Thank you so much for this! This was clear, to the point and very helpful. Encountered exactly this problem in my sister's C1. Followed your steps, fixed within 10 mins. Thanks again!!!
@@StupidBlokeStupidVideos it helped for a day and then it blew again, fitted a brand new one ( last one was the one from under the hood, figured it might be old ) so gonna see what this does. Any idea what might be happening if it blows again? What parts of the car should I check in that case?
@@jamesbond9011 you’ll have a short somewhere on your lights. Have you changed any bulbs recently, or fitted LED bulbs behind the heater panel? This is a favourite for blowing the fuse on these.
@@StupidBlokeStupidVideos really appreciate the time you take to react dude! I haven't checked the lights. If it happens again I'll be sure to do that!
@@jamesbond9011 no problem. Bad bulbs can cause it but it’s unlikely. The wrong bulb in the holder can too. Other than that, wiring for the side lights shorting to ground anywhere on the car. Bad wiring, damage to plugs or bulb holders or even Lights full of water etc
Great advice to check aftermarket LEDs first!🏆 EBay bonnet strip light packed up on mine!💩 7.5 amp fuse kept blowing until I disconnected it! Thanks for the video 🍻🏅
Great advice to check aftermarket LEDs first!🏆 EBay bonnet strip light packed up on mine!💩 7.5 amp fuse kept blowing until I disconnected it! Thanks for the video 🍻🏅
At the back of the rev counter stalk is a screw which if you loosen it (it's a bugger to get to though) will allow the rev counter to move higher and gives more room to remove the cowl.
If I’ve still got this problem and changing the fuse doesn’t help, what do you think could be wrong with the car? Is it an easy fix? Thanks in advance!
@@emmacowdell5945 could be the light switch on the indicator stalk. Double check the other fuses though as on some models they are in slightly different places
@@mhus1720 it means your new bulbs are drawing too much power than is safe to be supplied. If you really want LEDs you need to find LEDs that pull the same watts as the old bulbs.
I was wondering if it’s possible to fit another car steering wheel (a vw one for example, the newly designed one with a flat line bottom instead of fully circular ones) into my c1. Do you think this is achievable? Besides it’s cost of course, is there going to be any other major problem in your opinion?
Do you know how to fix low beams not working on peugeot 107? All my lights are working except the low beams, all fuses are fine and I've changed the stalk switch also
@@staceyryan7317 it’s not something as simple as the plugs on the back of the bulbs is it? Have you checked the relay? Is it clicking when you turn the lights on?
@StupidBlokeStupidVideos thank you very much, if im right there's a seperate relay for the low beams and high beams, it's the relay for the low beams I'm looking for
Ehhh is that 3 this week ? Had some free time ??? Wish i had easy jobs like this ! Ive just had to drill out a bolt and angle grind off a head on the merc handbrake tree, adapt something and fit back ! Jobs on plastic and fuses are more straight forward than working on rusted old metal parts 🤣
Oh don’t worry I do my fair share of that kind of shit too haha. I just had a bit of a backlog of video’s that needed releasing before I can get onto newer ones I’ve filmed, but they were too short for a Saturday slot so fired them out at once 😆
Hi mate! I had same problem. Changed the fuse, everybody happy but when i stop the car and start the car again the problem is here again. Something wire problem?
Hi mate my Peugeot 107 has a problem When i switch on the parking lights or head lights the lights in the dashboard are not working and the speedometer is also not working if i switch off the lights they are working fine can you please help me with the solution
Double time on a Sunday , and a day off in lieu .. Win win. Like your new friend Joyce ,,, he was more loose loose ,,, Friend of mine did the whole male to female sex change thing ,,, and after a chat he said it was actually very painful it wasnt getting the dangly bits removed the painful bit was having his brain shrunk ,,, and his mouth widened ,,, 🤣🤣
Thank you so much for this! This was clear, to the point and very helpful. Encountered exactly this problem in my sister's C1. Followed your steps, fixed within 10 mins. Thanks again!!!
YES. Happy it helped
@@StupidBlokeStupidVideos it helped for a day and then it blew again, fitted a brand new one ( last one was the one from under the hood, figured it might be old ) so gonna see what this does. Any idea what might be happening if it blows again? What parts of the car should I check in that case?
@@jamesbond9011 you’ll have a short somewhere on your lights. Have you changed any bulbs recently, or fitted LED bulbs behind the heater panel? This is a favourite for blowing the fuse on these.
@@StupidBlokeStupidVideos really appreciate the time you take to react dude! I haven't checked the lights. If it happens again I'll be sure to do that!
@@jamesbond9011 no problem. Bad bulbs can cause it but it’s unlikely. The wrong bulb in the holder can too. Other than that, wiring for the side lights shorting to ground anywhere on the car. Bad wiring, damage to plugs or bulb holders or even Lights full of water etc
Great advice to check aftermarket LEDs first!🏆
EBay bonnet strip light packed up on mine!💩
7.5 amp fuse kept blowing until I disconnected it!
Thanks for the video 🍻🏅
A lot of the time it’s cheap Chinese aftermarket stuff that causes the issue. I’ve got a lot of the shite stuck to mine 🤣
The next time I fit a cheap Chinese LED strip light I’m going to wire in a inline fuse!
Another informative technological automotive repair video. Very illuminating 👍 i was sober when i watched this in my dinnertime at work 👍
Did you manage to get all the way through to the end sober?
