Reminds me when i removed my engine. Took me like less than an hour. These engines are easy to remove. I blew mine over a boost leak and now i put the turbo back on lol
Reminds me of my dad and I :D. We never pulled my engine out but we did do a breakdown of the Rotrex supercharger after it broke. We are the lucky few with awesome dads. Much love!
My BRZ blew cylinder 3 bone stock at 55k on the clock. The total cost to have Subaru remove the engine, rebuild it, and reinstall it in the car came to $8500ish. I could check the receipt for an exact number if you're curious. So, when all's said and done, if you're under that number you can roughly calculate how much you saved.
I still think you put the turbo fa20 from the white Frs into the BRZ and keep the BRZ a nice street car. Then do the oblivious thing and 2JZ swap the white Frs.
Hey pal, I have a 2019 BRZ and crashed it in training. Now I also have to take out the engine for swaping the beam on the right side. Is there a way to contact you to get some instructions of the removal of the engine (connections, points of where the engine is screwed etc)?
How bad was it disconnecting the harness? A ton of connectors or no? Also did you have to pull anything off for the motor to clear the engine bay? Just curious in case i ever have to rebuild my motor.
Hey bro can you give more info to what all you had to do this is a 2013 brz with a 2015 motor??? Was it plug an play what did you have to do to get it running
Was this engine NA, boosted? How many miles? We’re you the first and only owner. I want to know what makes these engines fail or if their all design flaws and all or most of these engines will blow.
Just finished removing the engine today from the bay, took about 12 hours total along with the help of someone. The fly wheel bolts were the hardest part, definitely not fun nor easy. Probably going to spend the next 3 - 4 days putting the new engine
The gas in the AC system can kill you if you inhale too much of it almost immediately, no joke. No way it would have done harm to you since the ventilation was so good but that shit is seriously deadly.
Honestly speaking it shouldn't happen when stock, but anything can happen. With boost it's highly likely as you add miles. That's why my next mod is to rebuild my engine with rods, pistons, studs, bearings and gaskets. That way even if I boost it for a while the car will be good for a long time.
So this rabbit and bear story, is it going to be like a bed time story or the type of story your uncle tells you at thanksgiving after a couple drinks?
Ohhh thank feck when you said you were guna tell us the story about....."the rabbit and the bear" for a split second I thought you were guna tell us how babies are made...feeww.
Bro Alan you got to 2J swap Mikes car plzzz lol Have a good day Alan👍 Srry but I might miss a few vids im going to Cedar point with my family and cousin so yea Sorry But I will always like before watching like always❤️❤️ Have a great day Mike as well🤙
Well there is your problem.... K&N oil & airfilter... yeah greater flow initially with poor filtration = high performance temprorary with increased wear & soon engine replacement.... simples 😋 No free lunch in this WORLD.
Great car, shit engine. After recall had a rod knock issue. Apparently happening to A LOT of Fa20 engines. Just goes to show, not a Toyota engine under a Toyota hood....its shit.
Sure do miss having dad, i sure hope i can be as good a dad to my daughter as your dad is to yourself. He's been a great guide for yourself.
Dinxsy you’re going to be a great role model to your daughter, 110%! I’m very lucky to have drift dad
most underrated channel on youtube
I think that every time I watch his videos.
Agreed.
Honestly I agree
JohnStax appreciate the love guys!
i was just gonna say that
Reminds me when i removed my engine. Took me like less than an hour. These engines are easy to remove. I blew mine over a boost leak and now i put the turbo back on lol
Reminds me of my dad and I :D. We never pulled my engine out but we did do a breakdown of the Rotrex supercharger after it broke. We are the lucky few with awesome dads. Much love!
Tommy Mccoy exactly!
Just a suggestion if you ever do this again, just disconnect the shifter from the transmission. A lot simpler than taking out the center console.
You guys got that engine out so quick took me and my uncle around 2 hours to replace a window regulator
About to do this with my son. We’re in Florida also. We have a Series Blue BRZ we’re stuffing a LS3 in.
Quality dad and son time
Drift dad cracks me up
You might get great use outve a quick jacks lift system you might wana look into one they look awsome i am seriously looking myself
Like for 2jz
Come guys blow up like button 2jz all the way...
I need ya in my life. My timing cover needs a new seal. you guys motivate me to get it done soon. good stuff guys!
Yaay for drift dads return
Ayyy Drift Dad is back! Great quality content as always man.
Rodrigo Flores appreciate it man!
My BRZ blew cylinder 3 bone stock at 55k on the clock. The total cost to have Subaru remove the engine, rebuild it, and reinstall it in the car came to $8500ish. I could check the receipt for an exact number if you're curious. So, when all's said and done, if you're under that number you can roughly calculate how much you saved.
DriftDad you are "The MAN" !!
Drift dad❤
Ur father like a dream bro🛂 ..💓🤜 🤛💓 big like for him
I still think you put the turbo fa20 from the white Frs into the BRZ and keep the BRZ a nice street car. Then do the oblivious thing and 2JZ swap the white Frs.
LS1?
I can't wait for drift dad story time!
What are those wires hanging from the washer fluid box do they have a part number and where do they connect to?
Drift Dad from the dynamic duo!
