For more projects - youtube.com/@ThatProject That Project Github Repository - github.com/0015/ThatProject Join FB Group - facebook.com/groups/138965931539175
Thanks for posting that tutorial👍🏻Should maybe ease up some on that compressor effect in audio. Some dynamics are nice. Commercials are only about 30 seconds long at most usually, and 30 minute tv shows have some DYNAMICS in the audio. 👍🏻
If you can do a quick tutorial how to read data from analogique and add timer or counter down with LVGL squareline software that will be very very helpful 🙏
Interesting project, but it's a bit too complicated to follow once you ported the code over to the ESP32. Maybe a simpler project with more emphasis on porting the code and explaining all the functions and classes... Thanks..
What an awesome video! Super helpful! Thank you so much for putting in the time. I'm using this little board as a custom wall mounted robotic arm controller, and I've got it just about working! Quick question for you, where in the world did you find the pinout for the available GPIO pins and other breakout pins? I've looked everywhere! Any chance you could post a link?
Hey Matt, Thank you for your support. Are you looking for a datasheet of WT32-SC01 Plus? This is the only document they have released. (Chinese) doc.smartpanle.cn/_static/espboard/ESP32S3/ZX3D50CE02S-USRC-4832/ZX3D50CE02S-USRC-4832.pdf
Congratulations, you are the only source of information regarding the programming of this display. One piece of advice: I have a WT32-SC01 (V3.3), what should I change in the .ino file?
Hello, thank you for your video. I have a question. you have placed two labels on top of each other at mph. if I e.g. If you leave the display at 000 mph and 111 mph, then the numbers will no longer fit on top of each other. How can I correct this? The width of 1 and 0 is different. Thank you very much.
I don't get your situation. ruclips.net/video/b_4m1A3A2yw/видео.htmlsi=xKg3yJrMV4k7Xnhz&t=880 As you can see in my video, I duplicated the 000 label to create the same label. In this case, because all properties are the same, a 100% identical label is added and thus overlaps the existing label. width, height 1 content is automatically sized according to the length of the content. Therefore, if you use the same font, it will be the same size.
You can use the UI code from Square Line studio on both Arduino IDE and ESP-IDF. Just make sure other components like GPS should be rewritten for ESP-IDF.
I was wondering where from did you get those gui asset file? Did you design those for yourself or from online resources? Can you link down some resources?
@@ThatProject can i ask which tools did you use? Is there any place to download premade gauge with all of their components, like background and foreground. I am working on my own GUI for Indoor Air quality monitor and your videos are helping lot. Keep up the good work. Thanks
@@muhammadshahzaib3813 I just created the necessary graphic assets using photoshop. I think googling is the best way to find the images you need. Thank you.
Hi, thank you very much for the content, I'm having a issue with my st7796 touchscreen, the Y coordinates seems to be swaped, for example, if I do have two buttons, one in the top left and botton lef, when I touch the screen the oposite button that activates , it Seems that the Y min and max is swapped.
Would be very interesting if you could post a vídeo with more details with the way that the data is send to the UI, for example how to read an value and show in the screen, for begginers.
While trying to compile SC01Plus_BN880Q_GPS_App_Part2, I keep getting Compilation error: conflicting type qualifiers for 'ui_font_Display24' line 621 of the corresponding sketch, and for the rest of the font sizes (16, 40, 90) also
It seems to be an error about the font. Are you using the Arduino IDE like in my video? Please check again about the Display Font 16, 24, 40, 90 I used.
Would a project made with SquareLine be Opensource? Assuming i want to sell an opensource machine programmed with Arduino IDE, where users can edit the code and possibly the GUI as well. Can they do so without the use of the software?
I'm not sure about the sales part. The code exported from Squareline Studio versions so far is a 100% readable version. Therefore, modifications and additions can be made at the code level without Squareline Studio. But I think this could become impossible at any time depending on their policy. Anyway, I think that projects based on the results of Squareline studio can be opensource projects. (until now)
@@ThatProject So there is nothing in the code actually tying it back to them, nothing obfuscated or using libraries that they own? Interesting. im looking to make an opensource project with advanced GUI but every single options i used in the past like Nextion displays were not opensource and defeats the purpose of the project
Hello, Eric. Thanks for your tutorial.i download your full code.but I have compile error ( " LV_COLOR DEPTH SHOULD BE 16-BIT TO MATCH SCOTLAND STUDIOS").Can you please help me fix it ?
