E.ArthurBrown has an excellent hand guard that looks like it was made for the Samson stock. Just beautiful. It matches the width of the stock and utilizes a clip that fits the recess of the B-TM stock.
Great video. Samson nailed it for sure. I have a factory side folder ranch rifle and the Samson folder mini 14. And stainless and black 10-22. The factory folder and Samson are remarkably similar in every way. Samson stock locks up tighter and is of better quality. I waited for over a year for my first and immediately purchased another x3. Worth every cent invested.
got one of these for my 10/22 compact (16-inch barrel) refinished it in stainless and had the flash suppressor pined and welded in place to be on the safe side (overall length) it's a great little gun. I didn't like the samson heat shield though it is way to small (looks strange), i went with the choate machine and tool heat shield, it looks way better.
I just bought one of this last week and mine did not come with either of those QD sockets. None of the sites that were selling these stocks offered it with the kit either. I did ordered the "Gray" Samson QD socket barrel band to match it though. My original barrel band gave out a few years ago after they stopped selling the replacement aluminum barrel bands. The black plastic just wouldn't have looked right so rather than using my NOS aluminum barrel I opted for the Samson. The rear qd socket I didnt see anywhere alone or in a kit.
Awesome video thank you. It looks great. I think I am going to go for this set up on my tactical 16" that already has the flash hider and threaded barrel. One thing that concerns me is I am not sure how I will mount the heat shield as the barrel on the tactical model doesn't have a spot for it? Any advice? Thanks
Samson himself! These things are beautiful, a friend and I just bought matching cheap 10/22s and plan to get these stocks for them. They're just so cool 😍
Mine gets here tomorrow! I’ve been watching all the videos and yours is easily the best!! I didn’t order heat shield and flash hider but after seeing yours I definitely am.
We need to have companies going back. M3 grease gun recreation Mp40 recreation Every cold war smg from eastern europe recreation Those would all sell like hotcakes
The 16 inch version robs you of the dovetail rear sight, hence….you can NOT install the B-TM heat shield unless you dovetail the barrel yourself. Choate makes a heat shield that works on the 16”, but it just does not look as good. I ordered both. I am seriously considering making my own from steel or aluminum.
Have a mini 14 with this stock and I’m tempted to buy another 10/22 to outfit with one… stupidly sold my 10/22 several years back while thinning out my collection a bit.
Thank you for this review. I would like to know how long your barrel is and how short the whole setup will be with stock folded down. I love the A-Team series andthat stylish stock, but for legal reasons over here I must make shure that the 10/22 doesn't get shorter than 60 cm.
@@FirearmFreedom Okay, thank you! Now I got an educated guess that it wouldn't come under 24 inches. So I will most likely don't create a short gun so I'm safe from that. Now there is just one potential issue left: German regulations say that you can't have semi-automatics looking similar to fully automatic firearms of war for sport shooting when its cartrige cases are below 4 cm in length. This renders a semi-automatic AR/AK derived longguns (with folding stocks) chambered in .223 fully okay, but outlaws a .22 rimfire with this stock because it is a siderfolder with pistol grip looking like a war machine.😵💫 Oh by the way: For hunters this would be perfectly okay, but only with a two round capacity magazine. Fun stuff - isn't it? This is so logic...
🤔🤔🤔 I also dislike the other 10/22 stocks that mimic other firearms. The only aftermarket stock I ever truly liked is the old Tapco Intrafuse stock that’s no longer in production. This thing here is just cool and seemingly very practical. I’m sure it’s worth the money. I would prefer it to be a laminated stock got more durability but this is cool to. Awesomeness in regards to the video, thanks for posting it 👍🏽
Really nice firearm but not very smart on Rugers part to make the QD sling points only for right-handed shooters. They should have made those concessions ambidextrous. As it stands, this probably isnt the rifle for me on those reasons alone. I just shouldnt have to modify something like this out of inconvenience. It should be built into the design for all shooters not just some shooters.
I like my 10/22 variants to look like a ‘scary’ Caliber rifle from a distance (intimidation / show of force factor) and/or help me train some of the feel of a ‘scary’ caliber rifle with less expensive Ammo (training factor). Does it look like a Mini-14 from a distance??? Maybe with one of those archangel mags? Hmm 🤔
Probably the coolest 10/22 stock ever... Love it.
Couldn’t agree more!
Perfect for a kid, who loves the A-Team and the 70s vibe in general.
So perfect for me
Without a doubt they are sweet!
While $300 for a stock for a 10/22 is a bit steep, this is by far my favorite stock for the 10/22.
