Thanks so much. The step I was stuck on was how to assemble the large round metal ring onto the plastic. One thing that was difficult was snapping the plastic assembly onto the nozzle of the inner rubber disk.
+Dan Pinson thanks for the socket tip! i kept assembling it, and taking it back apart because the handle didnt snap back...the rubber wasnt all the way through the plastic assembly.
Great video! Oddly enough I had the same problem as the top comment... I put back the spring several times, would line up the indents and click everything into place but the plastic with the valve would pop out. On my last try, instead of lining up the plastic valve to all the holes in the stainless steel piece, I shifted it to the left, (so not all lined up with the holes/indents) so only 2 holes are lined up and so far so good, works as good as new. go figure.
Hi, great 100% explanatory video, I wanted to ask you where to find the spare parts for the arm of the gaggia style (exactly the same as the one shown in the video. I subscribed to your channel and liked it.
Hi! Thank you for your video. Could yo tell me de type and size of the very fine wire shown in the firts picture, not the one with the loop. Thank you! I’ve lost it!
Hi Miro. Without even realizing it, I used your video to replace used portafilter with the kit I received today - Searched RUclips and your vid was the best. Me not noticing who had made the video. Everything went well. Now it is two hours later. Went shopping etc. etc., came back on Internet and got to visit Sophia, typed your name haphazardly and here you are. I am happy that you showed me 'personally' how to do the repair job. It was nice being in contact with you. Our first coffee will be for your and yhour family ! Cheers from Eastern Canada :-)
Just to make sure I got this right - the rubber valve plate ring is placed with the taller side towards the basket, or towards the holder (because the video is a bit blurry, I couldn't make it out clearly)? Placing it teh wrong way would position the valve plate differently and change the valve opening pressure...
Thanks Moro. The video is very instructive. But still I have a question this portafilter is affecting the espresso quality or not? Because when I open it it gives no crema at all, for second trial of open the portafilter and reassemble it it’s stucked.
What’s the purpose of the handle that is spring loaded and wiggles back-and-forth several degrees? Before replacing my original portafilter(Estro Vapore-predecessor to Starbucks Barista) that handle didn’t spring back. You kept the handle to the right until the pressure built up and the motor tone changed pitch. Then you move the handle to the left to allow the espresso to flow out. I don’t understand the purpose of the spring loaded handle in this current portafilter. As it’s designed it always springs back to the left. I tried holding it to the right, but that did not prevent espresso from flowing out.Thanks.
You can find whole here: www.ebay.com/itm/Saeco-Parts-Full-Repair-Kit-for-Pressurized-Portafilter-/400775821203?rd=1 or in my eBay store: stores.ebay.com/miro1976
I got just the large plastic pin support and small cam spring - that's all I needed - from Phillips directly. If you need parts for the Poemia, this is a great source: www.buyphilipsparts.com/model/SAEHD8325|47/_/_/Saeco/HD8325|47/Saeco_Poemia_Manual_Espresso_Machine_Class
First you need to install the mechanism with the valve in the body, and then insert the plate. This is much easier to do and there is no risk of breaking the mechanism.
hey. My portafilter handle broke. It still works, I just have to grab the filter part directly to screw it in or remove it. No easy task when it pipping hot. Anyone know if there's a way to get JUST the plastic exterior+ handle for a Saeco Via Venezia portafilter?? Didn't really want to spend $60 on a whole new one when all I need is the plastic frame. ie. in this video at 3:00, the part on the table framed between his wrists.
MUY BIEN HASTA QUE EL MINUTO 4,37 SE METE LA PATA .... PUES NO SE VE SI ES UN A PESTAÑAM, O DONDE Y COMO, DE AHI HASTA QUE CIERRA... SE CARGA PARA MI LA ENSEÑANZA.
at 3:00 to 3:15 the video is deceptive as regards the amount of force that needs to be applied to seat the white plastic device into the holder. see ruclips.net/video/MCf_zOEXOPY/видео.html at ~7:00 for a more useful guide how to get it to seat.
