+MLGSheep1 I mean I get a lot of sub 5. but still have solves that I can't find a side easily that turn out being 7. pb of 1.24. I'm sure if I restarted all my times it would improve. what are you at?
I am taking this video very seriously. When I first watched it, I was averaging about 15 seconds on a Cyclone Boys 2x2. Now, I average sub-8 on a Dayan. I am not quite there yet, but still, a huge improvement.
i dont understand why you would learn cll when you try to get sub3 while only less than 500 ppl on earth got an official sub4 avg shouldnt you learn cll when you avg like 5 or 5.5 sec?
I know this is probably a dumb comment but, I know how to perform Ortega solve and I added LBL but I can't turn very fast but my solves seem to be very fluid and I learned how to build faces quickly and I predict where my bar is gonna be but I can't get past sub 6/7. Please Help :(
You could learn it now if you wanted to. But personally I would say wait till you're at least low 4. People who average about 5 seconds tend to have recognition issues.
I watched this video before going to a comp, beleiving i was going to average sub 5, i averaged about 7 sec. i must be doing something wrong. Screw it, i'm learning CLL. (And maybe EG-1) and have a good gear, i have a Guoguan Xinghen M.
when I got my WitTwo it was utter garbage and even after tensioning it still could barely corner cut and whoever tensioned it first unevenly did it because on one side could corner cut at 45 but the rest could barely at all.
hey, I just started 2x2 speed solving. I've been doing this for less than a week. my average is so bad (ranges from 40-50 seconds) any my pb is a low 13. I came up with a method that now realizing that it's slow and inconsistent. learning Ortega to get more consistent solves, and hopefully plan to get a better Cube than a Rubik's brand...
I have a moyu lingpo 2x2 and I usually average around 7-12 seconds and I use ortega I follow this yet I still average around 7-12 seconds can Someone give me advice please?
should i learn cll before ortega? i currently use lbl and average 6-8 secs and i hwve been thinking of switching methods but didnt know which to switch to
Hey I have everything you said ,,I have a moyu lingpo ,, I predict bar ,, and everything else u said but I sub 10 ,,, I have problems on seeing where the pbll situation is ,,, PLZZzzzzz help me ,, replyASAP
Yeah I don't understand that either :/. I average around 5.3 seconds and when I try to go slower my recognition time keeps the same (so I get times over 6 seconds). How are you supposed to look ahead on 2x2 (I know how to lookahead on 3x3 and I average 19-20 seconds)
SuperGutgutgut you mean the first face? or you mean predicting pbl from oll (like a one-look since first face)? I predict the first bar, and know a Little bit of predicting pbl, only with the H cases
in the stock tensions, brand new it's terrible pops and stuff like that. after tensilning it living it then breaking in for like 2 weeks cleaning it out and relubing then it's awesome
I build a WHOLE first layer so only have to do J perm and Y perm. Any easier way i can recognize and memorize those algorithms? (I use ortega from cubewhiz.com)
Hi, I'm a roux solver, so I'm learning 1-look CMLL. DO you think I should use that as CLL and start changing CMLL algs to CLL as time goes or should I stick with ortega and only use CLL when I know the CLL algs since CMLL algs are ineficient?
I SUCK at 2x2 and I average around 13 seconds and I want to be much faster. I want to skip ortega and do EG. Is that OK? I just wanna learn CLL, EG-1, and EG-2 instead of all the ortega algs. Is that OK? Is there any problem for that?
+Brobiks just because other cubers like a cube doesnt mean its the best, some people like scratchier more controllable cubes, and get faster times, or some people prefer smoother and faster cubes and get faster time. its preference
experiment man i can do it but it is hard to learn i do it by muscle memory so i can't write down the alg but look at what he does in the video you might be able to learn from watching him
I just starting 2x2 I only have a rubiks brand my yj guanpo broke and my pb is 30 with a rubiks brand and I average around 45 any ways to get faster besides this video
![[Tutorial] How to be sub 2.5 On 2x2 From The Former World Record Holder](http://i.ytimg.com/vi/ijWuchJM-iQ/mqdefault.jpg)
![[Tutorial] How to be sub 2.5 On 2x2 From The Former World Record Holder](/img/tr.png)
lol his intentional choppy times are my average...
