From the Vault: Caleb's New Hotness

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 246

  • @CalebSavant
    @CalebSavant 2 года назад +236

    Thanks for watching guys! Happy Veterans Day to my fellow Veterans out there!

    • @Beanmachine9198
      @Beanmachine9198 2 года назад +2

      To you as well brother, HOOAH GEAUX ARMY💪🇺🇸

    • @leerethamel3204
      @leerethamel3204 2 года назад +3

      GO NAVY !!

    • @seanridner1385
      @seanridner1385 2 года назад +5

      Title was clickbait, I thought this video was all about your hair!

    • @ThePatriotParadox
      @ThePatriotParadox 2 года назад +2

      Thank you, I just ordered my MI handguard for my 13.9 build, just need a flash can and a can of alumihyde

    • @scaleworksRC
      @scaleworksRC 2 года назад +1

      Awesome setup man, and thank you for your service! As a fellow wrong hander, the first thing I did to mine was put an ambi 45 degree safety, also put the shorter lever on the left to keep it out of the way.

  • @markjordan348
    @markjordan348 2 года назад +3

    It's nice to see somebody using thought and reasoning rather than it just looks cool when choosing parts for their AR.

    • @john-paulsilke893
      @john-paulsilke893 2 года назад

      Ditch to irons or install off set. His glass isn’t QD so he needs tools to get sights if he breaks his glass. (Honestly it’s LARPing, I do it, you do it, we all do it but in this case it doesn’t make too much sense).
      Also he can’t confirm his irons, so it’s to be assumed that they aren’t on. How many times have you had two optics on a gun and switched back to the set you don’t use often only to find they aren’t on. It could be different ammo, it could be the set screws loosened, or it could be from jostling.

  • @jackieeastom8758
    @jackieeastom8758 2 года назад +29

    🇺🇸Thanks to all of the veterans out there who stood and stand for my freedom. 🇺🇸God Bless and Keep everyone of you. 🇺🇸RED Friday 🇺🇸

  • @mabs9503
    @mabs9503 2 года назад +10

    The V7 port covers _do_ look cool.

  • @Oldhogleg
    @Oldhogleg 2 года назад +17

    I've been out of the AR market for years, so it was nice to be brought up to speed to on few things available these days 👍

  • @JRxxx
    @JRxxx 2 года назад +26

    18:48- You did it Caleb! You found the Golden Ticket to the Battle Arms Development Factory! Give my best to the Oompa-Loompa.

    • @baker90338
      @baker90338 2 года назад

      He was asking for .30-30 last I went.

  • @geoffreyjones2000
    @geoffreyjones2000 2 года назад +3

    Honestly, I like the battery compartments, sir

    • @john-paulsilke893
      @john-paulsilke893 2 года назад +2

      And if it’s a hunting gun a few sore rounds for the inevitable time you forget the mags or ammo. I have a small punch in one side, 3 hunting cartridges, and some small parts like gas rings and KFC wet wipes in the square compartment. (AR10 obviously). It’s never been useful but I’ve seen other people screw up this way so 2 ounces seems fair.

  • @project86xero
    @project86xero 2 года назад +3

    Yeah my main squeeze rifle has changed a few times as well.
    Running a Aero Precision M4e1 receiver set, Aero nitride BCG, Faxon Integrated flash hider gunner barrel, Aero gas block/gas tube, Midwest Industries 11.5 handguard, bcm vertical grip, Cry Havoc quick release barrel systen (great for discreet travel), Radian changing handle/safety lever, Magpul K2 grip, Phase 5 EBR bolt release (better versionof a bad lever), Magpul extended mag release (my lady has small hands), LWRCI UCIW PDW stock system, Holosun HE512C GD gold dot (I'm color blind and gold works), Vortex Micro 6x magnifier on a ADM flip mount (the vortex mount has too much play for 6x), Diamondhead polymer iron sights, and a Surefire 640df pro.
    I think that's everything. But basically I wanted a full size rifle that fits is a normal size backpack. An it works great for that.

    • @M8Military
      @M8Military 2 года назад

      Without a short stroke gas piston system the rifle is still going to be dated. Gotta get an hk416 upper

    • @project86xero
      @project86xero 2 года назад

      @@M8Military I got a Bren 2 and a Tavor 7. Both are short stroke gas piston guns. But guess what... neither break down to fit in an every day size backpack. Nothing beats a good old direct impingement AR15 when it comes to aftermarket options.

