In case you need further hydrogen Simulink models (ready to run) (i.e. a complete hydrogen storage station, PEM components, Fuel Cells, Electrolyzers etc.) feel free to reach our channel out!
Thank you for the video, i would like to ask you how can i simulate an air-magnesium fuel cell and then how to make a suitable block which can be accepted by ETAP in order to simulate the whole gride powered by this kind of fuel cell.
hi sir,according to your fuel cell block parameters,the temperature is 65.why have you used 95 in the FuelFr equation ? furthermore,N=65 and imassuming from your equation you used N=400 ?
Hi, If I want to see ope circuit characteristicsof Fuel Cell, I mean no load, it is not working. How can I see voltage current characteristics of the Fuel cell by itself without any load?
Напишите подробно, какие компоненты вы использовали в формуле? Хочу понять откуда взялись эти числа! Модель без полного объяснения не модель. Т.е я могу поставить туда любое число?
Thank you for your lecture, it is very useful, however I have a question. i want to know 60000*8.3145*(temperature)*400*u(1)~~~~~~mean. i think it is a theory about fuel cell. but I'm about to study fuel cell. so I don't know. if you do not mind could you tell me that equation mean?? If it's hard to tell, could you tell me what the theory is? i know the structure about fuel cell.
Hi, Thank you for your comment. If you want to keep the same voltage, you should connect in series... in case want to increase the voltage, you should connect in series
Hi, I am trying to find those SOFC functions in my R2020b version too but unfortunately, I can't find them either. By any chance you have found them? If yes, could you please advise me on how to do it? Thank you very much :D
Thank you for the video .please can you explain me the expression of the 2 functions f(u) used in this simulation ? or give me a link that can show me the explain of this expression so i will read and understand the expression of f(u) thank you.
Good day, thank you for your comment. The f(u) is the matlab function. The value inside if the Atomic mass of hydrogen 1 and hydrogen 2. You can goodie it and get papers which will help u
@@pzengineering2020 Which source that you used as paper, I really do not understant what you have done ın the functıon part. What is this equation how can we find the same equation?
Hi thank you for your comment, We do not really have a specific paper. since we just developed it. however, you should find something similar in the journal websites.
Hi Thank you for your comment, the total generated power in this model is approximately 310W, which is influenced by the input. The use of 15 ohm as load, there was nothing special on that. You can choose any load value
@@SandeepKumar-cu8xp We were just showing how to model. In order to increase the output power you need to add Fuel Cell stacks in series or parallel. When you open the fuel cell stack, there are option on type of stack, you need to check on that
you used bus selector but didn't show how you created the bus and what components you used to create the bus along with the input values. if anyone know plz let me know i'm in the middle of my assignment.😢
I'm so glad to became an good programmer in fuel cell
That's great
Can you please help me in these video at 6:55 the function is generated can I know how to get the function
In case you need further hydrogen Simulink models (ready to run)
(i.e. a complete hydrogen storage station, PEM components, Fuel Cells, Electrolyzers etc.)
feel free to reach our channel out!
Hello, thank you for your comment. How can we work together and what are the conditions? Please email me at engineeringsolution800@gmail.com
Sent you an email @Hydrogen Simulink Models, thanks in advance
Thank you for the video, i would like to ask you how can i simulate an air-magnesium fuel cell and then how to make a suitable block which can be accepted by ETAP in order to simulate the whole gride powered by this kind of fuel cell.
Whwre to get the usin() ??
How to find fnc 1 in my library that you used at 6:58 in video
What should i search in library search for that please tell me sir
double click on your workspace and then type in fcn
hi sir,according to your fuel cell block parameters,the temperature is 65.why have you used 95 in the FuelFr equation ?
furthermore,N=65 and imassuming from your equation you used N=400 ?
I am modeling a FC plant for my thesis,please could you assist me with this query
Thank you for the video.
هل يمكن مساعدة
Hi, If I want to see ope circuit characteristicsof Fuel Cell, I mean no load, it is not working. How can I see voltage current characteristics of the Fuel cell by itself without any load?
Thank you for the video, It is very helpful
Thank you for your comment, I are happy to help you
Thank you for your effort. Where can i find usin?
Hello, thank you for your comment, we did not get your comment
Напишите подробно, какие компоненты вы использовали в формуле? Хочу понять откуда взялись эти числа! Модель без полного объяснения не модель. Т.е я могу поставить туда любое число?
Thank you for your lecture, it is very useful, however I have a question. i want to know 60000*8.3145*(temperature)*400*u(1)~~~~~~mean.
i think it is a theory about fuel cell. but I'm about to study fuel cell. so I don't know. if you do not mind could you tell me that equation mean??
If it's hard to tell, could you tell me what the theory is? i know the structure about fuel cell.
Hi tank you for your comment, the value is the Atomic mass of hydrogen 1 and hydrogen 2. You can do research on that
Hi sir,
How did you determine the H2 and O2 input flow rates? What is the source of the equation you entered?
That's my question too
Hello.
I need to connect two PEMFC in series to obtain 10 kw of power.