If you see my tutorial video in detail, you'll know I set the Color Depth to 16-bit. ruclips.net/video/b_4m1A3A2yw/видео.html so, your LVGL configuration should also be set to the same 16-bit color depth.
@@ThatProject hello Eric , thanks for your quick response.actully I downloaded your project from GitHub.so do I have it open it in square line and make it 16 bit colour?
@@annoorkhan4219 Well, you don't have to because it's already under 16-bit color depth. All my code is using 16-bit color depth. Check your LVGL config.
That's true. Several attempts were made to increase FPS, but no significant improvement was achieved. How about looking forward to Slint? ruclips.net/video/zwZkcsAiNk0/видео.htmlsi=1VQGXN2lCLDcxkTt
It depends on how you use it. You can definitely create a great UI with ease. Why don't you try it with the free version first, unless it's for commercial use?
@@ThatProject We are running a UPS Monitoring and Management system which takes the input from a custom design STM board and then uses RPI as a computer. Any recommendation for other tools?
@@thekashifkhan Mainly RPI-based works in Python or C++, so wouldn't it be better to use a GUI tool like Qt or tkinter? It is also possible to create web-based GUIs if it works as a server.
Hi; ui.c: In function 'ui_Screen1_screen_init': ui.c:88:52: error: 'ui_font_Display24pt' undeclared (first use in this function) ui.c:88:52: note: each undeclared identifier is reported only once for each function it appears in exit status 1 Compilation error: 'ui_font_Display24pt' undeclared (first use in this function) I encountered such an error. I changed the values to 1 for font usage from lv_conf.h, unfortunately it didn't work. #define LV_FONT_MONTSERRAT_24 1 Then I tried adding the font in your example via assets. It gave the same error. I really appreciate you. Thank you for helping me develop my electronics hobby. I will be glad if you help me.
You don't have to enable "LV_FONT_MONTSERRAT_24" because I don't use it. Please check there is the file ui_font_Display24pt in your project folder. Everything works fine.
@@ThatProject I tried what you said. I may not have expressed it correctly :) " In function 'ui_Screen1_screen_init': error: 'ui_font_Display24pt' undeclared (first use in this function) note: each undeclared identifier is reported only once for each function it appears in " The error points to the following line. " lv_obj_set_style_text_font(ui_Screen1_Label4, &ui_font_Display24pt, LV_PART_MAIN | LV_STATE_DEFAULT); " It gives an error in this part of the code. Help me :)
It was a good video until you started woeking on the code. Copy and pasting is awful, it would have been better to make another part and type the code if you think it will take more than a few minute. If you are copying and pasting might as well just now show them in the code video at all and just show the final code.
![Let's build a GPS Speedometer with ESP32-S3 and BN-880Q(GPS, Compass) [1/2]](http://i.ytimg.com/vi/J0AYSS8xxOY/mqdefault.jpg)
![Let's build a GPS Speedometer with ESP32-S3 and BN-880Q(GPS, Compass) [1/2]](/img/tr.png)
![LVGL 9, [Ep. 01], From Scratch to Benchmark, For newbie/beginner/starter #LVGL #UI #ESP32 #Benchmark](http://i.ytimg.com/vi/s4_fUwhw-dI/mqdefault.jpg)
For more projects - youtube.com/@ThatProject
That Project Github Repository - github.com/0015/ThatProject
Join FB Group - facebook.com/groups/138965931539175
Thanks for posting that tutorial👍🏻Should maybe ease up some on that compressor effect in audio. Some dynamics are nice. Commercials are only about 30 seconds long at most usually, and 30 minute tv shows have some DYNAMICS in the audio. 👍🏻
Always appreciate your LVGL tutorials. There is not much over the RUclips on this topic. Thanks for uploading.
Amazing tutorial! I hope we will see similar high quality videos in the future too. :)
Congratulations on the video, I loved the content and used it as a reference to do my own project here.
Great video but got a bit rushed at the end when bringing the code across to the IDE and changing the code to actually make it work.
Love the OC map background! Thanks for this video.. helped me a lot on my latest project
Thanks for uploading such a good LVGL tutorial post
Thank you so much for this instruction. It really helped me out to get my project working.
I'm happy to hear that.
Thank you for this!! Amazing stuff. I accidentally order the SC01 without know the Plus was available 😂
For the love of God, how did your Arduino compilation go so quickly? Was this video edited? Or is there some technique?
haha. It's just an edited video. It's sloooooow.