  • @roygaisser9230
    @roygaisser9230 2 года назад +6

    That truly is some HOTNESS you've got going there with that build, C. I have a grey Fostech that I love, but you've definitely got me thinking about "highlighting" it with some black parts---that's real sharp. And thanks for your service.

    • @frawdulent
      @frawdulent 2 года назад

      That be racissss yo.

  • @lorq3370
    @lorq3370 2 года назад +1

    I was watching the vid and at the 17:00 mark, the black Brownells ram logo was superimposed on your lower grey receiver. That looked cool.

  • @BV-fr8bf
    @BV-fr8bf 2 года назад +3

    New Hotness. Feels like a 'Men In Black' movie flash back!

  • @Bodhi1satva
    @Bodhi1satva 2 года назад +6

    Need a list of all the videos referred to in this one. Would love to see a price list or at least an overall cost to build such a weapon!

  • @Witness27
    @Witness27 2 года назад +5

    Would love to see a vid of you on a shooting course with this thing!

  • @rsr3959
    @rsr3959 2 года назад +3

    That's a norgon, not a troy ambi mag release. Troy has the lever towards the bottom.

  • @ThatLalalaChickx
    @ThatLalalaChickx 2 года назад +3

    Very nice setup. I'm starting to like that gray coloring.

  • @sr-5568
    @sr-5568 2 года назад +4

    What a beautiful rifle I can tell your very proud of it.

  • @oathtaker2768
    @oathtaker2768 2 года назад

    I watched this video when it dropped, but I just had to watch it again. Love your videos

  • @davidunderwood3605
    @davidunderwood3605 2 года назад +3

    As always I learned something today. Good video. Really like that ambi bolt catch.

  • @nsob8897
    @nsob8897 2 года назад +1

    I bought a rifle that came with a geisselle trigger. I'm now going to buy one for my other rifle..from brownells of course.
    Anyway, that is a very nice rifle ya have there. It's amazing how nice you can get a gun to look and operate with some know how and research. And of course having a buddy who can get you a top notch bcg can't hurt any.
    I like the idea of setting one up the way you did for this one. You have function all day long but you also made it look nice like one of those off the shelf eye catcher guns.
    Of course I'm not gonna copy this rifle but thanks for the ideas. Always something I can learn from other gun guys..

  • @bwrscott1
    @bwrscott1 2 года назад

    Always good having another correct shoulder shooter.

  • @1945tigers
    @1945tigers 2 года назад +2

    Very nice you made it your own.

  • @DinoNucci
    @DinoNucci 2 года назад +1

    Well done.

  • @don_sharon
    @don_sharon 2 года назад +1

    Awesome - thanks for all the great videos.

  • @joquin4618
    @joquin4618 2 года назад +1

    Nice ! Happy Veterans Day guys!!

  • @silentstryker1590
    @silentstryker1590 2 года назад +1

    That looks like a real nice setup, love that color too.

  • @hoosierplowboy5299
    @hoosierplowboy5299 2 года назад +2

    Awesome build, Caleb! Well done!!!

  • @Yankeepride03
    @Yankeepride03 2 года назад +1

    Awesome build !!! 🔥

  • @johndilday1846
    @johndilday1846 2 года назад +1

    Awesome build! It looks great.

  • @EchoSigma6
    @EchoSigma6 2 года назад

    Gray and OD Green rifles are so nice to look at.

  • @pville_piper5125
    @pville_piper5125 2 года назад +1

    Nice gun, love the finish!

  • @reedafd5787
    @reedafd5787 Год назад

    Not sure about the efficacy of BUIS on the top rail if your not running QD scope mounts.
    I’m left-handed as well, and put my BUIS on the left 45 degree angle M-LOK slots of my hand guard.
    It makes for a short sight radius, and it takes some training to get a quick sight picture, but I feel it provides the most redundancy in an actual live-fire scenario.
    I’d love to have a Trijicon RMR on the 45 degree offset, along with a Larue Tactical QD scope mount, but that’s about $800 I can’t afford at this time.
    I’m no cheapskate when it comes to quality kit, but I still have to live within my means.

  • @nunyabinness3574
    @nunyabinness3574 Год назад

    Its really quite simple...i see Caleb, i click.