How to do that?
Hi, Thank you for your comment. If you want to keep the same voltage, you should connect in series... in case want to increase the voltage, you should connect in series
Dear Sir, Your video is clear and understandable. Can I know from where can I download the Fuel cell stack file?
Hello thank you for your comment, you can get the full stack file from library browser
Hi Angala you can visit our channel and send a mail for further Hydrogen stuff and models to combine!
did you get it ? i need it please!
@@belmecherimohammed2643 Hey, you can contact us too. Drop a mail.
@@belmecherimohammed2643 It is available in Simulink library browser
What is the equation used for the matlab functions after the MAX bluck??
Hello sir , thank you for your video, however i didn’t find matlab function on my library! Also can you please explain the use of those function !
Hi, I am trying to find those SOFC functions in my R2020b version too but unfortunately, I can't find them either. By any chance you have found them? If yes, could you please advise me on how to do it? Thank you very much :D
may i know which version of matlab are you using
Hi, thank you for your comment, we are using Matlab 2021b version
How did we get the equation , is this nernst equation?
What are those value
Please helppp
Are you sue there is a fuel cell option within Simulink Library?
Hi thank you for your comment, If I got your message clearly, Yes there is fuel cell stack in library browser
Thank you for the video .please can you explain me the expression of the 2 functions f(u) used in this simulation ? or give me a link that can show me the explain of this expression so i will read and understand the expression of f(u) thank you.
Good day, thank you for your comment. The f(u) is the matlab function. The value inside if the Atomic mass of hydrogen 1 and hydrogen 2. You can goodie it and get papers which will help u
i didn't understand where is the function
Exactly even I'm wondering. How to get those function blocks
@@pzengineering2020 Which source that you used as paper, I really do not understant what you have done ın the functıon part. What is this equation how can we find the same equation?
Sir can we get base paper of this model?..sir please reply it's urgent.
Hi thank you for your comment, We do not really have a specific paper. since we just developed it. however, you should find something similar in the journal websites.
hello what is 0.919 in 1st function &0.5057 in the 2nd function
At 6:55 how do you get functions.
Same have u find solutions
@@arshidap8172 ❤️ok
video is good and very informative. however what is the reference of this equation use in the model plz share me reference
Waiting for ur positive reply
how many voltage generated & power also..can u explain & why load resistance u choose 15....
Hi Thank you for your comment, the total generated power in this model is approximately 310W, which is influenced by the input. The use of 15 ohm as load, there was nothing special on that. You can choose any load value
@@pzengineering2020 but we have used 6kw-45dc fuel cell but only generated 310w only why, what to do to increase the generated power.
how to generate 1kw power..
@@SandeepKumar-cu8xp We were just showing how to model. In order to increase the output power you need to add Fuel Cell stacks in series or parallel. When you open the fuel cell stack, there are option on type of stack, you need to check on that
@@SandeepKumar-cu8xp You connect in parallel the fuel cell stacks
What's the goto value in the block
Disculpa no tienes el simulink de una celda combustible alcalina ??
I'm using matlab R2022a , and I'm unable to find FCN block you use to put equation. what should I do ??
it is a function that you must create yourself
He created a function, but didnt tell us what the function code is @PZ Engineering
hello thank you so much for this informative video, i did not understand the part of block " max" , if someone could help me pls.
Hello, Thank you for your comment, What exactly that you di not understand ?
@@pzengineering2020 why did you add "max" block , is it so that the input could not be 0A?
Great
Please tell me why using Max block
hello sir where can i get the fcn block?
Hello sir..How to get the fcn1 function at 6:55 ?
in search box just typ "fcn"
i dont finde the FCN , how can i have it
شكرا❤🌹
Hello thank you for the greet video
But can you explain the following
60000
400
0.919
0.995
Thank you
Bonsoir Asque réalisation afficher ???coupe
if anyone can explain why the resistance value is 15 and how this value affect the output results
Hi thank you for your comment, The resistance value may vary based on your load and type of output you want to achieve.
you used bus selector but didn't show how you created the bus and what components you used to create the bus along with the input values. if anyone know plz let me know i'm in the middle of my assignment.😢
How can I add propeller motors with the output? I'm also in the middle of my assignment 🥲
Como puedo agregar la full cell, no me aparece ?
Hello .
it's urgent
can you please tell me how can i connect two fuel cells in series?
Hi, you can connected the same way you connect batteries in series
@@pzengineering2020 Thank you
Good morning sir !
Hi thank you for your comment
Can you help me I can't do the same steps
hello, thank you for your comment, What are the challenges are you facing ?
Erreur in expression for "untitled/fcn ".an input index exceeds its input width of 1
@@saidaniabdou6386 Noted, can u please try to follow step by step
Thanks for the tip, I'll try again
@@saidaniabdou6386 I hope you got it right
Could you send slx file of matlab
Hi can you send me this file please?
Sir can you help us with active cell balancing
Como puedo agregar la full cell, no me aparece ?
Hi thank you for your comment, I don't get your question