रिपेयर आल टीवी आपका बहुत बहुत धन्यवाद🙏💕 करता हूँ, आपके इस वीडियो से काफी सीख मिलीं है, मेरे पास KLV 40v 400A में Ceramic resister खराब था जो कि नया लगाने के बाद टीवी का रिले ओन ओर ओफ हो रहा है, चालू हो रही है, आशा करता हूँ कि इसी प्रकार आप नये और विडियो बनायेंगे, धन्यवाद तहेदिल से 🙏🙏
Thank you for this video. Thanks to you I fixed my 46x4500. I used Ceramic resistor 5W 6.8 Ohm - without temp fuse - because couldn't get any with temp fuse. Works like a charm!
Hey Chris -- My troubleshooting lead me to the same problem. Where were you able to find a replacement for the RWT05 fusible resistor? I can't seem to find them available anywhere online.
@@johnrichards5053 all good! I ended up doing the same. Television works wonderfully! Television and stereo repairs have been my passtime this summer. What a rush when they finally work!
Thank you very much for your clear explanation. I had exactly the same issue and was able to repair the TV by replacing the blown cement thermal resistor with a standard cement resistor of higher wattage and separate thermal fuse. A $500 TV repaired for 60 cents. Brilliant!
This also fixed my tv! THANK YOU SO SO MUCH!!! Now I wonder, after reading comments from so many other people experiencing the same problem...wasnt really SONY expecting this component to fail after some years?? It doesnt seem like there were just a few faulty components. Planned obsolescence?
Thnxs very much you creator of this video.Also for me, or actualy my daughter in law, kept me from throwing the TV away. I could also measure that the component was broken (infinite resistants). So I allready bought a 6,8 Ohm resistor. Later after hammering the broken component i found, A second component, The thermal fuse. After soldering the plain resistor the tv workt again. But i want to have it fused again so gonna go for the ceramic + thermal fuse in ONE despite it is a bit harder to obtain. thanks very much again.
Thank you so much! You saved my day and a new TV. I just had the exact same issue and your step by step instruction helped me so much!!! Cheers and by the way - happy new year!
The picture of the Daewoo 42F 4100 TV is cut off after one hour of working with the backlight on, but we do not have the picture. The image is displayed when we plug in the power plug again
I have those small cables (8gray 1 white) next to The glass on The left side not connected. Is there Any smart way to see which one belongs to The right port/place?
Hello! I have that tv. Thanks to your video I have fixed the TV's ignition. a month has passed and now a screen is seen on the screen that can be removed by deactivating in DRC mode. How can i fix it? Thank you!
tman855r It’s hard to find the part with an inbuilt thermal fuse. You can heat shrink a separate thermal fuse on to the body of the resistor. Wire them in series.
I want to say thank you. You helped me fix my sony kdl-40v4100 I had the same 6.8 ohm resistor go bad. After I watched your video I checked my resistor and it was the problem. Now I replaced it with a 5.6 ohm resistor and tv works now but will this cause a problem???
I have a XBR-55X850d that has a faulty power input/LED driver board (part 16ST012S-A01) and I'd like to repair it. I can get a replacement board but they are a common failure point on these models and I'd like to identify the cause instead of replacing it everytime it fails. Do you happen to have any experience with this model?
I have an LG 23mp55hq-p monitor. The on screen menu works just fine and displays on the screen. When a video device or PC is plugged in it blinks a picture for a split second then goes black for 10 seconds and flashes a picture again. Any guesses as to what the problem is? Could it be just a bad cap?
Hello! I have Sony KDL 40x4500 now I see stripes on the screen that can be removed by deactivating the DRC mode. But that mode is automatically activated again and the vertical lines reappear. How can I fix it? Thank you!
Did you replace the broken resistor with the same type that combines a 6,8 ohms resistor with a 142 °C temperature fuse? Or did you replace it with a resistor without a temperature fuse? I had the same problem mit a Sony KLD 46Z4500 but can't find an online-shop that sells these resistors with the temperature fuse. Do you know any?