  • @nunyabinness3574
    @nunyabinness3574 Год назад

    I too, am left eye dominant...which makes me cross eye dominant because im right hand dominant. I learned that after i bought my first AR, many years ago. The first time i held the rifle up, im like WTF?! where is the sight?! Then realized which i had naturally closed...the right eye. Obviously never had an issue because i just move the pistol in front of my left eye (never realized before then). Caleb employs the switch hitter method, but i just kinda trained myself to be able to shoot a rifle with my left i shut....now its just automatic...i aim a pistol, right eye closes. I aim a rifle, my left eye closes

  • @evanthompson9993
    @evanthompson9993 10 месяцев назад

    Great set up! If I’m not mistaken, that’s a Norgon ambi magazine release. Not a Troy

  • @marinechapssemperfiout9939
    @marinechapssemperfiout9939 2 года назад

    Caleb, disregard my last transmission. Great vid! Semper Fi

  • @UnfiItered
    @UnfiItered 2 года назад

    For those who are looking for a lower that has a PDQ lever. SilencerCo and Gibbs Arms has one. Aero had one but I've never seen it in stock (probably discontinued). I'm surprised you're gun don't have a weapon mounted light though.

  • @loquat44-40
    @loquat44-40 2 года назад

    Thanks for the huge amount of information for what a professional puts on their AK. The hand stop was of most interest to me since i have a few AR pistols that i want a way to prevent my hand from getting in contact with the flash hider and still be legal relative to foregrips.

  • @dsan94
    @dsan94 Год назад

    Love it; I have a very similar new build I did a few months ago and I absolutely love it

  • @voteholyk
    @voteholyk 2 года назад

    Caleb, if you get the Gieselle maritime bolt catch you can reach it with your trigger finger without breaking your grip. I shoot lefty as well and it is really nice.

  • @YellowHammer26
    @YellowHammer26 2 года назад +1

    👍👍for the video and all veterans

  • @CA.0verview
    @CA.0verview 2 года назад

    17:08 that f1 look a good deal like cryptic coating bcgs, I own one in that rose gold and their lighted bcg in dlc great products.

  • @miken9484
    @miken9484 2 года назад

    That thing is beautiful

  • @DB-yj3qc
    @DB-yj3qc 2 года назад

    Slow to respond, I've got one of the Battle Arms selector /safeties with the same finish in my part's collection somehow I broke the screw off in threads so out it went to part's box. I agree with seeing the rifle in fired condition is a step up for AR's to many get hung up on keeping them spotless clean... Still believing the B.S. about AR's not being reliable. Just lube, run it and on occasion run patch or boresnake if needed. Back in early 2000s I did a "Franken build" AR that only got oiled, shot put up then ran again for over 6 months of well over 5 k of ammo. Brass case, steel 55-62 gn. the "high tech" lube.... Walmart synthetic 10W30 oil. The reason I finally "cleaned it" was the mess it made in my safe, Jeep or anything it touched.

  • @berryreading4809
    @berryreading4809 2 года назад

    I currently another B5 stock sitting in the cart, but the magpul ACS and STR's are like $30 off right now at brownells! 🤫 Looks like I'm paying regular price for the B5 sopmod... Caleb talked me into it! 😉 although I'll probably grab another STR aswell for the price! Both stocks work well for me. I've actually never tried the magpul ACS, but boy is that price tag tempting! 😁

  • @reneescouch9035
    @reneescouch9035 Год назад

    Awesome video man!

  • @catherineb.
    @catherineb. 2 года назад

    That grey color is beautiful

  • @hectorpinol7951
    @hectorpinol7951 Год назад

    It’s a beauty Caleb!

  • @justauser
    @justauser Год назад

    This is super nerdy and i love it

  • @qwkartist
    @qwkartist 2 года назад +1

    Norgon was the originator for that mag catch

  • @DeafeningPew
    @DeafeningPew 2 года назад +1

    Caleb, you've got me thinking of milling my lower for a PDQ lever now... Why can't I just leave things alone.

    • @Pyreleaf
      @Pyreleaf 2 года назад

      Because it's objectively better, not least of which because it significantly reduces the likelihood of NDs.

  • @tonyc223
    @tonyc223 2 года назад

    Nice color.

  • @smokster0604
    @smokster0604 2 года назад +1

    Salute… God Bless America

  • @iyn1911
    @iyn1911 2 года назад

    Nice color!

  • @brianbelliveau5551
    @brianbelliveau5551 2 года назад

    Very nice work

  • @ianray8823
    @ianray8823 2 года назад +1

    *encounters minor mechanical hiccup
    "Fuckin...there we go"
    Truly a man of the people

    • @coder0079
      @coder0079 2 года назад +1

      Are you sure he swore? It kind of sounded like "If I can...there we go".

