So thorough! Among the most informative videos I have the laotie es 19 scooter and it's been so hard to find information on it .. I definitely appreciate your channel
hello, on the other hand it is not precise enough for the charging ports I would like to know how you do for the chargers to change the ports .. thank you
Hi i got a question for securing the shock you has to use that black wrapped plastic or you can use a good black plastic bag those black plastic bag that hold a lot weight or is better to use that black wrapped plastic just wondering can you tell me and thanks for the video...
Thank you for these gooood advices (especially shock absorber the clean film is a simple but great tip). About the washer I plan to order some teflon one. Can you tell me the inner and outer diameter needed for the axis please. (yours are 3D printed in orange nice)
Check out the flipsky 75100. It's an 84v vesc rated for 100 amps. I've added one to my ebike, and it's great. I'm gonna get my laotie ti 30 in the mail soon, and I'm excited to upgrade the controllers with them
@@PirateWasHere Nice! You probably already know this but out of the box the voltage limit is set to 57v, so you have to increase it if you're using over that. I set mine to 100v since that's what the components are rated for
@@PirateWasHere I contacted flipsky support because I was getting a overvoltage fault. 57v is the default for vescs, and they didn't change it for this one. All you do is go to motor configuration
Hello pirate, eweryone , did you ewer snapped bolts holding front swingarm (red thing :P ) to the body of the scooter , cant find any original replacement , any idea anyone ?
Whats the shocks spacer/bushing length for top and buttom, front and rear.. mine is different shocks.. want to change it like yours.. thanks in advance..
hi pirate . Best wishes. my laotie es18 33.6w makes a huge noise on the rear motor i have dismantled impeccable motor. when I start in mono it has no more power in mono motor. Have you ever had this problem? controller or motor of the rear wheel I can not locate it even with the open deck? can you help me if you like? Can you send me a link for purchase? thank you
hi , love your vids , i just bought the es19 3000x2 motor scooter i did as much research as i could but i only found out today that the e-brake cannot be adjusted on the controller ( Programmed by the controller, not available) i was hoping to disable it i like to coast off throttle , i am thinking if i disconnected the wires on the controller for the e-brake i would get an error and the scooter wont work , is there any way around this , ty for any reply .
That means you bought the banggod version with the less adjustable and more harsh acceleration controller. So in other words you have no engine brake and don't have to worry about it. This is what I have read elsewhere so look into it more if in doubt.
Hey man! So I just received my laotie es 18 lite. All electronics work but nothing from the throttle! Am I missing something obvious or do you think I have a faulty unit? Any advice welcome :) thanks !!
HI, thank you for review, I just got a ES19, I put 50psi in the tires, on the fastest speed at about 30 or more MPH is feels very unstable like its going to crash, I feel like something is wrong but not sure, do you have any ideas why at higher speeds it starts to wobble and skake? Maybe something needs to be adjusted, do you have any ideas? TY
@@PirateWasHere I see and one last question, is it possible to charge with 2x 5Ah chargers or is it only 1 of those or 2x 2Ah? Mostly so I don't give it too much juice and damage the battery? Thank's for helping out I am really leaning towards buying the Laotie Ti30. You seem to really enjoy it as well. I was thinking about the ES19 but not if it's not as good as Ti30 like you said. Price is almost 150€ euro more also for ES19 which I can use for a helmet, seat and other stuff if I get the Ti30 instead. Thank you Pirate you doing really great work here with your tutorials.
This video is pretty old , even at that time T85 cost 850$, from 2022 prices are like 50-120% higher. Anything above 4A could overheat Bms in battery pack, so can end up badly. I would stick to stock 2x 2a 🍕🍻
@@PirateWasHere Yeah I know, prices exploded sadly, not sure if they blamed it on Covid. I am not sure I buy that reason, probably just import politics as usual. Ok then I will just use the 2x 2Ah chargers included. Thank you for helping out.
@@PirateWasHere I see it only is available if you put inside poland. And if you put anyware outside then it is not available. And can not send outside poland. You know any solution to this?