I am right there with you my friend, but it’s far to cool to pass up lol
E.ArthurBrown has an excellent hand guard that looks like it was made for the Samson stock. Just beautiful. It matches the width of the stock and utilizes a clip that fits the recess of the B-TM stock.
Huh I will have to check that out thanks for the comment!
Great video. Samson nailed it for sure. I have a factory side folder ranch rifle and the Samson folder mini 14. And stainless and black 10-22. The factory folder and Samson are remarkably similar in every way. Samson stock locks up tighter and is of better quality. I waited for over a year for my first and immediately purchased another x3. Worth every cent invested.
Couldn’t agree more, thanks for watching and taking the time to comment!
One of the coolest firearms in my opinion that you have had on the channel. Dennis.
Thanks so much for the comment Dennis I would have to agree it is pretty sweet!
got one of these for my 10/22 compact (16-inch barrel) refinished it in stainless and had the flash suppressor pined and welded in place to be on the safe side (overall length) it's a great little gun. I didn't like the samson heat shield though it is way to small (looks strange), i went with the choate machine and tool heat shield, it looks way better.
Thanks for the heads up on the heat shield I will have to check it out!
Awesome setup!👍
I'm a pass on flashiders for .22s more compact is better
Couldn’t agree more this was really just to complete the look lol
Is the handgrip interchangeable with other handgrips?
I just bought one of this last week and mine did not come with either of those QD sockets. None of the sites that were selling these stocks offered it with the kit either. I did ordered the "Gray" Samson QD socket barrel band to match it though. My original barrel band gave out a few years ago after they stopped selling the replacement aluminum barrel bands. The black plastic just wouldn't have looked right so rather than using my NOS aluminum barrel I opted for the Samson. The rear qd socket I didnt see anywhere alone or in a kit.
Nothing wrong with that, I’m glad you were able to get one!
Awesome video thank you. It looks great. I think I am going to go for this set up on my tactical 16" that already has the flash hider and threaded barrel. One thing that concerns me is I am not sure how I will mount the heat shield as the barrel on the tactical model doesn't have a spot for it? Any advice? Thanks
Following!
Fitment with aftermarket barrels and receiver’s might be interesting -
Ya unfortunately I don’t think the heat shield could be mounted without a rear sight notch on the barrel. Thanks for watching!
Built this out with a franklin armory binary trigger. Very nasty!
That’s sick! I would love one in this build I may have to grab one and check it out
Another company sells thread adaptors for standard barrels, attaches just like the your flash hider
Oh very cool I will have to check those out thank you!
This setup is awesome!
Thanks man!
Love the ATM stock for my mini 14 might have to pick this up so my Ruger's can be twins
Without a doubt dude it’s the perfect combo!
Just bought one. Gonna look great with my Acculite bull barrel
Thanks for the love!!
Samson himself! These things are beautiful, a friend and I just bought matching cheap 10/22s and plan to get these stocks for them. They're just so cool 😍
Mine gets here tomorrow! I’ve been watching all the videos and yours is easily the best!!
I didn’t order heat shield and flash hider but after seeing yours I definitely am.
Thanks so much for the kind words man I’m so happy you found my video helpful, thanks for watching!
Hello, great video. Quick question I know its an older vid, but is that front sight you have? Thanks!
The front sight was also from Samson it’s a great set up. Thanks for the comment!
I've been planning on buying one within a month. Thanks for the info.
Awesome I would highly recommend it, thanks for watching!
"Love it when a plan comes together."
🙌🏻🤣
@@FirearmFreedom Perfect comment....George Peppard (Hannibal) is smiling down upon us.
If they would please make one for the PC Carbine.
Now that would be cool!
I know what I'm buying myself for Christmas! Great looking stock, gotta have it!
We need to have companies going back.
M3 grease gun recreation
Mp40 recreation
Every cold war smg from eastern europe recreation
Those would all sell like hotcakes
Could not agree more man it is the way! Thanks for the comment
The 16 inch version robs you of the dovetail rear sight, hence….you can NOT install the B-TM heat shield unless you dovetail the barrel yourself. Choate makes a heat shield that works on the 16”, but it just does not look as good. I ordered both. I am seriously considering making my own from steel or aluminum.
Oh that’s a bummer ya some of the models may just not work thanks for the comment!
Have a mini 14 with this stock and I’m tempted to buy another 10/22 to outfit with one… stupidly sold my 10/22 several years back while thinning out my collection a bit.
That's a looker, for sure!!
Thanks man I agree!
I have an original Mini 14 GB folder. I need one of these for one of my 10/22s.
