Awesome video. I prefer placing my PS5 in horizonal orientation because I heard most people say it's better as highly recommend. I don't know how to explain but I already understand why. It's good you have both original and slim.
The only thing is the new screw is shorter than the OG. With the old console it only goes in so far, then spins after you can’t go any further. It’s snug. But you keep expecting the screw to fully tighten and it doesn’t.
Hi great video, just wondering if it is necessary to get the stand for the slim? Like if it helps with cooling or if it should be fine to just stand it vertical without one? Thanks
I'm not certain about cooling, probably helps some there since it's raised but i think the fans mostly go out the top part. otherwise as long as you don't knock into it then it'll be fine without a stand, but have to be careful not to knock over (such as pets, kids, etc.).
After researching, I've come to find out that having your PS5 Slim vertical w/o the mount does have an impact on ventilation. Definitely stand it vertically with a mount if you don't want to risk damage to your console. Had to get one last minute for Christmas.
@@KaiokenChampionbro I just got a ps5 slim and have this ready to purchase but thanks to your comment I now know I definitely need it, as I am also having issue with overheating as well.
Never mind so I figured it out I had the cap stored in the wrong hole I had it in the square/X instead of circle/triangle. This is only done if you are using the older consoles other than the slim in which I have it snaps it place perfectly. Also side note if you are using the stand for the older model you must use the additional base to fit the older ones. Then you would reverse what I said ⬆️ moving along if you have the slim you turn the base till it is securely in place then screw it in square/x. I hope this help. This is many of our misunderstanding. Me as a person love to help people and I figured it out. Hope this helps you all who are having this problem. I answered my own question and it is now right. 😀Happy Holidays & more importantly God bless you all!
Still works but would easily fall over if you hit it accidentally. Stand slightly raises it too and that may be better for ventilation, but not certain
I'll be pre-ordering a "slim" in a few days. Shame that we all have to pay for a separate vertical stand Sony could have easily included it. And can you ask me this - does this Slim in your eyes have a better, more efficient cooling system than the OG??
I'm not sure in terms of temperature but the Slim disc drive also gets pretty loud at times so I'm not sure if it's better. The design though does look better in person and is noticeably smaller.
i got my stand used off ebay for $14 i thought what a deal and it was but unfortunately it didn't come with that other cover for the og ps5 installation.
Unless if you bought it second hand and it didn't come with the original one, I honestly don't see anyone using the PS5 Slim's vertical stand on the original PS5.
I don't believe so since I think the ventilation is on top. Without this the PS5 would be flat against the floor but this elevates it so has to be better
But you are covering the ventilation holes with the base, right? I'm not sure whether to buy it or not and no one says anything about this, greetings, thank you.
Vertical Stand for PS5 Amazon US price (affiliate): amzn.to/3QCshfk
Finally someone who got straight to the point. I didn't understand why the stand wasn't working & had no idea there were 2💀 This was helpful!
Same here. More helpful then the instruction book
Great explanation! I thought we need both pieces for the PS5 Slim. Thanks for your video.
same until i put the piece on and realized it covered the screw hole 😭
What was the blood point on the other piece? The manual tells you to add it and It doesn’t go on slim ps5 until you remove it. Why is it there?
I thought I was crazy, I knew something wasn’t adding up attaching mine
@@zexionienzo4183same that’s why I came here 😭
@@keepitcleandon1659 I chucked it straight in the trash
@@zexionienzo4183 😂😂
It’s for usage with the OG PS5
"It's easy to miss" is facts
Thank you! Honestly the video makes it much easier than the instructions sheet in the box 🙏
Thanks for the video! Lol I thought you need both pieces for the slim!
Awesome video. I prefer placing my PS5 in horizonal orientation because I heard most people say it's better as highly recommend. I don't know how to explain but I already understand why. It's good you have both original and slim.
Thanks dude. Great help! 🤘😀🤘
Could also put the little cap between the PS5 and stand as it can come out easily
Thanks for the explanation
The only thing is the new screw is shorter than the OG. With the old console it only goes in so far, then spins after you can’t go any further. It’s snug. But you keep expecting the screw to fully tighten and it doesn’t.
Simple,use old screw for new stand 😊
Mine seems to go all the way in. Doesn’t spin anymore
You wouldn’t believe all the different ways I tried to remove the little cap that is placed in the console originally.
My skim wiggles a little bit with the stand. The stand is still but the ps5 slim moves just slight. Is that normal?
Hi great video, just wondering if it is necessary to get the stand for the slim? Like if it helps with cooling or if it should be fine to just stand it vertical without one? Thanks
I'm not certain about cooling, probably helps some there since it's raised but i think the fans mostly go out the top part. otherwise as long as you don't knock into it then it'll be fine without a stand, but have to be careful not to knock over (such as pets, kids, etc.).
After researching, I've come to find out that having your PS5 Slim vertical w/o the mount does have an impact on ventilation. Definitely stand it vertically with a mount if you don't want to risk damage to your console. Had to get one last minute for Christmas.
@@KaiokenChampionbro I just got a ps5 slim and have this ready to purchase but thanks to your comment I now know I definitely need it, as I am also having issue with overheating as well.
@@KaiokenChampion Thanks a lot for the tip. I was actually asking myself if I needed to go to buy this mount. And I will do.