+MLGSheep1 I've been cubing for only a few months. give me a break
+MLGSheep1 I mean I get a lot of sub 5. but still have solves that I can't find a side easily that turn out being 7. pb of 1.24. I'm sure if I restarted all my times it would improve. what are you at?
@@kennysmith1311 now
I agree with Chris because I only learnt bar prediction for Ortega/varasano and I am sub 3.5
I am taking this video very seriously. When I first watched it, I was averaging about 15 seconds on a Cyclone Boys 2x2. Now, I average sub-8 on a Dayan. I am not quite there yet, but still, a huge improvement.
I'm sub 5 with a cyclone boys 2x2. You just have to break it in then its faster but good I am getting a dayan
Well, yes, but that was an unlubricated Cyclone Boys 2x2 which is terrible. Now I average the same as my Dayan when it was lubricated. Now I'm sub-7.
48fanfromky what method do you use?
or now I use advanced LBL however I plan to use Ortega "sune"
great!
I can get about 3.00 with Ortega. Maybe sub 3 if I tried really hard.
I am 2.84 with ortega and my first rubiks cube came yesterday .
Not fake scamble
Edit: 1.44
1.80 Ortega insert R2 F2 R2 canceled in to the pbl
What's the scramle
Scramble
@@gamingtechroomgtr4481 He's talking about average, not single.
am i the only one who uses oll for the first layer sometimes?
me too
yay i'm not weird xD
Sometimes, it's a necessity... :/
:/
yes
Thanks, for 2 months, I watched your video, then I jumped from sub 6 to sub 5!
I practiced this for 10 mins..and now I'm almost sub 5 ..Thanks man
Thanks Chris! im even better at 2x2 i use to avearge 7 - 9 seconds on 2x2 now im averaging around 4.9 - 7,1
with a pb of 0.50
I use lbl to get sub-4 to sub-6
5 years later he still uses the Dayan for his main lol
i dont understand why you would learn cll when you try to get sub3 while only less than 500 ppl on earth got an official sub4 avg shouldnt you learn cll when you avg like 5 or 5.5 sec?
yo its kinda funny watching this video in 2022
even stranger in 2023
thx my time went from sub 10 to sub 5/6 your a big help :)
I know this is probably a dumb comment but, I know how to perform Ortega solve and I added LBL but I can't turn very fast but my solves seem to be very fluid and I learned how to build faces quickly and I predict where my bar is gonna be but I can't get past sub 6/7. Please Help :(
then practice turning faster
what app is that on the ipad?
Five Timer
+Dank KiD blue spoderman. Spoderman is so hilarouis.
Kind of looks like Chao of Five
Five timer
Your videos are really helpful.
You could learn it now if you wanted to. But personally I would say wait till you're at least low 4. People who average about 5 seconds tend to have recognition issues.
I watched this video before going to a comp, beleiving i was going to average sub 5, i averaged about 7 sec. i must be doing something wrong. Screw it, i'm learning CLL. (And maybe EG-1) and have a good gear, i have a Guoguan Xinghen M.
what is the song the link in the discription doesn't work
Mohammed Channiwala did you find the name of the song?
Full EG+ TCLL. So, CLL, EG-1, EG-2, and TCLL.
when I got my WitTwo it was utter garbage and even after tensioning it still could barely corner cut and whoever tensioned it first unevenly did it because on one side could corner cut at 45 but the rest could barely at all.
I just got a 6.27 with lbl!
How can I learn to solve more fluidity
hey, I just started 2x2 speed solving. I've been doing this for less than a week. my average is so bad (ranges from 40-50 seconds) any my pb is a low 13. I came up with a method that now realizing that it's slow and inconsistent. learning Ortega to get more consistent solves, and hopefully plan to get a better Cube than a Rubik's brand...
You should really learn Ortega if you haven't yet. It's a lot faster than Layer by layer.
thanks
I have a moyu lingpo 2x2 and I usually average around 7-12 seconds and I use ortega I follow this yet I still average around 7-12 seconds can Someone give me advice please?
Drop Scoutz Practice
can i use a moyu lingpo
Radioactivefighters 308 of course!