Buenas noches soy de Perú y me gusta tus videos he comprado un scooter Laote ES18, y se hizo las modificaciones a lo cual no se si puedes hacer un video de como se debe conectar los controladores con sus respectivos cables. gracias y si tuviera el diagrama para conectar los controladores
Can i drive the Laotie es19 in the rain? cause by the looks of the interior of it, it should be able to handle rain / heavy rain. ? i even asked the customerservice and they tell me its not able to do it, even though it has ip54 rating. What to do?
Szefie, tak oglądam sobie dużo Twoich filmów i zdradź jedną rzecz - czy ten laotie na całym układzie z przodu, na kierownicy ma luzy, że wszystko lata przód tył???bo widziałem takie rzeczy w laotie ..
@@TomaszWalusWaluWalo wyrabia sie i znow trzeba dokrecac , powiem szczerze ze nie sprawia to wielkich klopotow , szczegolnie biorac pod uwage ceny i moc chinskich scootow 🍻🍻
@@PirateWasHere ...ok, jednak po roku takiego wyrabiania się i dokręcania może się wyrobić na tyle, że będzie to stanowiło poważny problem nie?... 😮💨🙂
@@TomaszWalusWaluWalo jasne wtedy trzeba wymienic srube , jest dosc dluga i ciezko jak znalezc na ali ale da sie ( tylko raz widzialem aby ktos wymieniają , i to jeszcze z wlasnej winy, gdyż dokrecil baaardzo za mocno i pekla )
@@PirateWasHerehey there hope you're doing good man, I was wondering, have you done any tutorials on wheel balancing? I bought an es 19 because it was super cheap and your videos are so well detailed and helpful, no other scooter comes with tutorial videos this good! Thank you again man, my top speed is 66 mph at 178 lb
@PirateOnRUclips well there's no shortcut for trial and error I guess LOL I appreciate you getting back to me, I figured I was late to this party . Now that I got my heavy death scooter, I'm looking for the lightest weight scooter, that also goes fast enough to kill me. I don't know how often you browse the Marketplace, but any suggestions? Or are there any unique scooters / brands that have caught your attention? Thanks for your time my dude!
guys, can anybody advice how to remove the deck on es18 lite??? I have tried, but after removing all screws I can't lift it up....it still holds in the front something and it drives me nuts.....
@@PirateWasHere what the hack? under the tape are screws??? Im so ******, no I didn't because I never thought that there might be some when all the other are visible as the sand paper is only in the middle....will check it out
@@PirateWasHere Thanks for the answer :) I have one last question about the microphone charingports 😅 can I just not isolate the ports? with a cover ? Like this
@@PirateWasHere I hope so. My legs looks like I had an accident on this thing but the truth is that’s the board bumps in to my legs while carrying it around lol
Bonjour pirate et bien je t'aurais bien commandé des pièces 3d grip arrière boyueda mais maintenant il y a des frais de douane à payer à la réception du colis en France donc je préfère m'abstenir 😞😋😜🛴
Thanks so much for the video, I ordered one of these scoots about 1 week ago, still have a really long wait. I would like to order everything you used on the scoot, I checked your shop and started building the shopping cart, and I have a question regarding the Motor cooler's which one do I choose for the valve position - I want one turbo and one ultimate? Then last question where can I buy that little cordless drill you used?
Hi Carlos, we have to wait untill scoot will arrive, otherwise we can't determine which type of the cooler you need ( position of the air valve ) . I used XIaomi drill, best stuff ... but stupid expensive last days , Here is my Video about it
So thorough! Among the most informative videos I have the laotie es 19 scooter and it's been so hard to find information on it .. I definitely appreciate your channel
best scooter channel on RUclips
hello, on the other hand it is not precise enough for the charging ports I would like to know how you do for the chargers to change the ports .. thank you
Did you have to re-make a hole for the headlight support fixings?
Hi i got a question for securing the shock you has to use that black wrapped plastic or you can use a good black plastic bag those black plastic bag that hold a lot weight or is better to use that black wrapped plastic just wondering can you tell me and thanks for the video...
Hello
where can I buy those disc brakes with round center for Laotie es 18
Thank you for your anwser
in the 3:10 minutes is where it started when he start to take the suspension so you don't wait to much...
The steering wheel screws that are hooked to the front well suspension broke, do you know where to find them ?