Viktoria Hi. I have the same problem. I can only find a replacement from the US and that's going to cost me 70 GBP just for shipping ! I'm in the UK. I cannot find a replacement board either. I have ordered one without the temp fuse just to see if it works.
Blackscienceproject1, I now use this one (without temp fuse): Royalohm 6.8 Ω 5 W PRW05WJW68JB00. Since it's maximum temperature is 155° it may offer some kind of security. So far it works fine. I also have tried combining it with this temp fuse several times: 125 °C 2 A 250 V ESKA A3-F. But it didn't work because the temp fuse died after about 10 hours of usage each time. The resistor is still fine though that's why I use it without the temp fuse for now. I have no idea why the temp fuse died.
Viktoria Hi interesting indeed. I was considering doing what you have tried. I am a little worried that we should be using a temp fused resistor though as I have seen what happens when a resistor overheats and it could be a fire. I will check out the one you got..thanks for the info
Blackscienceproject1 One more thing: At the beginning I let the TV run for about 3 hours without the back cover and the measured temp of the resistor was only 30°C. Not sure though how great of an effect the back cover of the TV actually has on the temperature, but the temp fuse always died with the back cover on. But I can hardly believe that the back cover on/off makes such a great difference.
Men i ask you in another video. If i note i have a bad transistor and i didnt have the same here and i have several boards from anothers tv with transistor.. what i need to see or know for compatibility or replacement from.another board?? Let me know please help me. I have here a sony bravia with bad transistor but i didnt have here another same part number but have tra sistor from another boards..let me knowm. Amd where did you purchase online or whatever in USA this kind of epectronics. I ask because ebay sells but need to wait a month from china..let me know
Still in 2024, this video saved me a new tv. Thanks bro appreciate it!
रिपेयर आल टीवी आपका बहुत बहुत धन्यवाद🙏💕 करता हूँ, आपके इस वीडियो से काफी सीख मिलीं है, मेरे पास KLV 40v 400A में Ceramic resister खराब था जो कि नया लगाने के बाद टीवी का रिले ओन ओर ओफ हो रहा है, चालू हो रही है, आशा करता हूँ कि इसी प्रकार आप नये और विडियो बनायेंगे, धन्यवाद तहेदिल से 🙏🙏
Thank you for this video. Thanks to you I fixed my 46x4500. I used Ceramic resistor 5W 6.8 Ohm - without temp fuse - because couldn't get any with temp fuse. Works like a charm!
Like your style of video repairs. You keep the chatter to a minimun to say the least. Good job, thank you.
Thank you from France: I could repair my tv with your video, it was the 6,8 resistor!
thank you very much
superbly explained, sharp video
this would be understood by the deaf person
thanks again, greetings from Croatia !!
👍
That was immense! You helped me fix the exact same problem - it was that 6.8 ohm resistor. Many thanks. You are the Big Cheese.
😊😊👍👍
Hey Chris -- My troubleshooting lead me to the same problem. Where were you able to find a replacement for the RWT05 fusible resistor? I can't seem to find them available anywhere online.
or did you just replace it with a normal 6.8 ohm resistor, without the fuse?
@@DillonStrichman Hi dillon,
Sorry for the late reply. I just replaced it with a 6.8 ohm resistor of the same power rating. No fusible.
@@johnrichards5053 all good! I ended up doing the same. Television works wonderfully! Television and stereo repairs have been my passtime this summer. What a rush when they finally work!
Thank you very much for your clear explanation. I had exactly the same issue and was able to repair the TV by replacing the blown cement thermal resistor with a standard cement resistor of higher wattage and separate thermal fuse. A $500 TV repaired for 60 cents. Brilliant!
I'm glad. please share the video. to see others who need that video
Very good video. Detail on how to take apart and how tests were made were Outstanding.
This also fixed my tv! THANK YOU SO SO MUCH!!! Now I wonder, after reading comments from so many other people experiencing the same problem...wasnt really SONY expecting this component to fail after some years?? It doesnt seem like there were just a few faulty components. Planned obsolescence?