Doom MxPx my main. one and only...
The best
Do you think the 2-2 we will be beaten anytime soon?
great vid my pb avg is 3.08 can't wait for the next video :)
Whats the OLL Alg @ 1:15?
It took me a while to figure out but its:
R2 U2 R U2 R2
Speed Cube Sam well, i always used that one too
should i learn cll before ortega? i currently use lbl and average 6-8 secs and i hwve been thinking of switching methods but didnt know which to switch to
+Max Ominsky thanks and i already switched to Ortega, i average like 5-6 seconds
i never uaed ortega as my main mothed i learnt cll
Hey I have everything you said ,,I have a moyu lingpo ,, I predict bar ,, and everything else u said but I sub 10 ,,, I have problems on seeing where the pbll situation is ,,, PLZZzzzzz help me ,, replyASAP
I average around 5-7 seconds using layer by layer and i learned all sunes and antisune cll algs should i continue to learn cll or learn ortega first?
Learn ortega from crazybad cuber then learn either cll or ss method cll skips pll and ss skips oll y
does anyone know any y-perms for a 2x2???
tell meh
Lel Nope Its the same as 3x3
Please answer how to be lookahead in 2x2 please upload a vedio for it
Yeah I don't understand that either :/. I average around 5.3 seconds and when I try to go slower my recognition time keeps the same (so I get times over 6 seconds).
How are you supposed to look ahead on 2x2 (I know how to lookahead on 3x3 and I average 19-20 seconds)
Alonso Sanchez Elias Looking ahead in this situation is to predict your PBLs by knowing where the bars will be
SuperGutgutgut you mean the first face? or you mean predicting pbl from oll (like a one-look since first face)? I predict the first bar, and know a Little bit of predicting pbl, only with the H cases
Alonso Sanchez Elias
Predicting where your bar will be. Then when you get to OLL plus PBL, you'll know where your bar is so you adjust if necessary.
MikamiHero I already do that
hey i average a little over 5 seconds, should i start to learn cll now?
I'm getting about 10- 15 second solves shall I start learning ortega?
CubingMink23 OK cheers
Does the Dayan 2x2 pop a lot lime everyone says? Or do you just need to lube+tension it? if so, then how?
in the stock tensions, brand new it's terrible pops and stuff like that. after tensilning it living it then breaking in for like 2 weeks cleaning it out and relubing then it's awesome
+Mikus Haikus lubing
one time I just solved the white side on bigginers method and was solved from there and my time was 6.8, i got extremely lucky
I build a WHOLE first layer so only have to do J perm and Y perm. Any easier way i can recognize and memorize those algorithms? (I use ortega from cubewhiz.com)
Where do you buy that cube?
Can i do sub6 whit Cycloneboys?
Ya
im averaging about 4.5 with ortega, and want to speed up, but i am debating between learning eg 1 first or cll, and reccomendations?
+BulltonCubing Ortega can easily get you sub 4
learn cll
I had to watch the video several times but now i'm sub 5.
wait what i just got 0.97 seconds with ortega H O W
Hi, I'm a roux solver, so I'm learning 1-look CMLL. DO you think I should use that as CLL and start changing CMLL algs to CLL as time goes or should I stick with ortega and only use CLL when I know the CLL algs since CMLL algs are ineficient?
hey iuri its me kevin
Hello, :D
Now
Iuri is a world class cuber and my OH inspiration. It is a bit awkward and funny to see him getting confused between learning cll or cmll. 😀😃😄😁
#CameHereFromDerpy
me 2
Me 3
How long would you say on average it takes to get from 5 to 4?
I can easoly get sub 8 with beginner, is this good
Whats your average with Ortega?
where did you learn oll it looks easier and shorter than mine
He's just fast
Please give the full name of the dayan 2x2
The full name is itself just dayasn 2×2 only. In 2020 u shd buy a different 2×2 like dayan tengyun m or valk 2 m. Hope this helps.
U can use R2 B2 R2
R2' F2 R2 is better
How tf do you look ahead
I SUCK at 2x2 and I average around 13 seconds and I want to be much faster. I want to skip ortega and do EG. Is that OK? I just wanna learn CLL, EG-1, and EG-2 instead of all the ortega algs. Is that OK? Is there any problem for that?
