All you armchair miners yapping about the truck not being full, y'all understand how heavy iron ore is, right? I drove a Volvo A40g in a limestone quarry. Depending on where in the quarry we were loading from, the size and quality of the stone sometimes 8 scoops weighed 40 tons and sometimes it weighed 55 tons. Some of those big honkers they have on those trucks weigh 10+ tons by themselves.
What an incredible ballet. Guaranteed, the production manager is going to look at this and think of how to reduce the turn time. Lol. How perfectly orderly, controlled, effective, well planned, and efficient this is. This is production at near peak of human expression. Thanks for posting.
What's the delay? Why have a crusher with that massive capacity if the truckies have to wait for some unseen message before dumping? Is this inefficiency or have I missed an explanation somewhere?
im guessing there is a finer crush under this one that has less capacity due to having more material to crush since most stuff falls through the first one. but that is what I think the waiting could be
They are waiting for the operator to tell them when to dump or it'll overload the crusher and belt system. You need to understand just how much material is being dumped at a time. Look at the ladder that's there laying off to the side and compare that to if a human were using it. Some of those rocks are larger than cars.
I agree seems slack But they might struggle downstream of the primary crusher with capacity issues or some other issue. We just don’t and won’t know though Also remember what u see is the primary crusher and there will be secondary and possibly tertiary 3rd crusher which further crushers the ore into finer dust Getting the plant all the way downstream to work in cohesion is a balancing act mate. It’s a difficult thing to get right as equipment slowly wears down Hope that helps you
You don't. They are designed to keep a certain amount of stone in the hopper to keep wear down. If the dumped stone would slide on the steel all the time it ould wear down faster. By keeping rock in it it's rock sliding on rock.
I had 2 of these trucks...moved approx 1 million metric tons of bauxite ore from a storage facility at the corpus christi tx Reynolds Aluminum processing plant over the course of 5 years...your formula is useless without knowing the type of material..density..moisture content...etc...to just says a mass equals weights "X" tonnage is not correct.
Yes , these trucks would be 100 tonne capacity .Because iron ore weighs about 3.3 tonnes per cubic metre about 34 cubic metres is fully loaded .If it was coal the same tonnes would be between 50 &65 cubic metres
I've never worked at any mine where I was ever allowed to load haul trucks that light. Whoever is loading these trucks sure as hell isn't doing there job. Plus you need to add some proper spill boards to the truck boxes.
Is really Funny to watch this Video, ech Dumper has to wait for long Time, so the Cone Crusher can prepair himself to get another maximum 50 T. of Overbourding, let me advice you Peoples to use an Static Screen, and maybe 1 per Week you on this Gyrattory, and Crush the small Ammount of Rock inside, because this is rubbish.! Sorry
We western Australia Australia we giant iron ore mines owned by different companies bhp and fmg and atlas iron and bc iron and riotinto and in 60.s and 80.s I lived in a mining town owned by hamersly iron in tom price and it called mount tom price and eastern range paraburdoo iron ore mine did owned by hamerslyiron and now by rio tinto
I love the comments on this. Every guy has to say they know of bigger trucks. Just appreciate the video for what it is.
Meh. I know of bigger videos to appreciate for what they are.
There will always be a bigger truck 🤓
So what is it? a stone crusher or sand crusher?
Perfect👍👍👍👏🏻👏🏻👏🏻👏🏻
All you armchair miners yapping about the truck not being full, y'all understand how heavy iron ore is, right? I drove a Volvo A40g in a limestone quarry. Depending on where in the quarry we were loading from, the size and quality of the stone sometimes 8 scoops weighed 40 tons and sometimes it weighed 55 tons. Some of those big honkers they have on those trucks weigh 10+ tons by themselves.
Wow that's great !!
I worked for a company where we made those trays
Sizes 90 to 130 ton. Fun days
What an incredible ballet. Guaranteed, the production manager is going to look at this and think of how to reduce the turn time. Lol. How perfectly orderly, controlled, effective, well planned, and efficient this is. This is production at near peak of human expression.
Thanks for posting.
Nice sarcasm
Using more dumpers the capacity of the crusher would be used better.
What's the delay? Why have a crusher with that massive capacity if the truckies have to wait for some unseen message before dumping? Is this inefficiency or have I missed an explanation somewhere?
im guessing there is a finer crush under this one that has less capacity due to having more material to crush since most stuff falls through the first one. but that is what I think the waiting could be
They are waiting for the operator to tell them when to dump or it'll overload the crusher and belt system. You need to understand just how much material is being dumped at a time. Look at the ladder that's there laying off to the side and compare that to if a human were using it. Some of those rocks are larger than cars.
