I'm having some problems with my Milsim. Air is passing through the nozzle as if nothing is sealed. This had occurred when it was getting multi feeding. When I opened it the spool was in the raised position and I had to push it down for it to operated regularly. This problem occurs all the time after the multi feeding and had permits me to use the engine. Thank you and I hope to hear for any suggests soon.
There a maintenance video for Gen 2 N7? Have one engine that nozzle doesn’t retract to load a bb since new. Why I’m at it on cleaning it I planned on cleaning the other 4 I have in guns.
I have 2 questions: 1. Is nozzle for A&K SR25 for n7 will fit in Classic Army SR25 CA-AR014M? 2. Is it possible, to correct a bit of nozzle position closer or further?
Howdy i got a redline n7 milsim this Christmas and it now just blows air outside of the nozzle when i hook it up to air without pulling the trigger and when i pull the trigger it does nothing is it possible that i broke the trigger mechanism because i installed the trigger spring with it?
When are you going to make maintenance video about N7 G2 Milsim. I cannot find even a exploded view about this product. Maybe that is why people are buying polarstar instead coz the lack of info about your product
Here are links to an exploded view and a cutaway view of the N7 Gen-2 www.redlineairsoft.com/index.php/hpa-conversion-kits/product/download/file_id-374 www.redlineairsoft.com/index.php/hpa-conversion-kits/product/download/file_id-366 While we do not have a Gen-2 video yet, most of the information in the Gen-1 Video still applies.
Can you do a video for maintaining/cleaning the Milsim G2, V3? Mine is leaking when I hold the trigger down and it didn't before. I have already disassembled, cleaned, greased the engine and trigger valve but the leak continues
If the leak is down the nozzle replace the tip oring on the spool. It is a -005 Buna (3/32 ID x 7/32 OD) also make sure that the brass spool nut is tight.
Either the pressure on the regulator is too low on the reg or the spool orings need to be lubed. If neither of those fix it contact us at sales@redlineairsoft.com
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
@Redline Airsoft
Please can you do a full build and assembly video of the N7 Milisim in combo with the gen 2 Airstock
I'm having some problems with my Milsim. Air is passing through the nozzle as if nothing is sealed. This had occurred when it was getting multi feeding. When I opened it the spool was in the raised position and I had to push it down for it to operated regularly. This problem occurs all the time after the multi feeding and had permits me to use the engine. Thank you and I hope to hear for any suggests soon.
There a maintenance video for Gen 2 N7? Have one engine that nozzle doesn’t retract to load a bb since new. Why I’m at it on cleaning it I planned on cleaning the other 4 I have in guns.
hello, when I attach the line to the redline the aira comes out of the nozzle all the time, what can be the problem?
I just purchased the srm hurricane, and the air is just blowing out the nozzle when I connect it to air. Any tips on how to fix this issue?
I have 2 questions:
1. Is nozzle for A&K SR25 for n7 will fit in Classic Army SR25 CA-AR014M?
2. Is it possible, to correct a bit of nozzle position closer or further?
Howdy i got a redline n7 milsim this Christmas and it now just blows air outside of the nozzle when i hook it up to air without pulling the trigger and when i pull the trigger it does nothing is it possible that i broke the trigger mechanism because i installed the trigger spring with it?
Try lubing the spool as per this video. If that doesn't work contact Redline at sales@redlineairsoft.com
When are you going to make maintenance video about N7 G2 Milsim.
I cannot find even a exploded view about this product.
Maybe that is why people are buying polarstar instead coz the lack of info about your product
Here are links to an exploded view and a cutaway view of the N7 Gen-2 www.redlineairsoft.com/index.php/hpa-conversion-kits/product/download/file_id-374 www.redlineairsoft.com/index.php/hpa-conversion-kits/product/download/file_id-366 While we do not have a Gen-2 video yet, most of the information in the Gen-1 Video still applies.
What kinda lube are you using. I knownits a old video. But I'm looking in to the milsim version and need to know all the ins and outs
We only recommend Tech-T grease for use with our engines and regulators. www.redlineairsoft.com/index.php/lubricants/product/16-tech-t-gun-sav
Can you do a video for maintaining/cleaning the Milsim G2, V3? Mine is leaking when I hold the trigger down and it didn't before. I have already disassembled, cleaned, greased the engine and trigger valve but the leak continues
If the leak is down the nozzle replace the tip oring on the spool. It is a -005 Buna (3/32 ID x 7/32 OD) also make sure that the brass spool nut is tight.
@@jimtentes5128 I believe you are correct there. I'll try looking for one.
What do i do if my n7 milsim is wasting all the air when i screw in the tank to the airstock
Either the pressure on the regulator is too low on the reg or the spool orings need to be lubed.
If neither of those fix it contact us at sales@redlineairsoft.com
For what replica did you need that longer nozzle?
That was a nozzle for a SCAR-H