Hey pal, I have a 2019 BRZ and crashed it in training. Now I also have to take out the engine for swaping the beam on the right side. Is there a way to contact you to get some instructions of the removal of the engine (connections, points of where the engine is screwed etc)?
BEAMS SWAP IT! pls boss
How bad was it disconnecting the harness? A ton of connectors or no? Also did you have to pull anything off for the motor to clear the engine bay? Just curious in case i ever have to rebuild my motor.
Do you have the factory service manual for the 2019 86?
Hey ambush what year was your dads old engine that blew ? Did u go from a old year engine to a new year engine swap?
Hey bro can you give more info to what all you had to do this is a 2013 brz with a 2015 motor??? Was it plug an play what did you have to do to get it running
Was this engine NA, boosted? How many miles? We’re you the first and only owner. I want to know what makes these engines fail or if their all design flaws and all or most of these engines will blow.
VVTI 1JZ
Another great video😌🤙
Mind if I ask how it blew? Seems like it was stock so was it just high revs and beating on it consistently?
What happen to DriftDad bandanna?
Try that in a rust belt car.. sometimes in afraid to look underneath my car.
Where did you guys order your engine I been searching for another Fa20 engine and I cannot find any at this point my car has rod knock aswell :((
Just finished removing the engine today from the bay, took about 12 hours total along with the help of someone. The fly wheel bolts were the hardest part, definitely not fun nor easy. Probably going to spend the next 3 - 4 days putting the new engine
You got this brother!
日本車を楽しんでくれてありがとうございます🙌
The gas in the AC system can kill you if you inhale too much of it almost immediately, no joke. No way it would have done harm to you since the ventilation was so good but that shit is seriously deadly.
Such knuckle busters
whats the name of the intro song? its amazing, and its not the song in the description
Why did you decide to leave the transmission on?
that what i thought, could pull just the engine?
Soooooo ready for the rabbit and the bear! XD
Do these engines suffer from rod knock it left stock or just when boosted
Honestly speaking it shouldn't happen when stock, but anything can happen. With boost it's highly likely as you add miles. That's why my next mod is to rebuild my engine with rods, pistons, studs, bearings and gaskets. That way even if I boost it for a while the car will be good for a long time.
👌👌👌
Put the LS1 in there?
Build it with forget internals and turbo for 400 whp.
I've never been this early
Who's da man!? I'm da man, I'm da man, I'm da man!
What transmission does an frs have? Like the actual part number for the the trans not just “issa 6 speed”
use google lol, nobody on a youtube comments section is going to know off the top of their head
Max Swagg already tried that and google was being a smart ass about it...
Aisin AZ6
It’s sssooooo much easer to unbolt the trans, and remove the engine without the trans especially a manual. But great job anyway. 👍👍👍
Appreciate it man :)
well, you have a ls1 laying around there right? :D
what was the intro song
I love this 😂
2JZ?
So this rabbit and bear story, is it going to be like a bed time story or the type of story your uncle tells you at thanksgiving after a couple drinks?
Nicholas Rodrigues pretty much hahaha
Its illegal to vent refrigerant into the atmosphere. You need to use a recovery machine next time, its very bad stuff for the enviroment
I thought you can remove the engine without taking out the transmission
9:01 im crackin up Lmao
Knock knock! Who's there? Your engine. Noooooo. Lol.
Jason Redding R.I.P. :(
Drift dad says he hopes the freon isn't a carcinogen... but doesn't he smoke??
Patrick Tran with the fireeeeeee. 100% true!
I wanted to here the rod knock
2JZ!!!!
swap to 1jz. its cheaper than 2jz and sounds good also
Hell yeah
jz swaps are all in the trans.
IM THE MAN... men
U dident need to unhook the ac pump u coulda moved it with the lines still on it
Ls swap or 2jz
I need to know the story about the rabbit and the bear !!!!
2jz = drift dad ... he promised
You know, I can have the engine out of my '98 Impreza RS in about 3.5 hours, by myself. So who's really the man?
Arthur Raber you are 😭
It's okay young grasshopper. But Subaru really does have a good system for making it easy to work on their cars, which is why I love mine so much.
Ohhh thank feck when you said you were guna tell us the story about....."the rabbit and the bear" for a split second I thought you were guna tell us how babies are made...feeww.
Bro Alan you got to 2J swap Mikes car plzzz lol
Have a good day Alan👍 Srry but I might miss a few vids im going to Cedar point with my family and cousin so yea Sorry
But I will always like before watching like always❤️❤️
Have a great day Mike as well🤙
DLN Official OG
Swap in something different.
Just put a 2jz on the brz
2jz😏 save
I heard post molone and was tempted to click away
You can just unbolt the compressor and move it to the side. Letting the freon go like that is really bad for the environment, and your health lol...
Well there is your problem.... K&N oil & airfilter... yeah greater flow initially with poor filtration = high performance temprorary with increased wear & soon engine replacement.... simples 😋 No free lunch in this WORLD.
Likes for ls swap
Son looks embarrassed but tbh dad is legit funnier than him
he's such a character, and it's a known fact my viewers like him more than me haha
The (men(sos)
Great car, shit engine. After recall had a rod knock issue. Apparently happening to A LOT of Fa20 engines. Just goes to show, not a Toyota engine under a Toyota hood....its shit.