Nitro Engine Powered 3D Printed RC Airplane. Full Build. DIY RC Airplane.
HTML-код
- Опубликовано: 20 авг 2024
- Can the LW-PLA 3D printed designed for electric motor be used with an RC model airplane nitro engine?
The original design is a rear wheeled and electric powered model airplane.. I upgraded for nitro engine and nose wheel.
Original 3d Printer Files: www.eaglercmod...
My upgrade 3D Printer STL files: drive.google.c...
MORE DETAILS: www.rcpano.net...
180cc Fuel Tank: s.click.aliexp...
Silicone fuel tube (3x5mm): s.click.aliexp...
Micro servos: s.click.aliexp...
Radio control: s.click.aliexp... or s.click.aliexp...
Glow ignitor and charger: s.click.aliexp...
9x6 Propeller: s.click.aliexp...
OS 25FX 4CC Engine: t.ly/pZqY
ESUN PLA-LW filament: s.click.aliexp... OR s.click.aliexp... OR s.click.aliexp...
Spot welding machine: s.click.aliexp...
Nickel belt: s.click.aliexp...
Charger: s.click.aliexp...
CG: 65mm (From the wing leading edge)
Thanks for watching. If you want to support my channel, join.
/ @kendin-yap
Full Flight Video (No Edit): • Nitro Engine Powered 3...
My Web Site (KendinYap): www.rcpano.net
All of my videos : bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.
#rcairplanes
#modelairplane
#rcnitromodel 
Хобби
Well done …nitroengine is a plus in this hobby!
@@thegamereviewandreallifech1910well, the real thing would be you getting no in it and flying it
*( MASTER LAYANGAN )* IKUT NYIMAK TUTORIAL PESAWAT RC. 🙏👍👍👍👍
Amazing! Love the design engineering. I built a 3D printed Ercoupe. It was so thin and fragile. It flew okay on the maiden, but when I came in to land I was offside of the runway and hit a weed. The model crumbled. That was my first and last 3D printed airplane.
Building the old fashion balsa and plywood kits is more relaxing and rewarding...best engine ever was the OS 40 FSR...... unbeatable and last for years
from start to finish, faultless, bravo,
Thank you very much!!
Superb! Superb! Superb! Suprb! 👍👍👍👍
Very good job
Awesome.🎉
FPV on this would be sick
It might be a good idea to put foam around the tank so as to mitigate the possibility for fuel to foam up.
13:39 That plane at the back 😂
operator drink too much oil 😆
@@mattmuslim 😂😂😂
You are great
You are humble
You are Miracle
You are Made For Planes
You are My Hero❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤🎉🎉
Дуже гарний літак!
That's a neat idea, takes scratch built to another level. Im curious to see how the plastic will hold up to model engine fuel and exhaust over a period of time.
Fabulous
Cool video!! Love your work! My only two things that I saw were 1) I loathe grub screws on main control surfaces, e.g- Elevator and Ailerons. I know some people swear by them but that is just my opinion. 2) Slightly heavier bands holding the wings on. And always put more on than you think it needs.
Great video, greetings from Colombia
Hocam yine döktürmüşsünüz , printer baskı süreleri uzun olmasa cidden güzel seçenek. Hocam ileride zagi tarzı uçak yapmayı düşünüyor musunuz.
Salamun alaykum! Qardashim Uzbekistandan salamlar olsun.Tashakkurlar sana.Allah ishigni ummat foydasiga qilsin. Amin.
Nice build and maiden.
Nicely done, although it’s a little concerning to have your stab held on by a single magnet and micro servos on a nitro is unusual - then again 3d printed nitro is too…I wish you many happy landings. I love the idea of using an ultra modern technology to create something nostalgic
the stab is also held in place with a 3mm Carbon Fiber spar that runs right through the H-stab .. its done this way so it can be easily replaced in case of damage, up to now we haven't had any problems
Tertemiz işçilik, maşallah hocam emeğinize sağlık, tebrikler 👏👏👏
Excellent video! 👍
It would seem that this plane would be very nose heavy with the engine and everything at the front. What’s the Center of gravity. Great video but leaves a few of the steps out
Well done,i like it alot😀👍🛩️
Wow! Wonderful content .
But the engine will be heavy
Как Всегда Лучший👍💯
Nice Job ❤❤❤❤
Amazing
Gerçekten harika , insan denememek için kendini zor tutuyor 👏
Great video and model. I can't seem to find the link to purchase this plane. What is the name of this plane and where can I download it?
Eline sağlık üstad. Gayet başarılı. Uygun bir zamanda deneyeceğim bende :)
Good job, very nice ;-)
Elinize emeğinize sağlık.❤
Perfect construction & flying ❤❤
Inspirational video 👌👌
Bravo ellerine saglik.👏👏
La prochaine fois je te conseille d'utiliser un moteur électrique c'est moins de dépenses pour le carburant
This is not a fuel cost issue. Fuel engine models are much more fun for me to fly.
Abi 3D yazici ile airsoft yap lutfen
Superb !!!
Hello @KendinYap ! I have been watching your amazing work for the past couple of months, and I was wondering where you got all of your designs. Do you make them on your own? And if so do you use a particular software to design them.
