Get Started with ESP32: Lesson 05 - LVGL Demo Test
HTML-код
- Опубликовано: 12 май 2024
- This video is a dedicated ESP32 course for beginners, utilizing the Elecrow CrowPanel ESP32 Display board, guiding you from setting up your ESP32 development environment to completing all the exciting projects on the Arduino IDE.
⭐ Get Elecrow CrowPanel ESP32 HMI Display Series here 👇
www.elecrow.com/display/esp-h...
⭐ Course File 👇
github.com/Elecrow-RD/CrowPan...
For any technical inquiries or assistance, please feel free to reach out to us at techsupport@elecrow.com. We are here to help and will respond to your request promptly.
📌Let's subscribe and follow us to keep updated with the latest news and perks:
Facebook: / elecrow.openhardware
Twitter: / elecrow1
Instagram: / elecrow_official
Linkedin: / elecrow-limited
Tiktok: / elecrow
#CrowPanel #ESP32 #Elecrow - Наука
could I apply those to esp32_2432s022C (CYD)module which size is 2.2 inches and resolution (240 * 320) ? , the core chip is esp-wroom-32
Yes, you can, but you need to check if the TFT_eSPI library supports your board's display and touch drivers first!
hello I have a 2.8 inch the image is there however I cannot use the touchscreen thank you for your response
Make sure that the touch pin configuration in the user setup.h file is correct, you can watch the second lesson to learn how to configure it. Another possibility is that you did not set lv_tick_custom to one in the lv_conf.h file.
I have downloaded the course content and tried to run the code. It actually getting error in lv_demo_widget, saying "'lv_demo_widgets' was not declared in this scope
". But I have included
"#include
#include "
Can you please help
You will find the answer in the 6:00-6:28 of this video😊
Have followed downloads and instructions carefully. Compilation is succesful and then I just get a black screen..... In the serial monitor the touch screen shows the co-ordinates but nothing on the display
Hi, please learn the content of the first episode and configure the compilation information according to the different boards before compiling.😊
I installed it without any problems, but my screen did not appear?
Hi, for any technical inquiries or assistance, please feel free to reach out to us at techsupport@elecrow.com. We are here to help and will respond to your request promptly.
now I am getting this error ):
c:\users\admin\documents\arduino\libraries\lvgl\src\lv_conf_internal.h:41:18: fatal error: ../../lv_conf.h: No such file or directory
41 | #include "../../lv_conf.h" /*Else assume lv_conf.h is next to the lvgl folder*/
| ^~~~~~~~~~~~~~~~
compilation terminated.
exit status 1
Compilation error: exit status 1
Hi, regarding your problem, please pay attention to 4:19 to 4:55 of the video 😊
I already did that part
@@SnowyZoomsAnimations Hi, for any technical inquiries or assistance, please feel free to reach out to us at techsupport@elecrow.com. We are here to help and will respond to your request promptly.😊
hi, i have the same Error, what´s the Solution?
@@fabian769 Hi, for any technical inquiries or assistance, please feel free to reach out to us at techsupport@elecrow.com. We are here to help and will respond to your request promptly. 😊
Make in hindi.
learn english
Wish it actually worked the way you show in the video. Easily had 40+ errors after following your instructions to the T. Zero idea what to do. A basic explanation of everything would be better than this. We don't need steps, we need to understand what those steps are, so when your instructions don't work(and they won't), we can actually have a fighting chance of correcting the issue. Gone through most of your videos about these displays and not a single one have I had success with.
Hi, we are very sorry for any inconvenience caused to you. If you encounter any difficulties while using our product, please don't hesitate to reach out to our technical support team via techsupport@elecrow.com. We're here to assist you.