Thank you for these gooood advices (especially shock absorber the clean film is a simple but great tip). About the washer I plan to order some teflon one. Can you tell me the inner and outer diameter needed for the axis please. (yours are 3D printed in orange nice)
What exactly is that plastic wrap called so I can buy some? Thank you for the video, it is extremely helpful.
Check out the flipsky 75100. It's an 84v vesc rated for 100 amps. I've added one to my ebike, and it's great. I'm gonna get my laotie ti 30 in the mail soon, and I'm excited to upgrade the controllers with them
I ordered 2 , one week ago ;)
@@PirateWasHere Nice! You probably already know this but out of the box the voltage limit is set to 57v, so you have to increase it if you're using over that. I set mine to 100v since that's what the components are rated for
@@archietheproto7706 i didn't know about it, any link where i can find more info ?
@@PirateWasHere I contacted flipsky support because I was getting a overvoltage fault. 57v is the default for vescs, and they didn't change it for this one. All you do is go to motor configuration
@@PirateWasHere i just got another one, it looks like they rectified the issue. I'll be receiving 2 more and we'll see if they're the same
Hello pirate, eweryone , did you ewer snapped bolts holding front swingarm (red thing :P ) to the body of the scooter , cant find any original replacement , any idea anyone ?
So seems like you guys are ready ⚡🤘⚡
Can you share the setting on your ES18P? I couldn't get mine pass 30mph, I believe I messed up some of the setting :(
Whats the shocks spacer/bushing length for top and buttom, front and rear.. mine is different shocks.. want to change it like yours.. thanks in advance..
Hello Pirate.
I hope you are doing well.
Where I can find the cooler for Laotie ES19?
I didn't see in your shop.
Thanks man. 👍
At the end of this week,i have to test it hard at this weekend to be sure that its worth your attention 🍕🍻
@@PirateWasHere I hope to buy this cooler soon and see the good news about the test. 😉
Thanks a lot mate! 💪
My back wheel don't work on my es19 any idea what it could be or how I fix it ?
hi pirate . Best wishes.
my laotie es18 33.6w makes a huge noise on the rear motor i have dismantled impeccable motor. when I start in mono it has no more power in mono motor. Have you ever had this problem?
controller or motor of the rear wheel I can not locate it even with the open deck?
can you help me if you like?
Can you send me a link for purchase?
thank you
Dogs always have a nice comfy bed to lay on and all prefer the hard floor 😂😂🐾🐾🐶🐶
yeah this is crazy xD
Where can I get a 5A charger for my Laotie Es18P?
hi , love your vids , i just bought the es19 3000x2 motor scooter i did as much research as i could but i only found out today that the e-brake cannot be adjusted on the controller ( Programmed by the controller, not available) i was hoping to disable it i like to coast off throttle , i am thinking if i disconnected the wires on the controller for the e-brake i would get an error and the scooter wont work , is there any way around this , ty for any reply .
That means you bought the banggod version with the less adjustable and more harsh acceleration controller. So in other words you have no engine brake and don't have to worry about it. This is what I have read elsewhere so look into it more if in doubt.
Hi,what is the correct preasure in tires for es19 laolite?
Hey man! So I just received my laotie es 18 lite. All electronics work but nothing from the throttle! Am I missing something obvious or do you think I have a faulty unit? Any advice welcome :) thanks !!
Possible that something doesn't work, ask for controllers nd LCD screen set
HI, thank you for review, I just got a ES19, I put 50psi in the tires, on the fastest speed at about 30 or more MPH is feels very unstable like its going to crash, I feel like something is wrong but not sure, do you have any ideas why at higher speeds it starts to wobble and skake? Maybe something needs to be adjusted, do you have any ideas? TY
Did you ever figure it out bro?
Can I 3d print the cooler ?
i have this scooter i need a affter markit 120 ior it 125mm i was told shockj that batter than what i have now
Are there going to come Ti30 coolers? Ez money
Nope, it wil almost doesnt work so I dont want to make project for it🍻🍕
When you change charging ports, do you need a new charger then with different pins? I see the new one only have 2 holes but the charger have 3?
with charging ports you will get extra connectors to change ports on charger :)
@@PirateWasHere I see and one last question, is it possible to charge with 2x 5Ah chargers or is it only 1 of those or 2x 2Ah? Mostly so I don't give it too much juice and damage the battery?