@@StupidBlokeStupidVideos in this one yes as i was in the office 🤣🤣 next one i watch will be at home........
@@flapsfalkland5181 fair enough 😂
@@StupidBlokeStupidVideos 🤣🤣🤣
Great advice to check aftermarket LEDs first!🏆
EBay bonnet strip light packed up on mine!💩
7.5 amp fuse kept blowing until I disconnected it!
Thanks for the video 🍻🏅
At the back of the rev counter stalk is a screw which if you loosen it (it's a bugger to get to though) will allow the rev counter to move higher and gives more room to remove the cowl.
I forgot about that, but I prefer to struggle anyway 🤣
3 vids in 3 days?! OMGWTFBBQ
Also, get well soon, Joe. I hope you don't miss your winky 👍👍
It’s a one off, just had some vids I needed to go out before I could get on with new ones 🤣
@@StupidBlokeStupidVideos I see. Getting rid of the old 2022 stock before releasing the 2023 stuff. Its almost like you're a professional RUclipsr😎
@@thhc1744 something like that, apart from the professional bit
Yes get well soon Joe..
Nice one! Perfect video .
Thanks mate
This is class as I suffer from 'are my tail lights fucked?' paranoia whenever I'm driving. 🙂
If the fuse for them goes, all the dash lights go off too!
@@StupidBlokeStupidVideos Bonser!
Which fule do you need if you want to use leds for the dashboard light.
I want to prevent the fuse from blowing, when installing leds
This is the fuse that they blow, but the problem that causes the fuse to blow is an issue with the LEDs themselves not the fuse
I agree with Flaps 👍
If I’ve still got this problem and changing the fuse doesn’t help, what do you think could be wrong with the car? Is it an easy fix? Thanks in advance!
@@emmacowdell5945 could be the light switch on the indicator stalk. Double check the other fuses though as on some models they are in slightly different places
My fuse keeps blowing I changed the interior lights and i tried ten amp do u think i should try a bigger fuse
Definitely not. The problem is probably with the lights you changed. Have you fitted LED bulbs behind the dash by any chance?
@@StupidBlokeStupidVideos yes the ones for the heater box mate
@@mhus1720 they don’t like LED’s in the heater panel. Will keep blowing the fuse
@@StupidBlokeStupidVideos il have to throw the old ones in i guess🥲
@@mhus1720 it means your new bulbs are drawing too much power than is safe to be supplied. If you really want LEDs you need to find LEDs that pull the same watts as the old bulbs.
I was wondering if it’s possible to fit another car steering wheel (a vw one for example, the newly designed one with a flat line bottom instead of fully circular ones) into my c1. Do you think this is achievable? Besides it’s cost of course, is there going to be any other major problem in your opinion?
Not something I’ve ever looked into. I’m sure it would be possible, but the amount of modification required to make it work could be huge
@@StupidBlokeStupidVideos A Peugeot 108 steering wheel fits nicely. Seen a vid of a bloke having one in his 107
Do you know how to fix low beams not working on peugeot 107? All my lights are working except the low beams, all fuses are fine and I've changed the stalk switch also
@@staceyryan7317 it’s not something as simple as the plugs on the back of the bulbs is it? Have you checked the relay? Is it clicking when you turn the lights on?
@StupidBlokeStupidVideos no checked the back of the bulbs, I don't hear the relay clicking but don't know where to locate the relay
@ next time I’m driving my C1 I’ll see if I can locate it
@StupidBlokeStupidVideos thank you very much, if im right there's a seperate relay for the low beams and high beams, it's the relay for the low beams I'm looking for
Ehhh is that 3 this week ? Had some free time ???
Wish i had easy jobs like this ! Ive just had to drill out a bolt and angle grind off a head on the merc handbrake tree, adapt something and fit back !
Jobs on plastic and fuses are more straight forward than working on rusted old metal parts 🤣
Oh don’t worry I do my fair share of that kind of shit too haha. I just had a bit of a backlog of video’s that needed releasing before I can get onto newer ones I’ve filmed, but they were too short for a Saturday slot so fired them out at once 😆
Hi mate! I had same problem. Changed the fuse, everybody happy but when i stop the car and start the car again the problem is here again. Something wire problem?
Do you have LED bulbs fitted in the dash around the radio?
Hi mate my Peugeot 107 has a problem
When i switch on the parking lights or head lights the lights in the dashboard are not working and the speedometer is also not working if i switch off the lights they are working fine can you please help me with the solution
Sounds like a wiring issue to the speedo, but I’m not sure to be honest
Just a short little one, you really dont have to tell everybody.😆
I can neither confirm nor deny 🤦♀️
Double time on a Sunday , and a day off in lieu .. Win win.
Like your new friend Joyce ,,, he was more loose loose ,,,
Friend of mine did the whole male to female sex change thing ,,, and after a chat he said it was actually very painful
it wasnt getting the dangly bits removed
the painful bit was having his brain shrunk ,,, and his mouth widened ,,, 🤣🤣
3 shit video uploads in 3 days 😱
@@StupidBlokeStupidVideos we are not worthy ,,, we are not worthy ,, oh great one
keep em coming master
Thank you
Hope it helped!
Nice nails
Thanks 😍
YES
Orientate, oo000oo lol. Posh words even 🤓
No matter what words I say, it can never sound posh in my dialect 😂
They are a nitemare to get too 🙄
Not too bad, but could be easier tbh