Thnxs very much you creator of this video.Also for me, or actualy my daughter in law, kept me from throwing the TV away. I could also measure that the component was broken (infinite resistants). So I allready bought a 6,8 Ohm resistor. Later after hammering the broken component i found, A second component, The thermal fuse. After soldering the plain resistor the tv workt again. But i want to have it fused again so gonna go for the ceramic + thermal fuse in ONE despite it is a bit harder to obtain. thanks very much again.
and saved lot of time and money.
Great tutorial. Fixed my KDL-40Z4500 with the same problem.
Had the exact same problem and was able to fix it after watching your video, many thanks man!
Super ta sama przyczyna , rezystor wymieniony i cacy, dzięki
Just saved my TV. Thank you.
Thank you so much!, My tv works again!
Thank you so much! You saved my day and a new TV. I just had the exact same issue and your step by step instruction helped me so much!!! Cheers and by the way - happy new year!
Thank you so much............👍👌👏
heey thank you, my tv had the same problem. found the problem with your video
very nice and perfect approach, its realy informative n helpful to repair lcd tvs , well done sir
Buen video
The picture of the Daewoo 42F 4100 TV is cut off after one hour of working with the backlight on, but we do not have the picture. The image is displayed when we plug in the power plug again
Thanks from me too! Model KDL-40W4500, same problem!
СПАСИБО ТЕБЕ МОЛЧАЛИВЫЙ ЧЕЛОВЕК!11
I have those small cables (8gray 1 white) next to The glass on The left side not connected. Is there Any smart way to see which one belongs to The right port/place?
Merci pour cette vidéo qui explique très bien comment faire la réparation
The first thing is to check the fuse, not the transistor.
That the way i like it ,not blablabla like the others ,easy to understand
Hello! I have that tv. Thanks to your video I have fixed the TV's ignition. a month has passed and now a screen is seen on the screen that can be removed by deactivating in DRC mode. How can i fix it? Thank you!
Great troubleshooting! Thanks for posting this! God bless.
thanks for the upload
I have 40kdl and have 3 blinks
Hi,
I need to do the same repair,…but I can’t find the fully correct resistor anywhere,…can you maybe tell me where to find it ?
can also install 5.0 ohms. no problem
Oh,..okay thanks,...but how about the thermal fuse ?
tman855r It’s hard to find the part with an inbuilt thermal fuse. You can heat shrink a separate thermal fuse on to the body of the resistor. Wire them in series.
I have sony bravia kd-65xd8599 stoped working haave no power at all .. every test on board is ok . What's the problem?
Muchas gracias por compartir intentaré reparar mi TV. Time toda la pinta que es este fallo.
I want to say thank you. You helped me fix my sony kdl-40v4100 I had the same 6.8 ohm resistor go bad. After I watched your video I checked my resistor and it was the problem. Now I replaced it with a 5.6 ohm resistor and tv works now but will this cause a problem???
there will be no problem
Mjeshter i fort je 👍👍
Very thorough thank you great repair
You are professional 🌹 thank you 👍👍👍
I have a XBR-55X850d that has a faulty power input/LED driver board (part 16ST012S-A01) and I'd like to repair it. I can get a replacement board but they are a common failure point on these models and I'd like to identify the cause instead of replacing it everytime it fails. Do you happen to have any experience with this model?
Worked for me, hourra & thank you very much !
I have an LG 23mp55hq-p monitor. The on screen menu works just fine and displays on the screen. When a video device or PC is plugged in it blinks a picture for a split second then goes black for 10 seconds and flashes a picture again. Any guesses as to what the problem is? Could it be just a bad cap?
I have the same problem with my lcd tv. But mine only turns on when I apply hot air to the power supply board
Sir I have a television klv 40x450A same TV logic card missed can u show that logic card how is looking
Where do you put the black pin?
Hello! I have Sony KDL 40x4500 now I see stripes on the screen that can be removed by deactivating the DRC mode. But that mode is automatically activated again and the vertical lines reappear. How can I fix it? Thank you!
