What an amazing job you did. I just told my wife, I can’t see any Apple repairman taking as much caution and care as you did on that repair. And I’m really happy I didn’t attempt it. Glad I found you. Can’t wait to get my watch back. Haha. Thx again!
Thank you for your videos and knowledge on Apple watches on how to fix them properly. Thanks to you I got into it and now I’m buying broken watches and selling them and loving it. Thanks again
Thank you so much for this video! I am trying to learn from you personally so that I can do this as well. I’ve bought all the tools necessary for it and have a few Apple Watch screens I got to practice on too before I work with difficult displays. Wish me luck, and hopefully I can do this to refurbish devices!
I want to attempt this with my wife’s watch. Was wondering after everything when you are putting the display back into the case, do you use an adhesive or just put in into the frame?
@@FIXDPHONES Thanks just saw it. My wife's Apple Watch is cracked in two places, but most of the edge of the screen is in tact... any advice on how to get the screen off? should I chip away at the cracks or go around the sides with a ton piece of plastic?
Does the digitizer on the ebay or market work on apple watch? Bcs some youtube fix videos says the digitizer is programmed by apple. So based on yr experience, will it work if the digitizer purchased online from non apple supplier? Thanks in advance for the replies.
Nice video you explain everything very well.i do have an question related with apple watch s3 as i recently changed the digitalizer but for weird reason the force touch doesn't work but the force touch sensor is just fine.
Great video, I know from exp, series 4 is a bit tricky compared to the series 3, my only problem is getting like one dust particle in the display, then I have to start all over 😭. 😁
Hey mate great video, I’m just wondering, does the copper sticky back that covers the 3 connectors need to be replaced? Is it an Ariel on the series 4 44mm cellular? I tore mine by mistake and can’t find replacement part?
nice video. I have a iwatch 4 / 40mm with damaged glass and lcd screen.I will order the parts.The watch is on I can't shut it down because i can't read the screen. Is it safe to replaced it while is on ?
Hey man, could you provide some tips on how to replace the glass successfully? I have a Series 4 that I recently pull the cracked glass off successfully but after using minimal amount of OCA on it to bond them together, the screen is not flickering red and green. Wondering what would be the cause of that. It's really demotivating when this occurs despite me trying my best to not have that occur. Thanks man, hope to hear from you soon.
I replace the screen of mine watch4 44mm, i put the new screen but no image on screen, but i have vibration, when i put the old screen now i have the same, i reemplace the touch force too, what could be the problem??? :S:S:S
Hi! congratulations for the great videos! I would like to ask you for advice ... which glue do you suggest to use? between loca tp-1000 and tp-2500 which is preferable? Thank you and have a good day!
Do you offer screen refurbishing service on an OEM iPhone X screen? If so what would be the price. I just need the front glass replaced but would I be able to send in just the screen?
What an amazing job you did. I just told my wife, I can’t see any Apple repairman taking as much caution and care as you did on that repair. And I’m really happy I didn’t attempt it.
Glad I found you. Can’t wait to get my watch back. Haha. Thx again!
Mark Leonard thanks Mark
Hi Mark, I am working with Fixd as well. How was your experience in getting the glass fixed on your Apple Watch 4?
Just want to say, I had this done (last week) and the watch came back in 3 days and so far everything is working great. Thank you FIXD
Does the watch still being water resistant?
Thank you for your videos and knowledge on Apple watches on how to fix them properly. Thanks to you I got into it and now I’m buying broken watches and selling them and loving it. Thanks again
Thank you so much for this video! I am trying to learn from you personally so that I can do this as well. I’ve bought all the tools necessary for it and have a few Apple Watch screens I got to practice on too before I work with difficult displays. Wish me luck, and hopefully I can do this to refurbish devices!
Do you have a video showing how to replace the battery for a series 4 Apple Watch?
great job! Waited for this video 4 watch apple series!
Excellent video bro 👌
Very helpful video and channel. Thanks FIXD.
I would love to get a price list if possible of all apple devices
Where do you buy the glass for replacement?
I can only find it on ebay but I'll update you if I see anything
Elias McCoy thanks man!
Hi I have a question. What is the difference between the digitizer and the front cover glass?
I want to attempt this with my wife’s watch. Was wondering after everything when you are putting the display back into the case, do you use an adhesive or just put in into the frame?
Caleb Lee watch my new video on the series 5 and see how I adhere it
@@FIXDPHONES Thanks just saw it. My wife's Apple Watch is cracked in two places, but most of the edge of the screen is in tact... any advice on how to get the screen off? should I chip away at the cracks or go around the sides with a ton piece of plastic?