Thank's for helping out I am really leaning towards buying the Laotie Ti30. You seem to really enjoy it as well. I was thinking about the ES19 but not if it's not as good as Ti30 like you said. Price is almost 150€ euro more also for ES19 which I can use for a helmet, seat and other stuff if I get the Ti30 instead.
Thank you Pirate you doing really great work here with your tutorials.
This video is pretty old , even at that time T85 cost 850$, from 2022 prices are like 50-120% higher.
Anything above 4A could overheat Bms in battery pack, so can end up badly. I would stick to stock 2x 2a 🍕🍻
@@PirateWasHere Yeah I know, prices exploded sadly, not sure if they blamed it on Covid. I am not sure I buy that reason, probably just import politics as usual.
Ok then I will just use the 2x 2Ah chargers included.
Thank you for helping out.
Nice videos. But I dont get these banggod pages. Its impossible to ship any scooters to europe? why is this?
If scoot is in EU warhouse ( Ti30/ES19 is now in Polish warhouse ) , then no problem
@@PirateWasHere I see it only is available if you put inside poland. And if you put anyware outside then it is not available. And can not send outside poland. You know any solution to this?
Nice job brother 👍 Why Pablo didn't buy ES19 since it's in Banggood's Polish warehouse for nearly the same price..??🤔
Cuz he ordered it like 3 months ago ;)
Buenas noches soy de Perú y me gusta tus videos he comprado un scooter Laote ES18, y se hizo las modificaciones a lo cual no se si puedes hacer un video de como se debe conectar los controladores con sus respectivos cables. gracias y si tuviera el diagrama para conectar los controladores
Super video Pirate! What length are those springs if one wanted to swap with oil damped springs?
Could be hard, there is no 135mm shock size :/
Can i drive the Laotie es19 in the rain? cause by the looks of the interior of it, it should be able to handle rain / heavy rain. ? i even asked the customerservice and they tell me its not able to do it, even though it has ip54 rating. What to do?
I drive a Laotie ES18P in the rain and not problem
Skąd jesteś? Masz jakiś "warsztat", do którego można by podjechać z hulajnogą?
Hej, raczej nie zajmuje sie serwisem bo moja 1h stawka to minimum 150zl, wiec malo kto sie decyduje na to 🍻🍕
@@PirateWasHere a mimo wszystko, skąd jesteś?
Okolice miasta lodz :)
@@PirateWasHere Ok, to raczej za daleko - ja spod Poznania.
Szefie, tak oglądam sobie dużo Twoich filmów i zdradź jedną rzecz - czy ten laotie na całym układzie z przodu, na kierownicy ma luzy, że wszystko lata przód tył???bo widziałem takie rzeczy w laotie ..
One wszystkie tak maja, od spodu jest nakretka , jak dokrecisz luz prawie znika
@@PirateWasHere nie wyrabia się to z czasem?
@@TomaszWalusWaluWalo wyrabia sie i znow trzeba dokrecac , powiem szczerze ze nie sprawia to wielkich klopotow , szczegolnie biorac pod uwage ceny i moc chinskich scootow 🍻🍻
@@PirateWasHere ...ok, jednak po roku takiego wyrabiania się i dokręcania może się wyrobić na tyle, że będzie to stanowiło poważny problem nie?... 😮💨🙂
@@TomaszWalusWaluWalo jasne wtedy trzeba wymienic srube , jest dosc dluga i ciezko jak znalezc na ali ale da sie ( tylko raz widzialem aby ktos wymieniają , i to jeszcze z wlasnej winy, gdyż dokrecil baaardzo za mocno i pekla )
Hey pirate! Can you help? My Laotie ti30 landbraker rod swung forward and backward.
any video ?
Man, those motor.coolers are a brilliant brilliant idea, very well thought out..... Brilliant stuff.....
Do you think you could make one for Weped FS?