Did you buy it? And did the overheating problem stop? Cuz it just came to my mind that the stand itself also blocks the ventilation 😅 @dxtrro6939
So the 2nd plastic is only for the fat model
correct
Thanks for the vid. You just gained a new sub 😀very informative vid.
I had one question do the two tabs on the part that goes to the PS5 are those suppose to snap in the bottom vent holes on the slim?
Never mind so I figured it out I had the cap stored in the wrong hole I had it in the square/X instead of circle/triangle. This is only done if you are using the older consoles other than the slim in which I have it snaps it place perfectly. Also side note if you are using the stand for the older model you must use the additional base to fit the older ones. Then you would reverse what I said ⬆️ moving along if you have the slim you turn the base till it is securely in place then screw it in square/x. I hope this help. This is many of our misunderstanding. Me as a person love to help people and I figured it out. Hope this helps you all who are having this problem. I answered my own question and it is now right. 😀Happy Holidays & more importantly God bless you all!
glad you figured that out - and thanks for subscribing!
@@techtips NP you’re welcome!
Does it work with the regular ps5 the one without the disc
What happens if I’m using my ps5 slim in vertical mode without the stand? 🤔
Still works but would easily fall over if you hit it accidentally. Stand slightly raises it too and that may be better for ventilation, but not certain
@@techtipsthat’s why a vertical stand is recommended to have no incident on the ps5 if it accidentally fell over
Hi! Can any1 tell me the diameter of the vertical base for the ps5 slim?
Does the slim version doesn’t come with the vertical stand?
Does anything happen if I put it vertically without the support?
I am wondering too...but i think horizontal is the best position...they are cooler output on the bottom thats why
I'll be pre-ordering a "slim" in a few days. Shame that we all have to pay for a separate vertical stand Sony could have easily included it. And can you ask me this - does this Slim in your eyes have a better, more efficient cooling system than the OG??
I'm not sure in terms of temperature but the Slim disc drive also gets pretty loud at times so I'm not sure if it's better. The design though does look better in person and is noticeably smaller.
@@techtips Thankyou for your findings👍👍
why you don t need both pieces for ps5 slim?
I didnt find a screw..? Is this a problem?
did you buy it new or used? should be in the box.
i got my stand used off ebay for $14 i thought what a deal and it was but unfortunately it didn't come with that other cover for the og ps5 installation.
that's rough, I'm guessing they're selling that separately.
@@techtips prob i mean im not really upset cause i own the slim it's just the matter of the fact though if i ever get an og one.
Thank you so much I appreciate it❤❤❤
Does an OG PS5 stand fit the Slim version? I want a buy it from a dude on marketplace, $5 bucks only.
Thanks this helped me out.
Mine does not sit flush and does not feel that stable
Perfect explanation
Thanks you bro,I just follow your video,IT's perfect.
Unless if you bought it second hand and it didn't come with the original one, I honestly don't see anyone using the PS5 Slim's vertical stand on the original PS5.
Do you think you could use the old PS5 stand on the PS5 Slim for horizontal mode?
No I've tried that doesn't fit
@@techtips do you think the PS5 Slim would still be stable if you only used one (back) of the horizontal stands? The front one looks so bad…
Thank you!
Thanks for this 👍🏻
Good job 👏🏾
But with this you block vent holes🤔
no it's the opposite, without the stand the PS5 is flat on the ground so everything is covered. with the stand it's raised like half a centimeter.
@@techtips Tnx for info…so it is a must have … will 3d print it today 💪💪
God bless you brother
Thanks fr . I wanted da all Black one But this would do
my dumbass placed the cap on the wrong hole. i can't believe i need a tutorial for this.
Muchísimas gracias, muy bien explicado. Thank you!! 👏👏👏
thanks. I didn't know I had to buy sth I don't need
I just got one from GameStop for my og PS5
Hello, the support does not cover the ventilation?
I don't believe so since I think the ventilation is on top. Without this the PS5 would be flat against the floor but this elevates it so has to be better
But you are covering the ventilation holes with the base, right? I'm not sure whether to buy it or not and no one says anything about this, greetings, thank you.
Did you end up buying it or finding an answer to that question? Cuz am wondering the same
the other one
won't fit my PS5
Muchísimas gracias 😊
Is this stand metal or plastic?
Metal
Thanks 🙏
Thank you
Thx
Like if you also threw away the box with the screw in it😅
Luckily my trashbag was still at my front door with only carton boxes in it.
seriously the box was hard to open without ripping appart 😂😂
Almost did until I saw the instructions last minute😅
I was on a wrong hole 1 month 💀😫
gracias
Comprei um na Shopee por 30 reais igualzinho a este suporte. So que é todo preto. Ai usei este manual para instalar 😂
Estos videos son la luz
Спасибо, Бро!!!
Thanks 😂
Waste of money if you have the disc version. If you have the disc version, it stands perfectly fine without it.
If you needed this video to put a stand on... I dont know how you made it this far in life so far.
lol the video is more about the fact that you need to buy a separate stand since the original PS5 came with a stand for both horizontal/vertical.
there's 2 holes though on that stand, you know some people want to avoid making mistake like i do
Your clicked on the video 🍆 head
👍
Thanks!!