Video #2 of the DIY project Sport-Craft. In this video I will show you how to repair gelcoat and use 3M premium filler. We are preparing the boat for a coat of primer and paint.
Nothing is perfect lol….thank you bro…i just bought a boat, got it home and thought maybe i bit off more than i could chew. After watching this I don’t think that at all.
The proper way to do this is to dremel out all of the spider cracks down to the point you don't see the crack then use Gel coat thickened with silica powder and fill the cracks with the thickened gel coat after they have been sanded keep your work area taped of so that you don't create unnecessary work for yourself. Keep the fill area as level to the surface of the gel coat as possible for less sanding. You can buy gel coat that matches your boat bt serial # Total boat paint co.
OK you know what you’re doing then I seen the king ranch then I heard the song at the end and your boy made the same comments I made to my dad because always got to have a critic I’m gonna watch another one of your videos lol
Thanks for the video ! I have a Ranger boat and my back right corner that’s in the sun all the time the gel coat looks to be failing my silver is turning yellowish and my raspberry actually looks to have tiny cracks in an area right where the corner of the boat is. It’s cover all the time but I think the UV rays are doing a number on it. Is something like that savable ?
How do you match the right color white? I have a 02 Bayliner Capri that has all these small little cracks on the top of the bow where the open bow seating is and I hate that it happened. They just appeared one year. I had I covered with a plastic tarp for a while and maybe the sun made it too hot and the gelcoat cracked from the heat? Anyways, I’d really like to fix them. I saw some product on Facebook put out by some company called gogolonge and it’s some type of paste that comes in a little tube. They make it look easy to use but I was unsure if it was a good product to use. I’m not familiar with repairing fiberglass so I thought that product sounded good. Do you have any thoughts on it?
Never heard of that product but the best way to color match is to get small sample off the boat and there is a place in Stuart, Florida fiberglass products that will color match and ship to you.
![Oasis - Oasis Live '25 [Official Trailer]](http://i.ytimg.com/vi/gol_JnuEtKM/mqdefault.jpg)
Best get some tension on those Jack straps… Those boats are heavy
Nothing is perfect lol….thank you bro…i just bought a boat, got it home and thought maybe i bit off more than i could chew. After watching this I don’t think that at all.
Awesome. Good luck with your project.
The proper way to do this is to dremel out all of the spider cracks down to the point you don't see the crack then use Gel coat thickened with silica powder and fill the cracks with the thickened gel coat after they have been sanded keep your work area taped of so that you don't create unnecessary work for yourself. Keep the fill area as level to the surface of the gel coat as possible for less sanding. You can buy gel coat that matches your boat bt serial # Total boat paint co.
Did you sand the area before using the filler and what grit sandpaper did you use to sand the areas with the bigger gouges?
OK you know what you’re doing then I seen the king ranch then I heard the song at the end and your boy made the same comments I made to my dad because always got to have a critic I’m gonna watch another one of your videos lol
Usually golf ball size to pea size ratio on fillers
Thanks for the video ! I have a Ranger boat and my back right corner that’s in the sun all the time the gel coat looks to be failing my silver is turning yellowish and my raspberry actually looks to have tiny cracks in an area right where the corner of the boat is. It’s cover all the time but I think the UV rays are doing a number on it. Is something like that savable ?
It may be too far gone due to sun damage. It is always worth a try though.
How do you match the right color white? I have a 02 Bayliner Capri that has all these small little cracks on the top of the bow where the open bow seating is and I hate that it happened. They just appeared one year. I had I covered with a plastic tarp for a while and maybe the sun made it too hot and the gelcoat cracked from the heat?
Anyways, I’d really like to fix them. I saw some product on Facebook put out by some company called gogolonge and it’s some type of paste that comes in a little tube. They make it look easy to use but I was unsure if it was a good product to use. I’m not familiar with repairing fiberglass so I thought that product sounded good.
Do you have any thoughts on it?
Never heard of that product but the best way to color match is to get small sample off the boat and there is a place in Stuart, Florida fiberglass products that will color match and ship to you.
Can i use the resin out of my repair kit or is it too runny?
Not sure what repair kit but I don’t think I would recommend it.
Just completed this job, front to back spider cracks. Gel coat does go off very quickly and is hard as nails to sand off 😭