    • @stephen_crumley
      @stephen_crumley 2 года назад +1

      @@coder0079 you’re exactly right, he said “if a can”. 20+ min video of awesome products and in depth explanation and people focus on something so trivial

  • @royshobe6642
    @royshobe6642 2 года назад +3

    awesome thanks for making this video,! how much does it weigh?

  • @roguedefensefirearmsllc6194
    @roguedefensefirearmsllc6194 2 года назад

    Love the video, but one correction....that is the Norgon ambidextrous magazine release, not the troy. The troy industries has a paddle that says "troy". There are a lot of companies that now make that exact ambi mag release, since the patent expired. The Norgon is around $80 or $90, the cloned models run between $25 to $40.

  • @Jdowling357
    @Jdowling357 2 года назад

    Nice build. Very well thought out. Something you'd expect from a good gunsmith 👍

  • @vrvr6263
    @vrvr6263 2 года назад

    Caleb see if your friend can get me one of them F1 BCG’s. I got to have one! I missed my chance to get one back in the day and now you got to buy the whole gun to get one.Them thing are something else.

  • @botfoblhrp
    @botfoblhrp 2 года назад +1

    love the gun

  • @davejs2569
    @davejs2569 2 года назад

    Another great video!!!

  • @sheriff2550
    @sheriff2550 2 года назад +2

    Was wondering what do you use for your sling when it’s folded on the rifle?

  • @bobpritchard979
    @bobpritchard979 2 года назад

    Happy Veterans Day to you as well brother...

  • @Dmoore37
    @Dmoore37 2 года назад

    Sweet looking rifle! Good work!

  • @versoarmamentcompany
    @versoarmamentcompany 2 года назад

    It would be great if you would put a link to each of the videos you mentioned ("We have a video on that") in the description below.

  • @AllThingsLoud_
    @AllThingsLoud_ 2 года назад +2

    I like this build. It’s very practical and looks nice w/o begging for attention.

  • @evanacey1414
    @evanacey1414 2 года назад +1

    Fortis offers a TiN coated safety selector barrel.

  • @laughingdog6010
    @laughingdog6010 2 года назад

    Nice rig

  • @hairydogstail
    @hairydogstail 2 года назад +1

    I know it is not usually accepted, but I won't pin my gas blocks if they are under the hand guard. If the barrel-gas block is beaded, dimpled and set with Rocksett correctly, it will never come loose. Pinning a barrel can effect accuracy. I would like to see in a future video if your great mill job on the lower receiver for the ambi catch has any side effects by milling off the hard anodizing. I love the look and set up of your rifle and you did a great job with your choices and lower milling..

  • @vashmatrix5769
    @vashmatrix5769 2 года назад +1

    Where's the vid on why it's not a quick detach mount?

  • @deacadeind
    @deacadeind 2 года назад

    Awesome breakdown and awesome job. Gun looks and I'm sure fires great🍺🍺🍺🇺🇸🇺🇸🤘🤘💯

  • @XuroX.
    @XuroX. Год назад

    Nice gun. What's the little black strap on the handguard close to the reciever for?

  • @runlevelone
    @runlevelone 2 года назад +4

    Not for me, but thanks for sharing. Different strokes for different folks.

  • @awsomedude9111
    @awsomedude9111 Год назад

    @Brownells All I can think that you missed was the springs and pins, really I wanted to ask about offset iron sight. Wondering what the best are, different features. Is it even possible to mount a regular iron sight using a 45* offset? Really wanted to try having a RMR + front iron sight but not sure how possible or good it is.

  • @wess8444
    @wess8444 2 года назад

    At 11:27 Caleb mentions "there is a whole other video on why it is not a QD". Can anybody tell me the name of that video, I can't find it. Thank you.

    • @brownells
      @brownells  2 года назад

      ruclips.net/video/fMDWSVp0gTs/видео.html

  • @GeorgiaDawg404
    @GeorgiaDawg404 2 года назад

    Does the "scalloped" lever come included in the packaging? And is this the bad ass safety selector?

  • @lowerspeedhigherdrag
    @lowerspeedhigherdrag 2 года назад

    I didn't know brownells made uppers and lowers. Do they do variance manufacturing too?

  • @Unvaccinated100Percent
    @Unvaccinated100Percent 2 года назад +2

    Caleb is the hotness

    • @thefrogking481
      @thefrogking481 2 года назад

      No man should ever type that garbage.

  • @madride858585
    @madride858585 2 года назад

    Love the black/gray.