Thanks a lot! There are so many small but crucial details to correctly assemble the portafilter. Very helpful video!
Thank a lot!...I dissasembled this portafilter to clean and since 2 month haven´t assembled...today I did it and is working again
Thanks for explicit video Made assembly easy
Thank you for posting this! I have amazing espresso again!
Grazie per il video postato, mi stavo impazzando a montare la molla di torsione, ma grazie a te è stato tutto semplice.
Много ми беше полезен, благодаря !
Thanks brother, very cool. Now I can enjoy some espresso.
exactly what i needed, thanks
Not difficult but thanks.. it help just for info for the disassembly, with this change i can save some money
Thanks so much. The step I was stuck on was how to assemble the large round metal ring onto the plastic. One thing that was difficult was snapping the plastic assembly onto the nozzle of the inner rubber disk.
+Dan Pinson thanks for the socket tip! i kept assembling it, and taking it back apart because the handle didnt snap back...the rubber wasnt all the way through the plastic assembly.
that step takes a bit of force and I was afraid to hurt the assembly
7 years later and I was stuck in this exact step, thank you so much for the video and the comments!
Благодаря ти Миро, и на мен ми помогна. Трябва да взема и да имам комплекта части след време от твоята страница. Приятен ден
+Volodya Hristov
Винаги сте добре дошъл, радвам се, че успявам да помогна на хората по някакъв начин. :)
Great video! Oddly enough I had the same problem as the top comment...
I put back the spring several times, would line up the indents and click everything into place but the plastic with the valve would pop out.
On my last try, instead of lining up the plastic valve to all the holes in the stainless steel piece, I shifted it to the left, (so not all lined up with the holes/indents) so only 2 holes are lined up and so far so good, works as good as new. go figure.
Grazieeee 🤗
Thank you. Very use-full and well done video8
Thank you so much, it was/is a very big help!!
Thanks! this video helped me a lot
Almost the best video ever.
You are the best, many thanks
FANTÁSTICO! Justo lo que necesitaba. Gracias!
Thank you!!! You saved my day :)
Thank you very much, you just saved my day
grazie per il tuo video , ho salvato la mia gaggia !!!
Very helpful thanks!!
grazie Miroslav l'ho sistemato!!!
thank you~!
Thanks a lot, helpful movie.
Merci beaucoup, j'ai pu réparer ma cafetière qui n'avait pas servie depuis longtemps
Σ ευχαριστώ πολύ αδερφέ!!! Μ έσωσες...
Thanks A lot! quick question. Im missing one of the three screws on the bottom. Is it going to affect the functionality?
thanks!
you save my pormia je.. je... !!! Thank you
Thanks a lot!!!
Great... Thank so much 😉👍
Gracias, excelente.
excelente . gracias
Hi, great 100% explanatory video, I wanted to ask you where to find the spare parts for the arm of the gaggia style (exactly the same as the one shown in the video. I subscribed to your channel and liked it.
Hi! Thank you for your video. Could yo tell me de type and size of the very fine wire shown in the firts picture, not the one with the loop. Thank you! I’ve lost it!
Hi Miro. Without even realizing it, I used your video to replace used portafilter with the kit I received today - Searched RUclips and your vid was the best. Me not noticing who had made the video. Everything went well. Now it is two hours later. Went shopping etc. etc., came back on Internet and got to visit Sophia, typed your name haphazardly and here you are. I am happy that you showed me 'personally' how to do the repair job. It was nice being in contact with you. Our first coffee will be for your and yhour family ! Cheers from Eastern Canada :-)
Just to make sure I got this right - the rubber valve plate ring is placed with the taller side towards the basket, or towards the holder (because the video is a bit blurry, I couldn't make it out clearly)? Placing it teh wrong way would position the valve plate differently and change the valve opening pressure...
thick side up, toward basket
Thanks Moro. The video is very instructive. But still I have a question this portafilter is affecting the espresso quality or not? Because when I open it it gives no crema at all, for second trial of open the portafilter and reassemble it it’s stucked.
if the coffe stuck take a look at the spring
Thank you very much. I was going crazy.😆
Any ideas on why coffee would be pouring out of the 3 holes where the screws are? I can imagine it could be that the valve gets stuck. But otherwise?
