’s possible so I might rig up my very own follow focus system on a budget . Thank you
hi it is possible to use the Zhiyun wireless image transmitter with the RED but for focus usage I don't recommend and would rather recommend something like a teradek bolt
i just get a white blank screen with the logo Zhiyun...all the light are green. I use it without stabliser jsute camera>transmitter translitter>monitor feelworld . did I odo something wrong? they are paired
hi to all of you.. just bought the transmitter 2.0 and crane 2s.. all works out perfect except from one issue.. while using them, i loose the display on my camera panasonic gh5.. is there a way to use both screens, iphone AND camera? thx in advance
Hi I remember I had to change some settings inside the HDMI settings of the GH5 to be able to see both, try also only use output resolution 1080p
What was the issue with the older monitor? Beyond HDMI Are there specific requirements from the monitor?
hahaha, it was just really toooo old.
i don't think it will matter now which monitor u use
I'm having problems with my receiver. Transmitter works fine with my smart phone but it's not connecting with my receiver. I've paired it several times and followed the tutorials on the Zhiyun website. Are there any more tutorials for trouble shooting?
Hi Mario, maybe you already did but just to double check, did you check out this one yet?
ruclips.net/video/lxnNzpCdOPE/видео.html
Hi all. I was wondering if i could get some help/advice. I am having trouble with the Zhiyun motion remote. It is showing no connection to my Crane 3S. There is video between the transmitter and receiver just fine. I have update the firmware on all items. The crane is v1.80, trans/receiver are v2.07 and the remote is v1.83. I have tried multiple cables and still nothing. Any advice would be great. Many thanks.
hi have you selected ccs under camera on the gimbal settings menu?
@@marcelbrandel9078 yes I have. Still nothing. 😭
@@marcelbrandel9078 HOLD UP! I have success. I had a bad cable. I tried another and voila!! Thank you 😊👍
hi, I have ghost images problem when I perform camera movements, is it my problem or does it happen a little at all?
hi it depends on the enviroments, and distance, sometimes it does sometimes it doesn't. For simple small cool creative shots it's good but for proper client work I will recommend something like a teradek bolt
I just bought the Crane 3S Pro,
For use it with my Sony FX9 (last update on it)
And when i want to use the wireless image modul it doesn't work.
But when i try with my sony Alpha 7SII it is working fine.
I don't understand, I set the output video signal hdmi on HD
How i can do
Thanks for your help
hi with the FX9 make sure when u do the output setting to also check and test all different resolution and frame rates and see which one works, it usually should i have in the playlist a fs7 setup tutorial and inside that i have a menu walkthru, make sure to check that one out too in regard of settings, might help and is similar
@@marcelbrandel9078 thx a lot
My receiver just does not work anymore. HDMI signal is 1080p25, paired a thousand times, but I only see the Zhiyun logo on my Shinobi. Through my iPhone and ZyPlay I see a LIVE image from the transmitter. But the receiver does not work any more. Green light is on constantly. If OTA is the firmware, then I have version 2.01. Can there be another reason why it does not work that is not included in this video?
Mein Receiver funktioniert einfach nicht mehr. HDMI Signal ist 1080p25, tausendmal gepaired, aber ich sehe auf dem Monitor nur das Zhiyun Logo. Über mein iPhone und ZyPlay sehe ich ein LIVE Bild vom Transmitter. Aber der Receiver will nicht mehr. Grüne Lampe leuchtet konstant. Wenn OTA die Firmware ist, dann ist es Version 2.01. Kann es noch einen Grund geben, weswegen es nicht geht, der nicht in diesem Video enthalten ist?
hiii, also wenn der Empfaenger das Zhiyun logo anzeigt, dann ist die Verbindung eigentlich richtig aufgebaut. Es liegt vermutlich an der Kamera. Hast du da alle output resolutions mal ausprobiert? Oder einen anderen external monitor beside Shinobi? Weil ich hatte persoenlich schon immer viel Probleme mit Atomos monitore gehabt, weil die oft ein spezielles HDMI Kabel brauchen.
@@marcelbrandel9078 Hi Marcel, danke für die Antwort. Ich habe die Lösung hier in den Kommentaren gefunden. Man muss, wenn man das Zhiyun Logo sieht, tatsächlich zweimal den Power-Knopf am Receiver drücken, dann wird das Videobild angezeigt. Völlig unverständlich, warum Zhiyun so eine 'Funktion' einbaut. Ich dachte ernsthaft, der Empfänger sei defekt, und wollte die Funkstrecke schon entsorgen. Vielleicht kann man an geeigneter Stelle noch nachträglich einen Text-Hinweis in dein Video einpflegen und die Info ergänzen. Viele Grüße
@@franzmane ok, vielen dank