  • @PhilipPrindeville
    @PhilipPrindeville Месяц назад

    Not finding the PDQ ambi bolt release on the Brownell's website.

  • @l33b80
    @l33b80 2 года назад +1

    Do you ever experience the PDQ lever having to push up the dust cover slightly?

  • @gbuilds2667
    @gbuilds2667 2 года назад +1

    How do you feel about barrel shrouds with comps?

  • @Dr_K545
    @Dr_K545 2 года назад

    Why Rand CLP vs. the mil spec g96 CLP? Just wondering what you think, not talking s... Nice rifle.

  • @jeffhuntley2921
    @jeffhuntley2921 2 года назад

    Wish you could get a 13.7-14.5” barrel in 7.62x39

  • @ThePatriotParadox
    @ThePatriotParadox 2 года назад +1

    Would 1 can of Brownells Alumihyde be enough to paint my upper lower, handguard and my pistol slide ???

  • @BenRivered
    @BenRivered 2 года назад +1

    Sell that boom boom 2 me sir.. well done!!!

  • @mpatrick7860
    @mpatrick7860 Год назад

    I did not realize there would be gas blow back when using a suppressor. This might explain why I'm getting way dirtier upper and bolt carrier since I added a can. Any ideas of what I should do to counter this other than clean it more?

  • @JippaJ
    @JippaJ Год назад

    Nice stuff! Just wondering, why have flip-up iron sight when you can't take your optics off?

    • @cherokeesome
      @cherokeesome Год назад

      Joppa
      If you accidentally bump your scope or it fails in any way, you pull your scope off and flip up your sight and good to go.

  • @wtffrank
    @wtffrank 2 года назад

    Sound like a fixed gas block so maybe describe the barrel's gas hole diameter on SOL and others... especially with diff muzzle devices?

    • @robertozee5024
      @robertozee5024 2 года назад

      Yeah I'm kinda curious on the tuning of this rifle as well. There's gotta be a buffer change when he shoots suppressed or something.

  • @algoneby
    @algoneby 2 года назад +1

    Choosing teams for battle, where would Caleb be for your picks ?

    • @thefrogking481
      @thefrogking481 2 года назад +1

      A guy worried about rifle colors wouldn't make the cut.

  • @calebsyswerda
    @calebsyswerda 2 года назад

    Where's the anodized blue extended mag release? Really tied the rifle together.

  • @SoulKageSN3
    @SoulKageSN3 Год назад

    Caleb, what is the thought process behind having iron sights and a non QD scope mount?

  • @jasonhensley3071
    @jasonhensley3071 2 года назад +1

    I didn't catch what muzzle device he had on the end of it

  • @Deadleg1-502
    @Deadleg1-502 2 года назад

    Did you shave down the bcm pistol grip under the trigger gaurd? To allow the swing gate to open all the way?

  • @scark00
    @scark00 2 года назад +1

    What is the rifle stand you are using?

  • @El69Fuego
    @El69Fuego 9 месяцев назад

    Why not use canted irons? Didn’t look like you had a QD for scope

  • @slister1911
    @slister1911 2 года назад

    Pretty sure that is not a Troy ambi mag catch unless they just started offering a Norgon clone (Norgon's patents recently expired). More likely its either the CMMG copy, or the (IMO) inferior Arms Unlimited version.

  • @albertptran
    @albertptran 2 года назад

    Love my BCM Grip

  • @johnm2213
    @johnm2213 2 года назад +1

    Where did you get the rifle stand? I’m looking for A.R. 15 and an M & P 10.

    • @jwilsonhandmadeknives2760
      @jwilsonhandmadeknives2760 2 года назад +1

      it looks shop made. If you have tooling available, a great material is Star Board. I use it a lot for making jigs, bench blocks, etc. It’s great stuff that cuts and machines very well and it is inexpensive.

  • @themightiestofbooshes9443
    @themightiestofbooshes9443 2 года назад

    Hey Caleb. I have a similar mag catch on my Anderson lower but it feels a little loosey-goosey. If I try tightening it one more turn, it doesn't look like the mag would be able to come out. Is this normal behavior?
    I haven't tried any magazines yet because it's gonna be an 8x33 Kurz upper on it and I haven't settled on what I'm gonna use as NJ forbids more than 10rds for self-loaders.

    • @stephen_crumley
      @stephen_crumley 2 года назад

      Don’t go off of what it “looks like” will happen. Put mags in it and do some mag changes and see if it functions after being tightened up a full turn or 2. You’d be amazed how tight you can run one and the mag still fall free