Cutting EVA Foam on a CNC Router
HTML-код
- Опубликовано: 6 окт 2024
- Demonstrating EVA foam cutting applications on a customer's standard series 1300mm x 2700mm table as part of final testing before collection.
This machine features a few of our popular optional extras available with our standard series :
2.2kw water-cooled ATC spindle (24 000RPM)
Closed-loop feedback hybrid servo motors
5 position tool changer with offset measuring
T-slot clamping system with replaceable MDF
sections
Air blast nozzle for chip clearing
For more information on the cnc machines we manufacture, visit our website - www.kelbrandcn...
Very cool, thanks for sharing. That is a nice machine you guys manufacture Kelbrand. ♨♨♨
Hi Jean, thank you for the kind comment.
that foam gets everywhere
Run this using G64 and it would run a lot smoother given the pocket is likely defined by a traced spline instead of a series of arcs and lines.
Thank you for sharing this information.
What is your tool using
Any info on feeds, speeds and tooling? Thanks!
Hi, We used feed override for most of the toolpath but were initially cutting at 25mm/sec feed.
I love this, I think your machine is a bit overkill for this project though.
How about I give you my 3018 and take your machine off your hands.
I am literally doing you a favour, LOL
Thanks for sharing 👍
Thank you for the comment, If only this was our machine to give.
You're cutting too slow and no reason not to cut to full depth! Cut foam as fast as you're CNC will let you.