If you can do a quick tutorial how to read data from analogique and add timer or counter down with LVGL squareline software that will be very very helpful 🙏
Interesting project, but it's a bit too complicated to follow once you ported the code over to the ESP32. Maybe a simpler project with more emphasis on porting the code and explaining all the functions and classes... Thanks..
I agree with you. This first focused on GUI creation with SquareLine Studio. I think the code part of LVGL needs to be dealt with in more detail.
That is so cool
Really cool
What an awesome video! Super helpful! Thank you so much for putting in the time. I'm using this little board as a custom wall mounted robotic arm controller, and I've got it just about working! Quick question for you, where in the world did you find the pinout for the available GPIO pins and other breakout pins? I've looked everywhere! Any chance you could post a link?
Hey Matt, Thank you for your support.
Are you looking for a datasheet of WT32-SC01 Plus?
This is the only document they have released. (Chinese)
doc.smartpanle.cn/_static/espboard/ESP32S3/ZX3D50CE02S-USRC-4832/ZX3D50CE02S-USRC-4832.pdf
Hello Matt, there is an EN version there :
www.wireless-tag.com/wp-content/uploads/2022/11/WT32-SC01-Plus-V1.3-EN.pdf
Congratulations,
you are the only source of information regarding the programming of this display.
One piece of advice: I have a WT32-SC01 (V3.3), what should I change in the .ino file?
I have read your email and have sent you the graphic part of WT32-SC01.
Hello, thank you for your video. I have a question. you have placed two labels on top of each other at mph. if I e.g. If you leave the display at 000 mph and 111 mph, then the numbers will no longer fit on top of each other. How can I correct this? The width of 1 and 0 is different. Thank you very much.
I don't get your situation.
ruclips.net/video/b_4m1A3A2yw/видео.htmlsi=xKg3yJrMV4k7Xnhz&t=880
As you can see in my video, I duplicated the 000 label to create the same label. In this case, because all properties are the same, a 100% identical label is added and thus overlaps the existing label. width, height 1 content is automatically sized according to the length of the content. Therefore, if you use the same font, it will be the same size.
Very helpful video! Thank you.
Axcellent
nice tutorial
Excellent demo!! Thank you. Would you consider also showing building and running this on the esp-idf?
You can use the UI code from Square Line studio on both Arduino IDE and ESP-IDF. Just make sure other components like GPS should be rewritten for ESP-IDF.
I was wondering where from did you get those gui asset file? Did you design those for yourself or from online resources? Can you link down some resources?
I made it by my self and you can download it from my project Github.
@@ThatProject can i ask which tools did you use?
Is there any place to download premade gauge with all of their components, like background and foreground.
I am working on my own GUI for Indoor Air quality monitor and your videos are helping lot. Keep up the good work.
Thanks
@@muhammadshahzaib3813 I just created the necessary graphic assets using photoshop. I think googling is the best way to find the images you need. Thank you.
Valeu!
Excellent
Hi, thank you very much for the content, I'm having a issue with my st7796 touchscreen, the Y coordinates seems to be swaped, for example, if I do have two buttons, one in the top left and botton lef, when I touch the screen the oposite button that activates , it Seems that the Y min and max is swapped.
Try this way,
data->point.x = y;
data->point.y = tft.height() - x;
@@ThatProject thank you very much, I was able to invert in the touch config files!
Thank you!
Would be very interesting if you could post a vídeo with more details with the way that the data is send to the UI, for example how to read an value and show in the screen, for begginers.
Very nice video,THX.
is there a way to have smoother animations?
Faster display communication is needed. Perhaps the new ESP32-P4 will show much better animations.
While trying to compile SC01Plus_BN880Q_GPS_App_Part2, I keep getting Compilation error: conflicting type qualifiers for 'ui_font_Display24' line 621 of the corresponding sketch, and for the rest of the font sizes (16, 40, 90) also
It seems to be an error about the font. Are you using the Arduino IDE like in my video? Please check again about the Display Font 16, 24, 40, 90 I used.
I'm using Arduino IDE 2.0.2
I'm trying to run the progam referred on Github
@@MrOsola It's really weird. If you are using LVGL 8.3.3 I think you can use my code without problems.
Would a project made with SquareLine be Opensource? Assuming i want to sell an opensource machine programmed with Arduino IDE, where users can edit the code and possibly the GUI as well. Can they do so without the use of the software?
