⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Thank you for putting the engine size in the description of the video. It is unbelievable to me how many people will make a video but won't tell you the year of the car or the engine size.
Thank you so much, for this great video. This helped me to replace my car water pump. Its a 1.8L CRUZE. Really good hints. By the way, I used a two feet hose (4 mm inside diameter) and emptied the coolant, without removing the cover under the bumper.
There is a Husky 22 piece through wrench style torx set that won’t require removal of motor mounts it will fit with plenty of room to spare also use a little adhesive on the pump to attach gasket so it won’t move during assembly and torque to spec
Removing the wheel and turning the crank is one way to turn the engine and move pulley but you can also loosen the tensioner on the belt, spin the pulley enough to reach the bolt, and drop the tension again and remove the bolt
This is exactly what I did. I didnt want to remove the tire so I just took the belt off the alternator, spun the pully and replaced belt 3x. it wasnt that bad. Removing the Torx 45's where a bitch though. Those suckers were TIGHT
Just call me lazy but the only thing I jacked up the car for was to drain the coolant. This is a quick easy job if you use a torx bit and a ratchet wrench. I think it’s a T45 bit and a battery side post wrench will fit without having to do all the moving things around. Break it loose before you remove the belt. I’ve done two this way in about two hours each and I’m old and slow.
Ever since I started working on my Cruze I have kept one from an old line I replaced. Much easier to put it on the nipple down there and screw the valve open to drain it that way.
Hey Repair Guy, I have a question. I have a 2015 Chevy Cruze. I recently replaced the thermostat, now it stopped with the fan running high, but now there is a ticking noise coming from the engine on the side where the belt is. I have no idea what is making the ticking noise, any idea my friend? Thanks
Unfortunately I own the sonic version of this car, replaced wtr pump a year ago only to get to do it again, along with serpentine belt, pullies, and belt tensioner and last but not least timming belt. I put alot of miles on this car and it still gets good gas mileage 35-37mpg otherwise it would have been at the bottom of a ravine or just plain blown up! Should have bought a toyota.......but It was cheap, I sure know why now. Any way great video thanks for posting.
timing belt, change all components in that area that is required then once that is all done and put together change the water pump if you want change the thermostat also, throw on new belt and belt tensioner after you put timing cover back on they have a gasket for that too.
My dad cut his fingers off when he was working on the car with me. He didn't scream or cry out. He just picked his finger up off the ground & said "get me some tape I cut my fingers off & I'm bleeding allot" I looked up & my eyes popped out. In his other hand he had the little finger parts. I was in shock & he was like "come on hurry up I'm bleeding allot here". My dad is like one of those crazy cave men. He looks normal but he could out work a donkey.
How much should engine shift once i pull last bolt from right engine mount? Just thought up a great drinking 🍸 game .. every time he says "guys" , everyone take a drink... love you guys helped me out a shit ton.
Do you not have to worry about the car coming out of time when doing this?? I have a 2014 chevy cruze 1.8l NON turbo..and water pump is leaking.. from my understanding its the same belt that drives the timing.. and could mess it up if its moved wrong while replacing???
I'd charge $300 to $350. The water pump OEM cost me $96 bucks with shipping. Fairly easy. If it was for a friend or family member, I'd do it cheaper for this car.
2011-2014 cruz 2012-2014 sonic With 1.4 engine Leaking water pump is still under warranty! 10 years/150k regardless less of owner. Take it to Chevy have them fix it for free and get your complementary rental while they fix it! static.nhtsa.gov/odi/tsbs/2015/SB-10079524-0335.pdf Like this so everyone can see it.
![How To Replace Water Pump [Chevrolet Cruze 2011-2016 1.8L 1st Gen]](http://i.ytimg.com/vi/TXxe2Ljnm60/mqdefault.jpg)
![How To Replace Water Pump [Chevrolet Cruze 2011-2016 1.8L 1st Gen]](/img/tr.png)
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I replaced sparkplugs,ignition coils,thermostat,water pump and serpentine belt all on my own and i couldnt have done it without your video..thank u!👍
Thank you for putting the engine size in the description of the video. It is unbelievable to me how many people will make a video but won't tell you the year of the car or the engine size.
Thank you so much, for this great video. This helped me to replace my car water pump. Its a 1.8L CRUZE. Really good hints. By the way, I used a two feet hose (4 mm inside diameter) and emptied the coolant, without removing the cover under the bumper.
I had to pull my water pump today and this video helped me tremendously! Even had to drive 20 mins away to get a 12 point 19mm socket 🤣
You guy are amazing was able to finnish a 5 hour in 2 hours thanks to your cruze videos i will be subscribing
Best channel! Took 3 hours but I did it 😊😅. Thank you so much
Extremely helpful. This job would have taken days without the help of this video. Thanks.
thanks for making all these videos, its been a great guide to fixing my own 13 cruze!
Same for me bro
There is a Husky 22 piece through wrench style torx set that won’t require removal of motor mounts it will fit with plenty of room to spare also use a little adhesive on the pump to attach gasket so it won’t move during assembly and torque to spec
Thank you very very much for your fantastic videos because of you i save alot mony ... ❤
Loving the new gaskets not like the old paper gasket. Nor Yet had to do work on any of my vehicles omg. Last time I work on a car was my 2001 Dakota.
Gracias mi amigo me fue tu video de gran ayuda. Deseo que tengas mucho exito en tu canal ya que explicas con detalle todo.
Pretty simple job, just need all the right tools
I have to work on one of these turds today thank you for this video I would have never known how to take this apart
Excellent video! Thank you VERY much !!!
