Which boat is faster? F1 Powerboat vs. Mono hull. 6S brushless boat battle!
HTML-код
- Опубликовано: 10 сен 2024
- 2 different RC boats running head to head. Different hulls, different setup. Both great fun!
Arrow Shark mono:
Length ca 900mm
6S 6200mAh
4074 2000kV
Flycolor 150A
43mm 1.6 prop
Weight ca 3500 gr.
Cozy F1 T800:
Length 835mm
6S 5200mAh
3674 1650kV
Turnigy Marine 120A
43mm 1.6 prop
Weight ca 3100 gr.
What kind of RC boat hull do you like most?
You know I like vhulls 😊 but your F1 run on rails on that water👌
I like that you have friends to run yours boats together 🤗
@@daiciuapostol79 Yes I know, and I love them too 😉.
The T800 runs pretty stable indeed! It is a bit short on power, compared to the Arrow Shark. That boat runs the same setup as my Wildthing.
Hopefully at the meeting, we can run the Arrow Shark together with the G-Force. I'm currently painting it. I will make a video about that too, of course 😎✌️
Both hulls are awesome to run the mono has more flexibility for rougher water conditions the tunnels are pure fun
@boatwerks You're right, it was great fun!
Like the f1 for its looks and characteristics, but... A mono has my preference (leaning in the corners, sound rpm) and then a cat... But also has bit to do with conditions you can run them.
The high rpm setup of the mono sounds good and it runs more aggressive. The F1 Tunnel runs more efficient, with a lower kV setup, but the same top speed (and we ran the same props). They're both great fun 😎
I would like to see you run laps together or line them up and drag race them. And hold your lanes. Too many close calls where one or the other let off to avoid a wreck. Maybe something to think about for next time. Looked like great fun either way, I'll bet it got your knees knocking!
You're right Sam. This pond has a triangle shape and a stone wall, where it is risky to go full throttle at the back straight. The mono driver never ran there before, and we were careful not to collide.
At the beginning of April, we hope to run on a much bigger pond at the Dutch RC Powerboats event. I will bring the G-Force twin as well. It's currently getting a paint job.
@@CozyRC Be awesome to see it with paint! Cheers!
Bytheway what brand is the arrow shark. I like it's shape.
It's an old hull, and the brand seems to be Arrow Shark. On the sides it mentions in small letters 'Dragon Fly' . That's where I got that name from in the video 😉
the mono is better 👍👋
The second run, the mono used an even more powerful battery. It was definitely faster, and it corners well too!
Mir gefällt der Mono besser 👍👋
👍 The bigger motor and high rpm setup make it spectacular!
❤❤❤
Thanks, I look forward seeing your F1 Tunnel on the water 👍
@@CozyRC please wait patiently, it's rainy season where is am... 🙏
Tunnel!
Tunnels look awesome on the water 😎 . I also love the way they float a above the water, when properly setup, and in smooth water 👌
@CozyRC Hi there. Great vid once again. Just showed my wife. She's still joking with me that after 6 months, at least 9 fully printed boats, a couple of grand in materials and I'm yet to get a single boat and motor of mine to reliability work for more than 1 min. She has a point. So... my 1/8 scale printed moulds seem to be working. Also did a test with silicone moulds. They seems to work OK for small concave parts, such as engine covers. Now waiting for some tool cast mould epoxy, from the Netherlands 🇳🇱 😀, to go about my 1/5 tunnel hull.
@NoMatterDesign A fast RC boat will experience huge stresses. Strength is absolutely required, as you've found out. I hope your moldings will turn out great! With Dutch products, I'm sure it will 😉
Both😂😉👌
I agree! They are both a blast to run 😎
Hi DJ Thanks for sharing, we did had great fun together this Friday. The Arrow Shark was very fast, powerful and bit more stable with my new Lipo 6S CHNL 6200mAh / 950gr.. Although the difference in weight with my previous Lipo 5000mAh / 800gr. from the same brand.
More about the transformation from the Arrow Shark see:
ruclips.net/video/hdY4GY6HK4c/видео.htmlsi=46ABytInBsehDWjt
See you in Hank again.