@@Hermiwalle being iron ore that shit needs to be crushed a few times. So yes there would he a secondary crusher under that beast
It's drama building
I agree seems slack
But they might struggle downstream of the primary crusher with capacity issues or some other issue. We just don’t and won’t know though
Also remember what u see is the primary crusher and there will be secondary and possibly tertiary 3rd crusher which further crushers the ore into finer dust
Getting the plant all the way downstream to work in cohesion is a balancing act mate. It’s a difficult thing to get right as equipment slowly wears down
Hope that helps you
Its complette sanded. When where the last big Stones in there? 😮
Full trucks not a thing at that mine?
Compare this to the 360 ton 797 Caterpillars & the 7 or 8 story tall crushers at Morenci Az.
thank's
How often do you clean the feed shute?
By feed chute ,you mean HOPPER?
You don't. They are designed to keep a certain amount of stone in the hopper to keep wear down. If the dumped stone would slide on the steel all the time it ould wear down faster. By keeping rock in it it's rock sliding on rock.
@@justintremblay7657 Source of information? Or you’re just sucking stuff out of your big toe?
That is a site to behold I have six grand children that could shape better
Is there a signal of some sort to initiate a dump?
Yes.
The toilet needs cleaning
i drove the same make and model of dump truck at a quarry . title is wrong they can only carry 22 to 35 tones fully loaded and overflowing.
This video was supposed to be about ore 'crushing ', not just load dumping, right?
Love to know where this is
Today on EMI: private Snuffy cleans out a rock crusher. With a broom.
Слава людям труда...
Звук двигателя Белаза это что-то...
Где ты тут белаз увидел? Белаз это марка. здесь Cat
@@jonnygalante7959 я ошибся,с кем не бывает...
100 ton trucks carrying 50 tons....
1m³=5tons..
I had 2 of these trucks...moved approx 1 million metric tons of bauxite ore from a storage facility at the corpus christi tx Reynolds Aluminum processing plant over the course of 5 years...your formula is useless without knowing the type of material..density..moisture content...etc...to just says a mass equals weights "X" tonnage is not correct.
Are they afraid to fill the truck up, two scoop please
Or the truck has a weight limit
Where is your mine located? Very interesting videos, thank you for sharing.
Odisha (india)
Thanks, keep the videos coming, really enjoy them!
My question is why aren’t there more iron ore on the trucks, do they have weight limits?
Yes , these trucks would be 100 tonne capacity .Because iron ore weighs about 3.3 tonnes per cubic metre about 34 cubic metres is fully loaded .If it was coal the same tonnes would be between 50 &65 cubic metres
How many tons per load?
i see it it about 5tons one each
100
Why such small loads ?
That happens as you get older and your prostate starts to tighten up
Iron ore density is much higher than other similar bulk loads( Earth,coal,sand etc). So a small volume of ore completes its weight limit (100T).
I've never worked at any mine where I was ever allowed to load haul trucks that light. Whoever is loading these trucks sure as hell isn't doing there job. Plus you need to add some proper spill boards to the truck boxes.
a trick : you can watch movies at Flixzone. Me and my gf have been using it for watching all kinds of movies recently.
@Chase Tommy yup, I have been watching on Flixzone for months myself :D
Their
Can i work there..-malaysia-
These are babies. They would fit in the tray of the big ones.
Fe ?
just needed the noise / thank's
I work over here guys
*Imagine if a new driver backed his truck into the pit by accident.*
Thet cant cope with over size boulder never mind a truck
2
100 but 40 actually
크러셔 : 먹어도먹어도 배가고파
Any job for HUALPAK DUMPER OPERATOR
Ammatöe kamera
No one wants to see the trucks moving about, we wanna see rock crushing
Is really Funny to watch this Video, ech Dumper has to wait for long Time, so the Cone Crusher can prepair himself to get another maximum 50 T. of Overbourding, let me advice you Peoples to use an Static Screen, and maybe 1 per Week you on this Gyrattory, and Crush the small Ammount of Rock inside, because this is rubbish.! Sorry
We western Australia Australia we giant iron ore mines owned by different companies bhp and fmg and atlas iron and bc iron and riotinto and in 60.s and 80.s I lived in a mining town owned by hamersly iron in tom price and it called mount tom price and eastern range paraburdoo iron ore mine did owned by hamerslyiron and now by rio tinto
Nathan please call me there at Australia as I'm a crane operator and worked in NMDC on contract basis for 10 years
Sorry but dumoers driving arióund is not interesting at all. No thumbs up.
Terrible camera person
Is the work or the person terrible?
I would rather watch paint dry.
What a waste of time, is that a stone crusher or sand crusher, should have been sifted first.