Sir mere pass b Sony Bravia(lcd) h. Usme b same problem aarha h.
Repairing cost kitni hogi..
Plz suggest
Buen video gracias por su aportes
thank you for the video
Thanks you very much!!!
Sony lcd cx32x350 main filter bridge Rectifier 260dc volt coming 320v nothing problem.? reply sir
Good teacher thank you
SonyKLV 32cx350 power stage Rectifier Main Filter DC vold 260v coming but 320v Nothing what problem soultion sir Reply New filter changed
Great
I was waiting for him to get zapped cause he never discharged the caps.
Hi i have two blinks on my SONY BRAVIA 32BX350 it doesnt power up it gives me grean lighr then 2 red blinks how do i fix this plzz
Thanks thanks thanks! Happy 2020
sl ami bon courage
Hi
I have a 55 inch led sansui with no power at all.
Please help
how can you measure non zero voltage for unplugged board?
devant TV no display, but standby light is on, any idea?
Very nice
Did you replace the broken resistor with the same type that combines a 6,8 ohms resistor with a 142 °C temperature fuse? Or did you replace it with a resistor without a temperature fuse?
I had the same problem mit a Sony KLD 46Z4500 but can't find an online-shop that sells these resistors with the temperature fuse. Do you know any?
It is best to be original. 6.8 ohms. As if on board
Viktoria Hi. I have the same problem. I can only find a replacement from the US and that's going to cost me 70 GBP just for shipping ! I'm in the UK. I cannot find a replacement board either. I have ordered one without the temp fuse just to see if it works.
Blackscienceproject1, I now use this one (without temp fuse): Royalohm 6.8 Ω 5 W PRW05WJW68JB00. Since it's maximum temperature is 155° it may offer some kind of security. So far it works fine.
I also have tried combining it with this temp fuse several times: 125 °C 2 A 250 V ESKA A3-F. But it didn't work because the temp fuse died after about 10 hours of usage each time. The resistor is still fine though that's why I use it without the temp fuse for now. I have no idea why the temp fuse died.
Viktoria Hi interesting indeed. I was considering doing what you have tried. I am a little worried that we should be using a temp fused resistor though as I have seen what happens when a resistor overheats and it could be a fire. I will check out the one you got..thanks for the info
Blackscienceproject1 One more thing: At the beginning I let the TV run for about 3 hours without the back cover and the measured temp of the resistor was only 30°C. Not sure though how great of an effect the back cover of the TV actually has on the temperature, but the temp fuse always died with the back cover on. But I can hardly believe that the back cover on/off makes such a great difference.
Nice video bro
Boa noite eu sou do Brasil, queria que vc conserta um Sony Bravia kdl 32bx425 não liga?
Men i ask you in another video. If i note i have a bad transistor and i didnt have the same here and i have several boards from anothers tv with transistor.. what i need to see or know for compatibility or replacement from.another board?? Let me know please help me. I have here a sony bravia with bad transistor but i didnt have here another same part number but have tra sistor from another boards..let me knowm. Amd where did you purchase online or whatever in USA this kind of epectronics. I ask because ebay sells but need to wait a month from china..let me know
Google.See specifications of Transistors.
perfecto.
Ceramics ka price kitna hoga market mein
Thx for videos
My tv model. Klv 40 ex 400. Sony t v on after 5 mints off
thank you sir
سلام عليك جزاك الله خيرا
THANK YOU MUCH
👍👍👍
muito bom parabens
Nice
"ok!"
Thank U!
Ser may TV lcd complaint no power
Thanks u sir u r my master
😲👍👍👍
Where i can find this resistance?
i buy at aliexpress. you have it on eBay as well as on amazon
Bad panel on the left side of the tv
Bhai tv open ke liye scru mat dikhaya kro plese
My tv Sony bravia kdl 75w855c 6 red led blinks
Whats he mumbling about?
Also too many crappy ads
Pode mim ajuda?
Hello you can me halp
mirs i ok