Does the digitizer on the ebay or market work on apple watch? Bcs some youtube fix videos says the digitizer is programmed by apple.
So based on yr experience, will it work if the digitizer purchased online from non apple supplier?
Thanks in advance for the replies.
Nice video you explain everything very well.i do have an question related with apple watch s3 as i recently changed the digitalizer but for weird reason the force touch doesn't work but the force touch sensor is just fine.
Great video, I know from exp, series 4 is a bit tricky compared to the series 3, my only problem is getting like one dust particle in the display, then I have to start all over 😭. 😁
Hey mate great video, I’m just wondering, does the copper sticky back that covers the 3 connectors need to be replaced? Is it an Ariel on the series 4 44mm cellular? I tore mine by mistake and can’t find replacement part?
it helps ground the screen, but isn't completely necessary.
You’re awesome man!
hello, I hope you are well I would like to know if you can share the link to buy the watch viewer, i’m in Colombia
nice video. I have a iwatch 4 / 40mm with damaged glass and lcd screen.I will order the parts.The watch is on I can't shut it down because i can't read the screen. Is it safe to replaced it while is on ?
yes, you may have to hold the crown and power button together for 10 seconds if it doesn't turn on right after the screen repair.
Hi, after fixing does the watch lose the water resistance properties?
Lukas Taves yes it does
I cracked my watch! Series 4, How do I reach out to get mine fixed??
hi can you fix my iwatch 4, cracked glass
alan swain email me at fixdirepair@gmail.com
Fixdphones@gmail.com
Hey man, could you provide some tips on how to replace the glass successfully? I have a Series 4 that I recently pull the cracked glass off successfully but after using minimal amount of OCA on it to bond them together, the screen is not flickering red and green. Wondering what would be the cause of that. It's really demotivating when this occurs despite me trying my best to not have that occur. Thanks man, hope to hear from you soon.
I replace the screen of mine watch4 44mm, i put the new screen but no image on screen, but i have vibration, when i put the old screen now i have the same, i reemplace the touch force too, what could be the problem??? :S:S:S
Hey my Apple Watch is Series 4 is broken and can you please fix it
This dude charges almost 200$ for a screen repair not worth it just buy a new one
Hi! congratulations for the great videos! I would like to ask you for advice ... which glue do you suggest to use? between loca tp-1000 and tp-2500 which is preferable? Thank you and have a good day!
This will probably answer your question: ruclips.net/video/c_MI-7_tfbA/видео.html
I need help with my Apple Watch series 4
The important thing after all this is whether you tried to enter it in a glass of water or immersed in water for a while and what happened to it
Good work bro!
Vadym Ilnytskyi thanks!!
Do you offer screen refurbishing service on an OEM iPhone X screen? If so what would be the price. I just need the front glass replaced but would I be able to send in just the screen?
WillOnDaTrack sorry I don’t do that mail in service yet.
Where can I get a plate to remove the glass?
Check the video Description
Where can i find glaas
Hi
How do I go about having you fix my watch? How can I contact you?
David Hayes it’s best to contact me via email at fixdirepair@gmail.com I hope to hear from you soon. Thanks
I have s4 and glass broke can you contact me i need you fix how much
@FIXD the reviews on the heat plate are terrible. what you think?
Would you repair my Series 4 screen? I am from Germany, is that possible ?
Damn, should have sent it to you. Damaged the lcd trying to remove the glass.
Can u fix my iwatch 4 44mm, my glass is cracked and How much that? Thx before
check out my website for prices and shipping info www.fixdirepair.com
Do you have a website
Peyton Burns yes fixdirepair.com
Boa tarde! Ele fica resistente a respingos e poeira ?
Viana Odontotec sim, com o melhor das minhas habilidades.
eu selar de uma maneira especial
Gosto muito de assistir seu trabalho, aprendo muito com seu vídeos.
Consegue fazer um vídeo e postar no canal de como selar de uma maneira especial, para ele voltar com resistência à água e poeira?
Hi, do you have fellows in Germany?
Its AMAZING!!!!I NEED HELPPPPP!! :(
I had the same terrible experience as well! Im looking forward to have my watch repaired! huehuehue FIXD please help me :(
Glass price?
Karthick Pabks feel free to email me at fixdirepair@gmail.com for details and shipping information.
can u fix my apple watch series 4 40mm
Visit my website for details fixdirepair.com
ö
I sent you a email really interested in getting a repair done
Can I ask something? Why the fuck is it so expensive???
charging under 1000 for this repair seems kinda like ripping yourself off