Don't laugh. I just sold a yellow 1975 Western Electric rotary phone on FB. It was from my grandparent's house and the person came from the city to the burbs to pick it up at night as it was needed for a photo shoot. I must have had the only yellow rotary phone on FB in the area, because I easily got my asking price for it. Apparently, it was used in a commercial. When I asked about the commercial and if I could have a copy, the buyer stopped communicating. LOL. At about 10:50, that's a "919" DeVilbiss made Sears Craftsman compressor, and it looks to be oil lubed, which is the better design. I have a few of them, but the 1968 CH made Sears I have is probably the best of all of them. Yup, the "B" Series Macks are sharp trucks and are highly collectable. We have one, a 1959 model in our fleet at work. It's kept in storage and when it was pulled out recently, only a cleaning of the points and fresh fuel was needed to get it going again. I have that Tonka yellow grader at about 26:49, along with other Tonkas I got it as a kid. Still in good shape. At about 28:33 that's a Penske (Sears) engine analyzer. They were "244" prefix product made by Peerless Instruments who by about 1983 got bought out by Actron who was supplying the "161" prefix product to Sears. They are now part of Robert Bosch and don't have any information on the old stuff (they used to before the takeover).
Love the Swap. Probably be at the Amarillo Swap coming up in a few days. Looking forward to watching that one also. That is if you video. I think you will.
We were down there Friday freezing to death lol! First time I've been to it. Even though there wasn't just a whole lot of vendors, I still found a few items to spend money on. Would of been cool to run in to you.
That black 71-72 C10 Chevy pickup, $6500 was a good price for it. Looks like some decent cars and trucks there, just not much else. Houston Traders Village swap meet was a good one, lots of nice square body and OBS trucks there.
Yea it was pretty light in Canton. Might have been because the Goodguys car show was going on at the same time. Also it was pretty cold on Friday which may have kept some vendors home
Yes, it was cold in the mornings, but the weather turned out nice on Saturday. Sunday was good too, but a bit windy as people started to leave. I packed up earlier than I usually do, cause I didn't want to chase stuff blowing off my tables. Also I had a buddy helping me, who had to be at work early Monday morning.
Benny anything that is marked on blue tape the camera does not pick it up maybe you could say how much they are selling and the year. You have a good voice people would like to hear from you 😊
Was that panel 1 minute in the ghostbusters vehicle? lol 20 years ago, I used to drive up to Canton a few times a year to hit trades days for great deals on USA Tools and vintage parts....not seeing the same value in this video. Neat stuff but no more small town prices.
I've never been to the first Monday trade days in canton. the swap meet that's held a few times a year is different. Maybe the deals are still there at the trade days
That red Chevy truck we could not see the price no one’s watching this video just for the hell they want to know how much they are if you’re not gonna show the prices why would anyone watch this
Had to give you a down waiting the whole video for the 55 and just about ignore it but you put it for the cover of your video pure bullsh!t calling you out on that.
That Silverado is nice. Lots of cool stuff at the swap meet. Thanks Benny for taking us along.
27:23 I liked how the dog nodded ,.Hey thanks for looking and have a great day.
I remember those rotary phones , in my family's home growing up
You're right Benny... But Remember that there's always a diamond in the ruff. That square body was awesome at 13.5 k. Keep em coming .....
I agree Robert!
Really enjoyed the swap meet ! Thank you so much !! Stay safe and God bless you !!!! Eddy
Don't laugh. I just sold a yellow 1975 Western Electric rotary phone on FB. It was from my grandparent's house and the person came from the city to the burbs to pick it up at night as it was needed for a photo shoot. I must have had the only yellow rotary phone on FB in the area, because I easily got my asking price for it. Apparently, it was used in a commercial. When I asked about the commercial and if I could have a copy, the buyer stopped communicating. LOL.
