Manual transmission overview in under one minute - Part 1
HTML-код
- Опубликовано: 13 июл 2022
- The ConsuLab EC-1120 is a working system of actual, new components so that students can visualize the actual operation.
Some of the highlights of this trainer include:
• Total visibility of all clutch components without the limitations of working under a vehicle.
• Takes the mystery out of clutch operation.
• Sits on a bench or tabletop to allow more student access and visibility of operation.
Made with Honda clutch components.
Applicable ASE Education Foundation (NATEF) tasks:
Diagnose clutch noise, binding, slippage, pulsation, and chatter; determine needed action.
Inspect clutch pedal linkage, cables, automatic adjuster mechanisms, brackets, bushings, pivots, and springs; perform needed action.
Inspect and/or replace clutch pressure plate assembly, clutch disc, release (throw-out) bearing, linkage, and pilot bearing/bushing (as applicable).
Bleed clutch hydraulic system.
Check and adjust clutch master cylinder fluid level; check for leaks; use proper fluid type per manufacturer specification.
Inspect flywheel and ring gear for wear, cracks, and discoloration; determine needed action.
Measure flywheel runout and crankshaft end play; determine needed action.
More information: www.consulab.com
Great set ups for demonstrations. Nothing better than actually seeing how things work. Cutaways and models are the best for teaching.
Love the little hydraulic clutch set up with reservoir and all ❤😂
Great way to explain it. Much appreciated ❤
Excellent 👍🏻
why pressing the clutch make a boat motor type noise? only when driving
Awesome "
I understand the process. There's more to it also.
No pun intended but this explanation is clutch
Just send them to the uk for 2 weeks😂
So applying clutch first during braking is best!!?
Buddy forgot the clutch cable mine just got sent to heaven two days ago
Show us what would happen if you put the clutch disc in backwards
Not all are like that. Iirc i think most are separated. But i could be wrong.
How does the pressure plate disconnect from the flywheel if it is bolted to the flywheel?
That's a clutch.
I,m interested please provide
More like a "operation of the clutch in under one minute".
❤❤😅😅😮
ohh
It's better if it's long. Not just a second