Thanks in advance!
I use Onshape for 3D design. Some are mine, some are not. I already share the links of the designs that do not belong to me under the video. For example, the design of this model plane is not mine. But the parts needed for the fuel engine upgrade are all my own design.
Çok güzel hocam elinize sağlık
Beautiful engineering but it must weigh a lot??
Compared to the electric design, it weighs about 350g more. Flight weight for nitro engine is 1750gr. This is not bad. Reasonable weight for a fuel-engined, 130cm wing length model.
You r perfect really loved it
Oh I found the link under the "more"
Amazing 👍👍👍
Bro pls make the fighter jet video pls❤❤❤
Very nice ❤️
Superb.
Make a Arduino Uno flight controller for drones .... Please
Great great great job!!! I had been looking for a 3D printed model aircraft for a nitro engine for a long time. Is it robust enough to withstand vibration and normal use?
Thanks. . Yes, I created a reliable structure with appropriate updates for the 0.25 nitro engine.
@@Kendin-Yap In your opinion, is the 0.S. 0.15 LA engine sufficient for this model?
Nice job mate, id go for a smaller engine for that maybe a os max .15 would suite it
Thanks. I'm not sure if 15 will be enough.
Abi çok iyi bir video olmuş elinize saglık devamını bekliyoruz
Have you plans to do a bigger model with a gas engine? Maybe 20cc or bigger?
Üstad emeğine sağlık çok iyi bir çalışma olmuş yine.
Great video. Will be interesting to know how the plane holds up with glow power. What printer did you use to print the parts, especially the ASA pieces.
Prusa MK3 as shown at the 34 second mark in the viideo.
Mükemmel video. 👍
Luar biasa.... ❤
Yine çok iyi olmuş reis eline sağlık
I want to communicate with you, my teacher, may God protect you
Hocam elektrikli motor benzinliye göre daha güçlü deilmi
Evet genel anlamda doğru. Ama buradaki önemli fark güç konusu değil. Bir hobi olarak düşünüldüğünde yakıtlı motorlu modellerin keyfi çok farklıdır.
Allah sizden ve sizden olanlardan razi olsun. Cok teşekkür ederim iyi ki varsiniz. Bu ucagin ve diger projelerinizin solid cizimlerininin ham halini paylasma imkaniniz yok mu acaba ? Bu hususta yardımınıza ihtiyacim var. İstirham ediyorum.
Hi first
Imagine getting a like
Teşekkürler ✌️
buji ısıtıcısını uzun süre tuttunuzda bujinin ısınan teline zarar verebilir motor çalıştığında kısa sürede çekiniz kolay gelsin 👍 👍
Nice video you made. What is the flying weight? Give us detailed info, about servoes, motor, stabilisation...
Thanks. Below of video is the link for the details (Click "more" or "show more"). flight weight etc. There is also a link for the servos. Stabilization??? If it's about whether the plane is stable, yes it is a stable model. Typical trainer model. If you are asking if there is a gyro support.. No, the flight is completely manual. I don't use gyro assisted flight controller on airplanes.
Great work hocam. where can I find the laminated foam you have been using in your previous projects, you have never left a link for it
. I just wanna add that "I appreciate you and your work'
You can search with the definition of "Kraft Foam Board". If you are in TR, you can search by the name Fotoblok.
hocam çok iyi iş çıkarıyorsunuz elinize sağlık da free 3d stl olanlardan yapsak biraz :)
hey great plane , do u have the stl file fore the fuel tank part to hold it in /.? thanks
Güzel bir çalışma olmuş sizden ricam 3D yazıcıda parçaların birbirine geçme yani ölçü ayarı hakkında shorts çekebilir misiniz?
elinize emeğinize sağlık sizden ricamız helikopter yapabilir misiniz çok istiyoruz
Ellerine sağlık
Please make an arduino drone with multiwii sofware please
Is it possible to put Pixhawk flight controllers in old 4 and 5 channel gassers? I have some from the mid 80s hanging in the barn. Pushrod throttles. Gas engines don't have the sensitivity and quickness of electric with ESC. I want the gyros and self leveling stability we have today put into some antiques though. It was such an unforgiving hobby back then. Has anyone retro fit one?
eSUN’un LW PLA’sı mı bu? Motoru nereden temin edebiliriz?
Evet ESUN. Zaten TR de başka marka henüz yok malesef LW için. Motoru "OS 25FX" ismi ile aratın hem yerli satıcı hemde dışarıdakiler ilk sıralarda çıkıyor.
@@Kendin-Yap Teşekkürler, ilginiz için
Głogów, Polska. Pozdrawiam.
harrika
mükemmel 👏👏👏
Very nice
I really like your video
And also I am working on rc trainers aeroplane by watching your video
But it has problem , I have no electronic components like transmitter and receiver or etc.
👍👍👍
Merhabalar orijinal STL dosyalarını bahsettiğiniz linkte bulamıyorum, buna benzer bir uçak yapmam lazım. Ölçüler hakkında bilgi almak için size nasıl ulaşabilirim?
Please tell which camera and which editing software do you use?