Thank you
Thank you❤
super video
What’s the purpose of the handle that is spring loaded and wiggles back-and-forth several degrees? Before replacing my original portafilter(Estro Vapore-predecessor to Starbucks Barista) that handle didn’t spring back. You kept the handle to the right until the pressure built up and the motor tone changed pitch. Then you move the handle to the left to allow the espresso to flow out. I don’t understand the purpose of the spring loaded handle in this current portafilter. As it’s designed it always springs back to the left. I tried holding it to the right, but that did not prevent espresso from flowing out.Thanks.
Great video and very helpful.where can i buy the reparation kit from, please?
Great video,I need the little spring, first one you installed. Where can I get one . Thanks
You can find whole here:
www.ebay.com/itm/Saeco-Parts-Full-Repair-Kit-for-Pressurized-Portafilter-/400775821203?rd=1
or in my eBay store:
stores.ebay.com/miro1976
I got just the large plastic pin support and small cam spring - that's all I needed - from Phillips directly. If you need parts for the Poemia, this is a great source: www.buyphilipsparts.com/model/SAEHD8325|47/_/_/Saeco/HD8325|47/Saeco_Poemia_Manual_Espresso_Machine_Class
First you need to install the mechanism with the valve in the body, and then insert the plate. This is much easier to do and there is no risk of breaking the mechanism.
hey. My portafilter handle broke. It still works, I just have to grab the filter part directly to screw it in or remove it. No easy task when it pipping hot. Anyone know if there's a way to get JUST the plastic exterior+ handle for a Saeco Via Venezia portafilter?? Didn't really want to spend $60 on a whole new one when all I need is the plastic frame. ie. in this video at 3:00, the part on the table framed between his wrists.
Can I make this into a non pressurized portafilter my just reinserting the small wire around the top and leaving everything else out?
Hi sorry, but I forgot to tell you that I live in Italy, you know where to find arm spares in Italy. Hello and Thanks again
Ola , por favor el alambre que va donde se echa el café , como va , ?
Gracias saludos
02:35.. the mistery solved!! ...blagodaram
What is the name of just the white plastic piece?
Anyway to reverse if I accidentally used Cafiza and caused the metal part became oxidized.
das good bro
what symptoms would require repairing Saeco Pressurized Portafilter?
MUY BIEN HASTA QUE EL MINUTO 4,37 SE METE LA PATA .... PUES NO SE VE SI ES UN A PESTAÑAM, O DONDE Y COMO, DE AHI HASTA QUE CIERRA... SE CARGA PARA MI LA ENSEÑANZA.
Grazie mie stato utile o risparmiato 25 euro 😁
OU TROUVER CE KIT MERCI
at 3:00 to 3:15 the video is deceptive as regards the amount of force that needs to be applied to seat the white plastic device into the holder.
see ruclips.net/video/MCf_zOEXOPY/видео.html at ~7:00 for a more useful guide how to get it to seat.
Donde puedo comprar la válvula blanca del portafiltros
coffeesection on Amazon.com has some kits
Where to buy parts??
coffeesection on Amazon.com has some kits
3:11 why does it go on so easily mine doesn't at all
Buongiorno,io non riesco a inserire la valvola nera nella ghiera bianca, qualcuno può aiutarmi? Grazie
Just take it out, pressurized portafilters are SHIT.
Excellent video, good explanation. but unfortunately here in Argentina you can't get the parts🥲🥲