Don't skip Ortega. Ortega is a very good method
But if I just wanna get very fast, is there problem with skipping ortega?
Echu Cuber Ortega can get you sub 4 so you can be very fast with Ortega I would say once you're around 4 seconds switch to cll
Ok thank you!
ortega is part of eg so start with ortega, but ortega can still get you very fast
should i learn look-ahead on 2x2 before 3x3
Some Random Fellow no, 2x2 is mostly drilling algs and spamming tps. 3x3 look ahead is a must
Can I use a Lingpo instead of a Dayan/Wittwo?
Yes. That's fine.
no
What??? Why not? I hat the feeling of the Lingpo, but since I paid for it, I will use it.
+Brobiks just because other cubers like a cube doesnt mean its the best, some people like scratchier more controllable cubes, and get faster times, or some people prefer smoother and faster cubes and get faster time. its preference
is that app ur using their on android
Cyo what method do you use?
how hard is it to jog?
What counts as sub 5? Is a sub 5 ao100 enough or is it your entire session average?
That's enough
Ben Schneider Try chaotimer, it's an app that a lot of speed cubers use.
Does anybody have any tips on how to execute an upside down t perm with Ortega
experiment man i can do it but it is hard to learn i do it by muscle memory so i can't write down the alg but look at what he does in the video you might be able to learn from watching him
I need to get a different 2x2 dunno why I got a pillowed v cube
What app is that
How can I get my dayan to move fast! Also it explodes!
Tension it. I would not take it apart as it is extremely and I MEAN EXTREMELY HARD to reassemble.
+Ethan D. (Nitro) it's not hard to assemble at least mine's not
Same here BRCuber
which is the alg at 5.23?
Lorenzo Bellocci t-perm
so houls I be sub 4/5 before learning cll/eg?
thanks!!!!!!!!
someone tell me the song if you figure it out
joseph chauvin it is in the description
Doesn't work
what app is that for your timing?
Which app is on your ipad?? Thx
+Pineipol Tv He replied to another comment, it is Five Timer
thanks!
I just starting 2x2 I only have a rubiks brand my yj guanpo broke and my pb is 30 with a rubiks brand and I average around 45 any ways to get faster besides this video
Ava Dalley Have you learnt ortega. If not do so
Ava Dalley how are you doing now?
What method is good to use?
Beastly_ Gaming Ortega
Beastly_ Gaming EG-1
WHAT IS THE BAR HELLLPPPP!!!
Song?
+Nivas Harisimha Reliant K Dubstep
You can almost become sub 5 with lbl using 2look ll
What is the app he is using?
five timer i think
yeah it's five timer
These examples seem a bit unrealistic. Massive pauses, but then algs which are almost sub 1.
ChrisCuber123 He can stop doing sub-0.7 algs?
He said that he was turning fast but very choppy. he's doing sub-0.7 algs and having massive pauses to make it obvious.
Is a guoguan xinghen good
how can I be sub 7 on Ortega?
Practice
This video shows you how to be sub 5/4..... So watch the video
M
Don’t rotate cube
You cant
umm my tps sux im like 4 tps
I loosened my 2x2 jelly cube it's really fast
Please please please can you make a video showing your OLLs AND PBLs? I beg you.
I already have a video on this...just search my channel.
cyotheking but i couldn't find OLLs
There isn't really a need for OLLs. Those are all on my website.
really I found pbl algs but oll :(
cyotheking olls are no there in your website
I get around sub 6 but im lazy and i didnt learn full pbl. I probably should xD
I did everything you said, and I still can't get sub 5.
You might need a better cube
I use a dayan, and I am pretty much sub 5 now, just had to increase tps
My TPS is bad
what, I was just correcting him.
i wonder how hard it is for you to solve it that slow lol
Who is Watching This In 2020 LOL
Lol me
just got 2.3 thx
hay
how the fakin hell was your dAyAN turning so fast??
he just had fast tps
dat music
I use DaYan
4.41
and im over here with a ghosthand :(
I know lbl and ortaga
for some reason i accidentally uses lbl because i was trying to do ortega without to per mutate the bottom layer
Cyo... You
#remix airhorn