That’s sweet I wish I had one of the original minis
Thank you for this review. I would like to know how long your barrel is and how short the whole setup will be with stock folded down. I love the A-Team series andthat stylish stock, but for legal reasons over here I must make shure that the 10/22 doesn't get shorter than 60 cm.
So this is a 20” barrel if I remember right but I’m not sure what the over all length would be folded maybe 31-32”
@@FirearmFreedom Okay, thank you! Now I got an educated guess that it wouldn't come under 24 inches. So I will most likely don't create a short gun so I'm safe from that.
Now there is just one potential issue left: German regulations say that you can't have semi-automatics looking similar to fully automatic firearms of war for sport shooting when its cartrige cases are below 4 cm in length. This renders a semi-automatic AR/AK derived longguns (with folding stocks) chambered in .223 fully okay, but outlaws a .22 rimfire with this stock because it is a siderfolder with pistol grip looking like a war machine.😵💫 Oh by the way: For hunters this would be perfectly okay, but only with a two round capacity magazine.
Fun stuff - isn't it? This is so logic...
It really transforms the rifle into a modern day option with old school easy functions.
The USA AK!
I totally agree! Thanks for the comment
Awsome , great fun with a caliber that your can afford to enjoy.🤘
Make sure you put on your Halloween costume before you go to the range
Hmm 🤔 need to think more about this ...
What's the shortest barrel length to keep the overall length above 26.5 inches when folded?
Does it come with a barrel band or can I use the stock one ?
🤔🤔🤔 I also dislike the other 10/22 stocks that mimic other firearms. The only aftermarket stock I ever truly liked is the old Tapco Intrafuse stock that’s no longer in production.
This thing here is just cool and seemingly very practical. I’m sure it’s worth the money. I would prefer it to be a laminated stock got more durability but this is cool to.
Awesomeness in regards to the video, thanks for posting it 👍🏽
Now available for bull barrels!
I saw that, that’s sweet!
Is this Cali legal
I just ordered mine from Ruger and used a $100 promo code I received after purchasing a Ruger American 308.
is all this legal in Quebec canada?
Unfortunately I don’t believe so
Would have been cool to see it shoot with the stock folded,considering it's a folding stock
Usually I do not quite sure why I didn’t attempt that in this video, sorry man!
@@FirearmFreedom at 13 52 you shoot it folded, so you did attempt it lol
Rifle length with the stock folded?
According to Samson you get 26.25” with a 18.5” barrel and the stock folded.
The other person got it right!
Anyone know a bipod that would work with these
You would probably just have to use the same sling swivel point that’s below the gun
Great video
I just got mine in the mail today i orderd it after this video i got it of midwayusa it came in 1 day
Oh excellent! I hope you enjoyed it!
Amazing revamp of a classic firearm! And being able to shoot the thing for dirt cheap is a major plus. Definitely getting one soon!
Really nice firearm but not very smart on Rugers part to make the QD sling points only for right-handed shooters. They should have made those concessions ambidextrous. As it stands, this probably isnt the rifle for me on those reasons alone. I just shouldnt have to modify something like this out of inconvenience. It should be built into the design for all shooters not just some shooters.
They’re introducing the “New” bull barrel stock soon!!!
Very cool!
I'd like to see a stock like this for my Marlin 795.
Now that would be pretty sweet!
Am I wanting to much for a Mini-14 with bayonet mount/front sight, flash hider and AC556 stock with AC556 happy switch?
Not wanting to much at all lol
Hannibal approved
🤣😂
AR 7. , would be nice , , floating stock in desert scenario ,
The perfect training aid for A-Team members 🤣
Exactly! 😂😂
Hannibal Smith approves.
🙌🏻🙌🏻😂
Dope shit
My advice---Don't buy a ruger 10/22! They multiply like 🐇 🐇 🐇.
You know that is very very true lol
I like my 10/22 variants to look like a ‘scary’ Caliber rifle from a distance (intimidation / show of force factor) and/or help me train some of the feel of a ‘scary’ caliber rifle with less expensive Ammo (training factor).
Does it look like a Mini-14 from a distance??? Maybe with one of those archangel mags? Hmm 🤔
😂😂😂 understandable
Sweet
Wow!👍🏽😀❤️🇺🇸
Can't justify spending $300 on this beauty. But, then again, you got what you pay for.
Very true, thanks for watching as always!
Pretty cool looking conversion, I actually came here looking for a MAGA hat launcher. This is almost better tho…. I’ll take 2😮
Put a binary trigger on it
Like # 666 😈
"Couldn't of".... 😑