I'm not sure about the sales part. The code exported from Squareline Studio versions so far is a 100% readable version. Therefore, modifications and additions can be made at the code level without Squareline Studio. But I think this could become impossible at any time depending on their policy. Anyway, I think that projects based on the results of Squareline studio can be opensource projects. (until now)
@@ThatProject So there is nothing in the code actually tying it back to them, nothing obfuscated or using libraries that they own? Interesting. im looking to make an opensource project with advanced GUI but every single options i used in the past like Nextion displays were not opensource and defeats the purpose of the project
@@UnknownDiver How about discussing this again on the LVGL forum? I think this will be of great help not only to me but also to others. forum.lvgl.io/
Hello, Eric. Thanks for your tutorial.i download your full code.but I have compile error ( " LV_COLOR DEPTH SHOULD BE 16-BIT TO MATCH SCOTLAND STUDIOS").Can you please help me fix it ?
If you see my tutorial video in detail, you'll know I set the Color Depth to 16-bit. ruclips.net/video/b_4m1A3A2yw/видео.html so, your LVGL configuration should also be set to the same 16-bit color depth.
@@ThatProject hello Eric , thanks for your quick response.actully I downloaded your project from GitHub.so do I have it open it in square line and make it 16 bit colour?
@@annoorkhan4219 Well, you don't have to because it's already under 16-bit color depth. All my code is using 16-bit color depth. Check your LVGL config.
@@ThatProject can you please specify what I have to change in config?
@@annoorkhan4219 Just check the lvgl/src/lv_conf.h if you're working on Arduino IDE.
I saw fps is slow up to 10
It feels that ESP32 just not a good fit to create apps with smooth animations
That's true. Several attempts were made to increase FPS, but no significant improvement was achieved. How about looking forward to Slint? ruclips.net/video/zwZkcsAiNk0/видео.htmlsi=1VQGXN2lCLDcxkTt
how to you create new font text ? help me please
ruclips.net/video/b_4m1A3A2yw/видео.htmlsi=WM-kl7-4DQVjSFiw&t=383 Have you checked this part?
worth paying for squareline studio?
It depends on how you use it. You can definitely create a great UI with ease. Why don't you try it with the free version first, unless it's for commercial use?
Is this possible with a rasberrypi as well?
As far as I know, LVGL can be used on RPI, but there are many more graphics tools available. What project are you going to do with this?
@@ThatProject We are running a UPS Monitoring and Management system which takes the input from a custom design STM board and then uses RPI as a computer. Any recommendation for other tools?
@@thekashifkhan Mainly RPI-based works in Python or C++, so wouldn't it be better to use a GUI tool like Qt or tkinter? It is also possible to create web-based GUIs if it works as a server.
Hi;
ui.c: In function 'ui_Screen1_screen_init':
ui.c:88:52: error: 'ui_font_Display24pt' undeclared (first use in this function)
ui.c:88:52: note: each undeclared identifier is reported only once for each function it appears in
exit status 1
Compilation error: 'ui_font_Display24pt' undeclared (first use in this function)
I encountered such an error. I changed the values to 1 for font usage from lv_conf.h, unfortunately it didn't work.
#define LV_FONT_MONTSERRAT_24 1
Then I tried adding the font in your example via assets. It gave the same error.
I really appreciate you. Thank you for helping me develop my electronics hobby.
I will be glad if you help me.
You don't have to enable "LV_FONT_MONTSERRAT_24" because I don't use it. Please check there is the file ui_font_Display24pt in your project folder. Everything works fine.
@@ThatProject
I tried what you said.
I may not have expressed it correctly :)
"
In function 'ui_Screen1_screen_init':
error: 'ui_font_Display24pt' undeclared (first use in this function)
note: each undeclared identifier is reported only once for each function it appears in
"
The error points to the following line.
"
lv_obj_set_style_text_font(ui_Screen1_Label4, &ui_font_Display24pt, LV_PART_MAIN | LV_STATE_DEFAULT);
"
It gives an error in this part of the code.
Help me :)
How to change button state in arduino ide?
Your video is very good and useful, thanks for your interest?
button state in Arduino IDE? is this for LVGL button or a real hardware button?
@@ThatProject i want when real hardware button is pressed, the button in lvgl is also updated according to that button
-thank you for replying me 🥰🥰
wow
There is no simple external keystroke tutorial
Relevance to this project???
It was a good video until you started woeking on the code. Copy and pasting is awful, it would have been better to make another part and type the code if you think it will take more than a few minute. If you are copying and pasting might as well just now show them in the code video at all and just show the final code.