How to Make a Carborundum Engraving: Guide and Applications

How to Make a Carborundum Engraving: Guide and Applications
Introduction
Carborundum engraving is a type of engraving that uses a carborundum wheel to cut into a surface. It is a versatile technique that can be used to create a variety of effects, from simple designs to intricate patterns.
Materials
The following materials are required for carborundum engraving:
Carborundum wheel
Engraving machine
Lubricant
Drawing or template
Masking tape
Sandpaper
Steel wool
Cleaner
Instructions
Attach the carborundum wheel to the engraving machine.
Apply a thin layer of lubricant to the wheel.
Secure the drawing or template to the surface to be engraved.
Tape off any areas that you do not want to engrave.
Turn on the engraving machine and begin engraving.
Use light pressure to start and gradually increase the pressure as you get closer to the desired depth.
Once you have finished engraving, remove the drawing or template and the masking tape.
Sand the edges of the engraving to smooth them out.
Polish the engraving with steel wool.
Clean the engraving with a cleaner.
Applications
Carborundum engraving can be used to create a variety of designs, including:
Lettering
Symbols
Patterns
Images
It is a popular technique for engraving metal, wood, and plastic.
Tips
For best results, use a sharp carborundum wheel.
Apply even pressure when engraving.
Use a lubricant to prevent the wheel from overheating.
Sand the edges of the engraving to smooth them out.
Polish the engraving with steel wool to give it a shiny finish.
Safety Precautions
Wear safety glasses to protect your eyes from flying debris.
Wear gloves to protect your hands from the sharp edges of the carborundum wheel.
Work in a well-ventilated area to avoid breathing in dust.
Conclusion
Carborundum engraving is a versatile technique that can be used to create a variety of effects. With a little practice, you can learn to create beautiful and intricate engravings.

[@nicolascasanova5204]

excelente video hermano impresionante lo que se puede hacer

[@ortubia_expresionismo]

Muchas gracias!!!! La verdad es que el Carborundum es muy expresivo. Saludos desde España

[@marthaguerrerogarcia555]

Exelente tutorial

[@ortubia_expresionismo]

Muchas gracias 😊

[@ortubia_expresionismo]

Un abrazo fuerte

[@KRLegion]

PODRÍA USARSE UN RODILLO DE ESPONJA NO? DE ESOS DE PINTURA? MUY INTERESANTE ESTA TÉCNICA, MUCHO TRABAJO SÍ.....ESTÁS EN MADRID? ME GUSTARÍA VISITARTE...VIVO EN MADRID ZONA BARRIO DEL PILAR. SALUDOS. TREMENDO VÍDEO...MUY BIEN EXPLICADO, DIRECTO AL GRANO...PROMETE SER UN GRAN CANAL.

[@ortubia_expresionismo]

Que va, mi estudio está en Bilbao. El Carborundum lo puedes aplicar con lo que quieras, con un rodillo no se me había ocurrido. 😊

[@KRLegion]

HOO, QUÉ MARAVILLOSO PLANETA BILBAO....PUES ME ESPERO AL TUTORIAL DE XILOGRAFÍA DESDE CERO ;) DECÍA DEL RODILLO PARA APLICAR LA TINTA...ABRAZOS.@@ortubia_expresionismo