Gopro, Canon SLR. Adobe Premier
Great job hocam i have problems printing lw pla the layers wont adhere and rip apart and the pieces are not generally strong what might be the problem?
How much total weight without fuel?
Hocam baskılarda hangi marka filamenti kullanıyorsunuz ve nozzle çapınız nedir ?
Standart nozzle (0.4). Esun kullanıyorum. Bu uçak LW-PLA dır. Zaten Esun dışında LW-PLA Türkiye satılmıyor maalesef.
@@Kendin-Yap teşekkür ederim
Cant seem to find this airplane using the link provided... is it correct or was the plane removed?
Never mind, found it. For those looking, it can be built as a low or high wing. The website shows the low wing called ELVIRA Torfu Trainer... doesn't look to be free though
yakıt deposu önde olduğu için yakıt bittikçe uçağın ağırlık merkezi arkaya doğru kaymaya başlayacak bu nedenle uçuş zorlaşacaktır
Yakıt motorlu modeller için genel uygulama bu şekildedir. Ticari seri üretim veya DIY fark etmez. Ve bu yüzden ağırlık merkezi depo boşken ayarlanır.
@@Kendin-Yap bilgilendirdiğiniz için teşekkürler
Does anyone know how this LW-PLA holds up wit temperature? I switched to PETG from PLA because the PLA warped in the sun. PETG is too heavy for most RC airplane applications. How is LW-PLA?
LW-PLA is also affected by the sun. There is no problem during the flight. But it should not be left in a fixed position under the sun for more than 10-15 minutes.
Better hope you never lean the engine out to much, it will get hot enough to melt the engine mounts, could be a very bad day....also, i couldnt trust tiny servos on a any of the nitro aircraft I have flown, they could run the throttle, but could not keep the elevator working the way I fly..And I dont think their vibration rated, they could glitch easily.. I would say you could get away with it for a few flights but a crash would soon occur
I understand your concerns. But I've been building and using Nitro powered models for about 35 years. (I share videos of simple and entry-level model airplanes on my channel). The motor bearing was printed with ASA filament. And it withstands up to 110°. Engine mounts never reach 110° . Maximum 60-80 streams. This is a small engine (.25) . It has very little vibration. And the model is also small. (wingspan 130cm). In other words, a micro servo with high quality and metal gears is sufficient. So far, I have performed about 25 sorties with this model.
Nice build but the question is how long will it hold up after the nitro from the exhaust hits the wing and fuselage? Interested he see after how many flights it will structurally fail? I used to use epoxy spray paint back in the day for nitro projects on silk skins but not sure how that solvent would play with PLA, LW-PLA or PETG.
I ran tests on a part (Painted LW-PLA) before making the model. For approximately 2 weeks. No problem occurred. But will there be a problem for much longer periods of time? I do not know.
@@Kendin-Yap I would think it would be ok as long as the exhaust oils are cleaned up after each flight. I have a balsa airframe with monocote heat shrink covering that is much thinner and have had no problems with the exhaust spray. I clean up the oils after each flight and it has lasted years. It is a Piper J-3 cub. Would love to have a 3D rc though. Just like that one. Maybe a biplane. Biplanes are pretty cool and can pull off amazing maneuvers.
Also add rubber bend off Exhaust too ,to divert direction away from fusalage
@@homienat3374 He had a deflector on there already.............??
@@Mgp-Rc what??????
Der Flieger gefällt mir, würde ich auch gern bauen. Würdest du mir die Druckdateien senden?
The link is below the video.
ما هو إسم المحرك
一看就知道 飛個兩次就解體了
You're wrong
Whats 3d printer using?
Prusa Mk3S+
Helpppppppp😭😭😭😭😭😭😭😭😭 I followed your whole video about making the arduino transmitter and receiver that you posted in 2020 and did everything really nicely as you showed and now finally I finished this whole thing and now when I tested, the brushless motor is just keep on beeping and the servo motors are also not working anymore(they first worked when I plugged them first time). I did soooooooo much hardwork on this with everything I had please help me you are professional in this, I’m a noob and a beginner, what should I do and what can be my mistake in this?😢😢😢😢🥺🥺
Aileron, elevator ve rudderların boyutunu nasıl hesaplıyorsunuz?
Bir formül kullanmıyorum. Yıllar içerisindeki tecrübelerim ile karar veriyorum.
For how long can it fly with a full tank?
It depends on the conditions, but it is possible to fly for about 15-20 minutes.
When will next video come
👉👉
What 3d printing material did you use? And also how did it manage with the heat of the engine?
I'm planning on making a RC car powered with a gasoline 4 stroke engine, and I'm kind of hesitant of making a 3D printed body for it as I'm afraid it will severly warp due to the heat of the engine.
The motor bearing, which directly contacts the motor, is ASA filament. (Heat resistance approximately 100-110°C). Other parts are LW-PLA. For the car, ABS or ASA can be used in the engine part and PLA and PETG can be used in other parts.
@@Kendin-Yap Thank you for the fast reply!
I'll most likely wont have any parts directly contacting the motor that are 3D printed :)
🤩🤩🤩🤩😍