Thank you, I could but it will not really work so I will pass on this one
@@PirateWasHerehey there hope you're doing good man, I was wondering, have you done any tutorials on wheel balancing? I bought an es 19 because it was super cheap and your videos are so well detailed and helpful, no other scooter comes with tutorial videos this good! Thank you again man, my top speed is 66 mph at 178 lb
@@TravelatorH8r no man, you need special machine for it or just be lucky while placing wxtra weight on rim. Thanks , have a great week
@PirateOnRUclips well there's no shortcut for trial and error I guess LOL I appreciate you getting back to me, I figured I was late to this party . Now that I got my heavy death scooter, I'm looking for the lightest weight scooter, that also goes fast enough to kill me. I don't know how often you browse the Marketplace, but any suggestions? Or are there any unique scooters / brands that have caught your attention? Thanks for your time my dude!
@@TravelatorH8r try ebike, safer , faster
Hi just ordered your xt30 full set when the light adapter ready for sale?
Hi , it will be done in 6h 🍕🍻
guys, can anybody advice how to remove the deck on es18 lite??? I have tried, but after removing all screws I can't lift it up....it still holds in the front something and it drives me nuts.....
under the grip tape on the front are 2 screws , did U remove them ?
@@PirateWasHere what the hack? under the tape are screws??? Im so ******, no I didn't because I never thought that there might be some when all the other are visible as the sand paper is only in the middle....will check it out
@@PirateWasHere thanks man for such prompt feedback!
pirate, pls, any ideas where I can buy a replacement "sand cover"? I have searched various e-shops but didn't find anything...
pirate you was right about 2 hidden screws under the sand paper tape 😃👍
Where did you buy the bigger power bank?
What do you mean :)
@@PirateWasHere the power brick the 5 amps power supply ?
should i do this for the sr 10 ?
Yes !
Welcome Pablo in the LAOTIE ES18p Club !! 👍🛴💨💨
Wait, does this cooler also works on Laotie ti30 ?
No :(
@@PirateWasHere oh its ok, maybe someday you can print something like this for the laotie ti30, i would buy it ;) ( if the laotie ti 30 needs it too )
It will just looks nice buy not work very well
@@PirateWasHere Thanks for the answer :) I have one last question about the microphone charingports 😅 can I just not isolate the ports? with a cover ? Like this
workupload.com/file/8gyaJYcnf4q
My laotie es19 arrived 2 days ago and I’m scared to drive this monster. And it’s heavy af I barely can lift this thing into my trunk :/
Yeah it's heavy... , so after 3 months you will BiG like biggets guys on the gym ;)
@@PirateWasHere I hope so. My legs looks like I had an accident on this thing but the truth is that’s the board bumps in to my legs while carrying it around lol
@@KaeseSchimmel it's for driving, not for walking with it ;)
@@IvanKrakow actually all I can do with this thing right now is to carrying it around because the rear controller died after 100 meters lol
@@KaeseSchimmel not good, how many kilometeres did you do to that problem? Any ideas, where to buy new controller for change?
Hi im from canada how can i order those things
Hi there, here is my Eshop pirate.ac/shop . In next week i will add more colors and items :)
Bonjour pirate et bien je t'aurais bien commandé des pièces 3d grip arrière boyueda mais maintenant il y a des frais de douane à payer à la réception du colis en France donc je préfère m'abstenir 😞😋😜🛴
I am from Poland so no customs ;)
Jednak elektryczne fatbike są bezpieczniejsze i pewniejsze...
A samochody to juz wogole sa bezpieczne ;)
Thanks so much for the video, I ordered one of these scoots about 1 week ago, still have a really long wait.
I would like to order everything you used on the scoot, I checked your shop and started building the shopping cart,
and I have a question regarding the Motor cooler's which one do I choose for the valve position - I want one turbo and one ultimate?
Then last question where can I buy that little cordless drill you used?
Hi Carlos, we have to wait untill scoot will arrive, otherwise we can't determine which type of the cooler you need ( position of the air valve ) . I used XIaomi drill, best stuff ... but stupid expensive last days , Here is my Video about it
@@PirateWasHere Thanks so much bud, awesome video's by the way...
@@PirateWasHere hey Pirate, my scoot is coming tomorrow :). I re-watched the video again - will you list the nylon washer in the near future?
@@JacksColon69 I will add it today to my Eshop 🍕🍻
Where can i bought the cooling wheel system?
Check my Eshop