The 4th reason to install headers on your E46

Поделиться
HTML-код
  • Опубликовано: 29 сен 2024
  • For POV drive video with all these mods (great sound): • POV Drive - E46; Sound...
    After sound, power and appearance, there's also weight reduction. My ebay headers are 11 lbs lighter than OEM.
    @threepedalgarage993
    #e46 #headers

Комментарии • 56

  • @krihpt
    @krihpt Год назад +17

    Hey, can you pls send a link to those headers and an update to how it performs and sounds? Thanks

    • @threepedalgarage993
      @threepedalgarage993  11 месяцев назад +1

      They sound amazing, 0-60 is down to 6.1 seconds. I uploaded a couple vids driving it.

  • @asernzengue4604
    @asernzengue4604 Месяц назад

    Does it work also on e53 m54b30 engine ?

  • @cameronscotty3671
    @cameronscotty3671 5 месяцев назад

    any idea how they sound with stock exhaust?

  • @R4MIREZ.
    @R4MIREZ. Месяц назад +2

    Me wanting to do this but live in Cali 🤦🏽‍♂️

  • @arjunkhatau609
    @arjunkhatau609 3 месяца назад

    These are genuinely an awful job to do

  • @revaztkemaladze7250
    @revaztkemaladze7250 7 месяцев назад +1

    The catalyst is e46 m54. I want to install bmw e60 M54. Is it the same ?will go without modification?

    • @e5re
      @e5re Месяц назад

      e60 m54 isnt good for tuning.

  • @namvo3909
    @namvo3909 Год назад +12

    325 or 330? Same question as @joemiller

    • @Personal_CMA
      @Personal_CMA 9 месяцев назад

      330 unless he put silver grills on a 325

    • @Personal_CMA
      @Personal_CMA 9 месяцев назад

      Nvm ge said its a 325 in another comment

  • @_stock.sti20
    @_stock.sti20 8 месяцев назад +1

    Do you need a tune after it before?

    • @threepedalgarage993
      @threepedalgarage993  8 месяцев назад +1

      Don't neeeed it but gets the most power and can prevent ses/cel lights.

  • @Samestori214
    @Samestori214 Год назад +2

    Does your engine light stay on because of not having cats?

    • @threepedalgarage993
      @threepedalgarage993  Год назад +1

      Yeah but that's what a tune solves; you really need one to take advantage of the air flow.

    • @Samestori214
      @Samestori214 Год назад

      @@threepedalgarage993 will it be able to pass the emissions test?

    • @threepedalgarage993
      @threepedalgarage993  Год назад +2

      @@Samestori214 no, because you lose your cats. I live in Ohio which does not test.

    • @Samestori214
      @Samestori214 Год назад +1

      @@threepedalgarage993 ok. I'm moving there now. 😆

    • @threepedalgarage993
      @threepedalgarage993  Год назад +1

      @@Samestori214 Some of the best driving roads in the world are 45 minutes away in SE Ohio. If I ever get my builds done I'll post some driving vids.

  • @Solo-nz4pg
    @Solo-nz4pg 11 месяцев назад +1

    What headers are they

  • @nunyabusiness7405
    @nunyabusiness7405 4 месяца назад

    where did you get the headers????????????????????????

    • @threepedalgarage993
      @threepedalgarage993  4 месяца назад

      On eBay but this was 3 years ago and they're no longer in business. I think they were $150 and made in Taiwan so anything similar would work. Took to fabrication because they were too short to meet the mid pipe.

    • @nunyabusiness7405
      @nunyabusiness7405 4 месяца назад

      @@threepedalgarage993 i got a set of headers from a place... they 98% fit the head but the header flanges to exhaust flanges are beyong kooked up so ill be fabbing...

  • @brandonbradley5305
    @brandonbradley5305 9 месяцев назад +1

    Does it come with a dfouler so you don’t have a check engine light?

    • @threepedalgarage993
      @threepedalgarage993  9 месяцев назад +1

      No but you're going to want a tune to take advantage of the better air flow. I've seen as low as $200 and they can override the CEL.

  • @Functionull_
    @Functionull_ Год назад +1

    Nice Ohio local! How was the install of the headers? Any bending needed or awkward fitment?

