I have been using interchangeable buildings on my small layout for years now as it helps keep me motivated. I can quickly change from a 1960's Sussex based layout to one set in Cornwall in the1980s. I can also change it into a preserved line....all without building a new baseboard and buying loads more track....brilliant,...... Regards Keith
What a Nice Little Shunting Yard, and the BR class 25 looks great too. I will continue to wait till you return to the OO9 scale track in The Loft layout.
Your precision is impeccable, along with your planning; building a layout has always been an ambition of mine and the creation of this series is greatly appreciated.
Nice start. Maybe next time drill and screw one end then same at other end. That way, the pilot holes are in the right place. Kudos to you, though, you are actually doing it and helping others to follow suit.
When I worked for British rail back in the 80s at Brighton we had a loco usually a class 73 deliver one or 2 TTA oil tank wagons to deliver deisel fuel to the mpd , so you could have this plus stores wagons too , but looks a good small layout and lots of fun can be had with this.
Sounds great to me Triss. I'd have the top siding on the right as off scene, then you can swap stuff, and if you do have it as an exhibition layout you can do it without public view.
Hi Tris a years or so ago I started a inglenook shunting layout, I left the feeder line open no buffers so I could add the old Peco SL-43 as a add on fiddle yard! some how the one or two diesels & one or two steam have grown I now have serveral Barclays, Pecketts, R&H, Sentinals & a not the greatest runner YEC shunters to my fleet, plus old style vacuum braked wagons to modern air braked, this was ment to be a cheap outout 🤔😊🤣
Hi Tris, If you move your points closer together, you'll have longer sidings and, as someone else has pointed out, a runround will add greatly to the playability.
So pleased I found your channel - just what I’d like to replicate. Great design. Possibly a run-around loop as has been suggested. Shall follow with much interest. Thanks for sharing. Happy New Year.
Have you looked at wire in tube for point control to keep cost down. If you use a SPDT switch to control the rod, that can power your frog. Happy to discuss further or do a video call to show you mine.
As you were talking I thought about @darksidescenics IKEA board approach, using one of their wall shelfs, means easy to hang up and get down.. and it you make it so it attached to other layouts that would be decent. 🎉
Hi. I concur about adding a runaround, but also why not on one side have the track exit the module to a cassette for a loco and a few wagons. You could then have several of those to store several compositions ready to run on your 'timesaver' or Inglenook type layout. Cheers from Belgium.
Hi Tris, have just started watching this series and intend to create a similar layout in my shed. One question, what thickness of plyboard did you use? Cheers
The board may not be flat because you screwed the frame to the plywood, rather than making a square frame first and then fitting the top to that frame.
Probably more the fault of the stripwood. I have spent many (un)happy hours sorting through the offering at Wickes, B&Q etc trying to find a straight piece. Was actually challenged once for taking so much off the rack!
Wickes is better than B&Q for timber, you can open as many packs as you like there to find the best options, and making a frame of 69x19mm timber should prevent any warping.@@mikeryan959
Tris, if you include a runaround loop, for a wagon, you will increase the playability by a massive amount.
I was about to comment that Tris should check out Dibs Yard for track plan inspiration as the wagon run round loop makes all the difference! 👍🏻
@@Weldinggoggles ahh, thank you man. He should only look for the run around loop. The rest of my plan is totally bogus! 😂
I have been using interchangeable buildings on my small layout for years now as it helps keep me motivated. I can quickly change from a 1960's Sussex based layout to one set in Cornwall in the1980s. I can also change it into a preserved line....all without building a new baseboard and buying loads more track....brilliant,...... Regards Keith
Nice video Tris. Looking forward to seeing how this project comes together. - Nicholas.
Hi Tris , what a great idea to build a fun mini layout. Love it .
What a Nice Little Shunting Yard, and the BR class 25 looks great too.
I will continue to wait till you return to the OO9 scale track in The Loft layout.
Your precision is impeccable, along with your planning; building a layout has always been an ambition of mine and the creation of this series is greatly appreciated.
Nice start. Maybe next time drill and screw one end then same at other end. That way, the pilot holes are in the right place. Kudos to you, though, you are actually doing it and helping others to follow suit.
When I worked for British rail back in the 80s at Brighton we had a loco usually a class 73 deliver one or 2 TTA oil tank wagons to deliver deisel fuel to the mpd , so you could have this plus stores wagons too , but looks a good small layout and lots of fun can be had with this.
Sounds great to me Triss.
I'd have the top siding on the right as off scene, then you can swap stuff, and if you do have it as an exhibition layout you can do it without public view.
Good video. Nice, organized work area. Other than the metric system, it was easy to follow ;)
Thanks for sharing.
Hi Tris a years or so ago I started a inglenook shunting layout, I left the feeder line open no buffers so I could add the old Peco SL-43 as a add on fiddle yard! some how the one or two diesels & one or two steam have grown I now have serveral Barclays, Pecketts, R&H, Sentinals & a not the greatest runner YEC shunters to my fleet, plus old style vacuum braked wagons to modern air braked, this was ment to be a cheap outout 🤔😊🤣
Hi Tris, If you move your points closer together, you'll have longer sidings and, as someone else has pointed out, a runround will add greatly to the playability.
So pleased I found your channel - just what I’d like to replicate. Great design. Possibly a run-around loop as has been suggested. Shall follow with much interest. Thanks for sharing. Happy New Year.
Watch this space ! Good video . Dummy run for 0 gauge coming next ? Looking forward to next instalment.
Have you looked at wire in tube for point control to keep cost down. If you use a SPDT switch to control the rod, that can power your frog.
Happy to discuss further or do a video call to show you mine.
Looks good, I am in the planning stage as well with the same idea using TT120. You have a great channel enjoying all your projects.
As you were talking I thought about @darksidescenics IKEA board approach, using one of their wall shelfs, means easy to hang up and get down.. and it you make it so it attached to other layouts that would be decent. 🎉
I always have 3 layout builds on the go, it's a great way to keep the interest high, if one's not doing it for you, just swap to another.
Hi. I concur about adding a runaround, but also why not on one side have the track exit the module to a cassette for a loco and a few wagons. You could then have several of those to store several compositions ready to run on your 'timesaver' or Inglenook type layout. Cheers from Belgium.
Hi Tris, great video again. Am thinking about doing something similar as unable to build large layout at the moment. Keep up the good work 👍
Great video handsome 😉❤
Looking forward to this. Run around loop?
Thanks 😊
Hi Tris, have just started watching this series and intend to create a similar layout in my shed. One question, what thickness of plyboard did you use? Cheers
Yes! A 00 Neal shunting layout? - yes please
good vid on channel thanks lee
I would have considered N gauge or TT120, you'd have so much more space and scene to play with!
What points do you use? I have Hornby and notice some of my trains derail on them, thanks
Will it be DC or DCC?
Why not build it similar to an inglenook shunting layout, maybe it your own spin on it
The board may not be flat because you screwed the frame to the plywood, rather than making a square frame first and then fitting the top to that frame.
Probably more the fault of the stripwood. I have spent many (un)happy hours sorting through the offering at Wickes, B&Q etc trying to find a straight piece. Was actually challenged once for taking so much off the rack!
Wickes is better than B&Q for timber, you can open as many packs as you like there to find the best options, and making a frame of 69x19mm timber should prevent any warping.@@mikeryan959
Needs a run-round loop