At about 10:50, that's a "919" DeVilbiss made Sears Craftsman compressor, and it looks to be oil lubed, which is the better design. I have a few of them, but the 1968 CH made Sears I have is probably the best of all of them. Yup, the "B" Series Macks are sharp trucks and are highly collectable. We have one, a 1959 model in our fleet at work. It's kept in storage and when it was pulled out recently, only a cleaning of the points and fresh fuel was needed to get it going again. I have that Tonka yellow grader at about 26:49, along with other Tonkas I got it as a kid. Still in good shape. At about 28:33 that's a Penske (Sears) engine analyzer. They were "244" prefix product made by Peerless Instruments who by about 1983 got bought out by Actron who was supplying the "161" prefix product to Sears. They are now part of Robert Bosch and don't have any information on the old stuff (they used to before the takeover).
Love the Swap. Probably be at the Amarillo Swap coming up in a few days.
Looking forward to watching that one also. That is if you video. I think you will.
I wont be able to make that one unfortunately. I hope someone else makes a video of it though
I really loved those old fire trucks.
We were down there Friday freezing to death lol! First time I've been to it. Even though there wasn't just a whole lot of vendors, I still found a few items to spend money on. Would of been cool to run in to you.
That black 71-72 C10 Chevy pickup, $6500 was a good price for it. Looks like some decent cars and trucks there, just not much else. Houston Traders Village swap meet was a good one, lots of nice square body and OBS trucks there.
Yea it was pretty light in Canton. Might have been because the Goodguys car show was going on at the same time. Also it was pretty cold on Friday which may have kept some vendors home
I heard Houston trader's village was pretty good.
Yes, it was cold in the mornings, but the weather turned out nice on Saturday. Sunday was good too, but a bit windy as people started to leave. I packed up earlier than I usually do, cause I didn't want to chase stuff blowing off my tables. Also I had a buddy helping me, who had to be at work early Monday morning.
This is a good one Benny
Excellent video
Cool video and gave the thumbs up.
👍
That's 5 window 3100 is a good deal!!! I have to get out there. I'm looking for a Chevy Apache
That square body was nice with the red and rims and so was that 71 Chevelle
Red demon cool too … that last rat rod was sick too
Yep, the square body was cool!!!!!!!
@@THROTTLEPOWER 👍👍👍
Enjoyed!!!!!!!!!!!!! 👍👍👍
👍
@@ClassicRideSociety 👍
great video at the swap meet Benny !!
Benny anything that is marked on blue tape the camera does not pick it up maybe you could say how much they are selling and the year. You have a good voice people would like to hear from you 😊
Cannot believe that people still do not post a price. No price means a Fishing Expedition
What day did this swap meet in Canton take place?
How do I find out about these swap meets in the DFW ,Tx area?
It was this weekend. Technically the 10-13 but don't think much was going on on Thursday or today.
Google the tail light king. He has a good list of texas swap meets. There is also the TEXAS Oklahoma classic Auto Swap meets Facebook page
Was that panel 1 minute in the ghostbusters vehicle? lol 20 years ago, I used to drive up to Canton a few times a year to hit trades days for great deals on USA Tools and vintage parts....not seeing the same value in this video. Neat stuff but no more small town prices.
I've never been to the first Monday trade days in canton. the swap meet that's held a few times a year is different. Maybe the deals are still there at the trade days
That red Chevy truck we could not see the price no one’s watching this video just for the hell they want to know how much they are if you’re not gonna show the prices why would anyone watch this
Believe it or not some people do just like to tag along. I try to get most prices of vehicles. I do miss some unfortunately
Cant see the price call it out thanks.
The only thing wrong with the Chevy trucks here , Are they are square body’s , that’s what is wrong with them lol, thanks BigAl California.
Makes the junkyard save it prices look pretty good
Unless it's that one lady at Callahan 😄
Where's al Bundy. He needs this car to sell shoes.
The dodge 😄 👍
Thank you my friend.
I sure hope you didn't pay to enter.
It's free to Park and free to enter.
Had to give you a down waiting the whole video for the 55 and just about ignore it but you put it for the cover of your video pure bullsh!t calling you out on that.
Can't please them all. Oh well. I choose the best image for the thumbnail. That car wasn't for sale. I just liked the look but was on my way out. ✌