    • @threepedalgarage993
      @threepedalgarage993  Год назад +1

      Cbus here! Not going to lie its a tight fit against the side of the engine bay, a lot of back amd forth between engine bay and underneath. 1/4 in ratchet helps. The real problem the ebay headers don't fit: I had to seal off the 02 sensor ports and weld in a new section becuase one bank's pipe was too short.

    • @ClipBallerr
      @ClipBallerr 11 месяцев назад +2

      @@threepedalgarage993hey man, if you trim down the second o2 bank to let the sensor be directly in stream, you can relocate your front exhaust sensor to the rear port. And delete the rear sensor as it does not effect performance.

    • @threepedalgarage993
      @threepedalgarage993  11 месяцев назад +1

      @@ClipBallerr this is great advise. Ill have to try this: I'm getting lean bank one codes so maybe related. Ive got the project Focus torn apart and might be looking at an engine rebuild so this will have to wait.

    • @ClipBallerr
      @ClipBallerr 11 месяцев назад

      @@threepedalgarage993 yes! If the o2 sensor isn’t directly in the exhaust stream I know that can mess it up. That’s why you need to trim down the second o2 sensor flange. Also do you have an instagram? Moving to ohio next year and i also have an e46 lol

    • @hollisgreens2885
      @hollisgreens2885 10 месяцев назад

      Where in ohio...

  • @Ray2high
    @Ray2high 11 месяцев назад

    Where did you get them?

    • @threepedalgarage993
      @threepedalgarage993  11 месяцев назад

      Ebay, but the seller no longer exist. I did contact them a couple years witha. Fitment issue and they basically said, sorry they all come from the same factory is Thailand so nothing they cld do to help. Any ebay seller will be the same part I think.

  • @markcos85anthony85
    @markcos85anthony85 Год назад

    Can I put 330ci headers on my 325ci?

    • @threepedalgarage993
      @threepedalgarage993  Год назад

      Well getting a cheap ebay header is always a gamble but I think yes; where I ordered it fits all m52 OR m54 engines. So 323 and 328 OR 325 and 330 if that makes sense. But BMW changed the angle between the headers/ midpipe several times so be prepared to check and return.

    • @asernzengue4604
      @asernzengue4604 Месяц назад

      @@threepedalgarage993 does it fit on e53 3.0i that has m54b30 engine ?

    • @lilbreezi1243
      @lilbreezi1243 Месяц назад

      it might or might not the engine is the same but the exhaust could be bigger since it’s a bigger car look up e46 headers and e53 headers and see if they are the same size

    • @asernzengue4604
      @asernzengue4604 Месяц назад

      @@lilbreezi1243 it the same. 50mm

  • @mannymaciel8622
    @mannymaciel8622 Год назад

    That car weighs 6 thousand pounds. This reasoning is beyond me lol😅

    • @beanerwitbeamer46
      @beanerwitbeamer46 Год назад +4

      Where you get 6k pounds from💀💀

    • @mannymaciel8622
      @mannymaciel8622 Год назад

      @@beanerwitbeamer46 mad typo on my end I thought I typed 4 lol 😂

    • @BarackObama-ke7kn
      @BarackObama-ke7kn Год назад +1

      ​@@mannymaciel8622its only a ton and a half its like 3k pounds??

    • @mannymaciel8622
      @mannymaciel8622 Год назад

      @@BarackObama-ke7kn nah closer to to since you need the 4 k jack to properly lift the jack

    • @mannymaciel8622
      @mannymaciel8622 Год назад +2

      @@BarackObama-ke7kn its actually like closer to 3300 lobs, i don't use a 3 ton jack on this i have to go bigger for safety=/

  • @joemiller4849
    @joemiller4849 Год назад +2

    M54?

    • @HuskkM8
      @HuskkM8 Год назад +1

      Pre sure all facelift e46 coupes are m54

    • @sirspeedsalot
      @sirspeedsalot 7 дней назад

      ​@@HuskkM8 I think all e46 cars period except the M3 are m54 . My 2001 e46 came with m54b25

  • @yourdaddyrsoawesome
    @yourdaddyrsoawesome 5 месяцев назад

    Does the header fits for RHD e46?