Removing the wheel and turning the crank is one way to turn the engine and move pulley but you can also loosen the tensioner on the belt, spin the pulley enough to reach the bolt, and drop the tension again and remove the bolt
This is exactly what I did. I didnt want to remove the tire so I just took the belt off the alternator, spun the pully and replaced belt 3x. it wasnt that bad. Removing the Torx 45's where a bitch though. Those suckers were TIGHT
Just call me lazy but the only thing I jacked up the car for was to drain the coolant. This is a quick easy job if you use a torx bit and a ratchet wrench. I think it’s a T45 bit and a battery side post wrench will fit without having to do all the moving things around. Break it loose before you remove the belt. I’ve done two this way in about two hours each and I’m old and slow.
I love how he says, oooook perfect 😊
Gotta be the best video I've seen on this
Thanks for showing me where the drain plug is located but obviously you need to stick to electronics.
Excellent video 👍
Where can I find the torque specs for all the bolts?
Is there any specific torque for installing the water pump bolts?
Excellent video bub 🔥👍🏽
You guys are awesome
Great Vid!!!
Thank you the video was awesome 👍
Excellent Video. I am sure anybody (hobbyist) can take a chance to do replace the wP
What you do if pulley spins when trying to take bolts out
On the 2014 that Torx 45 won’t fit between the rail and the pulley a short or stubby torx 45 is needed
P0366 camshift position sensor
The proplem in the ring meatl broken how can fix this ring
I always recommend getting a scrap hose to guide the coolant into the bucket. Waaaay less of a mess.
Ever since I started working on my Cruze I have kept one from an old line I replaced. Much easier to put it on the nipple down there and screw the valve open to drain it that way.
Great video
Thank you very much for you halp
can the waterpump rubber seal be replaces on the Chec cruz?
excellent vid!
You can avoid taking off the wheel by losing the tension on the belt and turn the water pump until you can lose the other(s) bolts.
Dp u need to replace the water pump n tension pulley when u replace the timing belt
Thanks
Hey Repair Guy, I have a question. I have a 2015 Chevy Cruze. I recently replaced the thermostat, now it stopped with the fan running high, but now there is a ticking noise coming from the engine on the side where the belt is. I have no idea what is making the ticking noise, any idea my friend? Thanks
If you haven’t fixed this yet. Has your car also been running like crap and dying while pumping gas? If so it’s the purge valve.
Unfortunately I own the sonic version of this car, replaced wtr pump a year ago only to get to do it again, along with serpentine belt, pullies, and belt tensioner and last but not least timming belt. I put alot of miles on this car and it still gets good gas mileage 35-37mpg otherwise it would have been at the bottom of a ravine or just plain blown up! Should have bought a toyota.......but It was cheap, I sure know why now. Any way great video thanks for posting.
I'm here watching this video and we replaced my timing belt and water pump about 2 or 3 years ago. Time to replace my water pump again. 🙄
Pls share the video for How to replacement of coolant pump of chevrolet beat LS petrol engine.....
Hi ,what is recommend to change first ,timing belt or wather pump?
timing belt, change all components in that area that is required then once that is all done and put together change the water pump if you want change the thermostat also, throw on new belt and belt tensioner after you put timing cover back on they have a gasket for that too.
Its alsoo for orlando 2012 2.0 disel?
My dad cut his fingers off when he was working on the car with me. He didn't scream or cry out. He just picked his finger up off the ground & said "get me some tape I cut my fingers off & I'm bleeding allot" I looked up & my eyes popped out. In his other hand he had the little finger parts. I was in shock & he was like "come on hurry up I'm bleeding allot here". My dad is like one of those crazy cave men. He looks normal but he could out work a donkey.
How much should engine shift once i pull last bolt from right engine mount?
Just thought up a great drinking 🍸 game .. every time he says "guys" , everyone take a drink... love you guys helped me out a shit ton.
Torque specifications?
Do you not have to worry about the car coming out of time when doing this?? I have a 2014 chevy cruze 1.8l NON turbo..and water pump is leaking.. from my understanding its the same belt that drives the timing.. and could mess it up if its moved wrong while replacing???
Gitago Gaming The water pump belt is not the same as the timing belt. The water pump belt just runs from the water pump to the alternator.
Hopefully you replaced the pump. I had the same problem n it was dripping on my a/c compressor and it stopped working
It should be serpentine belt drivin. Most are. Some are timing.
Does anyone know the torque spec?
No but these could be found if you get the service manual for the specific car ,,, all vehicles have this book available
A guy just told a lady. The water pump is $300 an they will charge $200 to put a new one on it. I hate people 🤦
Good gob
How much should I charge to replace the water pump on that car
I'd charge $300 to $350. The water pump OEM cost me $96 bucks with shipping. Fairly easy. If it was for a friend or family member, I'd do it cheaper for this car.
@@kyleboone8042 i got quoted $700 recently. Doing it myself obviously. lol
Going forward warn about cleaning up coolant because dogs like the taste and it will kill them, thanks.
2011-2014 cruz
2012-2014 sonic
With 1.4 engine
Leaking water pump is still under warranty! 10 years/150k regardless less of owner. Take it to Chevy have them fix it for free and get your complementary rental while they fix it!
static.nhtsa.gov/odi/tsbs/2015/SB-10079524-0335.pdf
Like this so everyone can see it.
LOL, "wear gloves, always". Doesn't wear gloves. /smh
Ojo
Unneeded steps that's not nessicary but waisting time on your video is taking the tire off, and all the other steps removing parts not needed T
To