Видео

hello, my sfr would go over the setted fps by itself till 160 psi. i opened it and didnt found the little oring inside that stays on the bottom. worked well for 6 years, never disassembled. Bought brand new... could be possible it never had the little o-ring inside? sure 100% the o ring didn't felt out during disassembly

What about the mini? Is it better?

Dope video thanks for the help guys;)

There a maintenance video for Gen 2 N7? Have one engine that nozzle doesn’t retract to load a bb since new. Why I’m at it on cleaning it I planned on cleaning the other 4 I have in guns.

Just seeing you take this apart really helped me learn exactly how all the parts function and what I needed to do to fix my regulator thank you so much

What about a leak in the main valve? You just removed the assembly and didn't talk about it.

Great video. Is there a heavy and light spring that goes inside?

hello, when I attach the line to the redline the aira comes out of the nozzle all the time, what can be the problem?

Bought my n7 in 2018, and it's still going strong without any issues or maintenances.

Ordered my sfr mini today w the hose for a p* f1! Can't wait to assemble it. I love this firm - u guys stand for too notch quality, best of the best

does this work for the Mini?

Mine is at 290 psi what i do

Have had nothing but issues and I have three of the newer ones, my boys purchased one each and I loved the thing so I purchased one and pressure creep from the second use on mine and there’s ramp past 160 in under a minute 3 months old? I would love to get them fixed

May i know why my mini sfr has only 11 spring

Can i use this on 800 psi output tank

My release where I let all my air out is stuck do I just unscrew it?

When are you going to make maintenance video about N7 G2 Milsim. I cannot find even a exploded view about this product. Maybe that is why people are buying polarstar instead coz the lack of info about your product

When are you going to make maintenance video about N7 G2 Milsim. I cannot find even a exploded view about this product. Maybe that is why people are buying polarstar instead coz the lack of info about your product

When are you going to make maintenance video about N7 G2 Milsim. I cannot find even a exploded view about this product. Maybe that is why people are buying polarstar instead coz the lack of info about your product

I have a problem with my sfr. Without a reason the valve on the regulator start blowing air. I opened the regulator to replace all the o rings and refresh the grease but the problem still the same. If the valve is damaged how can i replace it?

Thank you Redline and James for producing a great product.

Can you do a video for maintaining/cleaning the Milsim G2, V3? Mine is leaking when I hold the trigger down and it didn't before. I have already disassembled, cleaned, greased the engine and trigger valve but the leak continues

What kinda lube are you using. I knownits a old video. But I'm looking in to the milsim version and need to know all the ins and outs

such a easy fix thanks for the great video it helpted me a lot :)

Hi, i got a Question: What Size of Inbus (inch) is needed for the Regulator to regulate the Pressure? Because ive lost my adjuster Wrench 🙄😔...or where can i get a new one? Thanks 😎

It won’t let me take the tournament lock off and every time I use the adjuster wrench nothing happens and when I got air plugged in it won’t let me adjust my psi

Good afternoon. Do you have a video or instruction to install the butt. Bought but it turns out to deliver. Poison gear.

I just purchased the srm hurricane, and the air is just blowing out the nozzle when I connect it to air. Any tips on how to fix this issue?

I just got one of there and it is putting out too much pressure, so it damages gauge. What do I need to do? Rebuild kit?

Where do I buy the o ring rebuild kit?

Howdy i got a redline n7 milsim this Christmas and it now just blows air outside of the nozzle when i hook it up to air without pulling the trigger and when i pull the trigger it does nothing is it possible that i broke the trigger mechanism because i installed the trigger spring with it?

Keep up the great work guys. Love my N7 system, and can't wait to see you guys expand and innovate.

I'm having some problems with my Milsim. Air is passing through the nozzle as if nothing is sealed. This had occurred when it was getting multi feeding. When I opened it the spool was in the raised position and I had to push it down for it to operated regularly. This problem occurs all the time after the multi feeding and had permits me to use the engine. Thank you and I hope to hear for any suggests soon.

I notice that the manifold has 4 spaces, 2 are taken by the pressure gauge and blowout valve and one by an air line. Is it possible to attach a second air line to the manifold? Is that a risky move? or does it do anything to the pressure or output?

I have 2 questions: 1. Is nozzle for A&K SR25 for n7 will fit in Classic Army SR25 CA-AR014M? 2. Is it possible, to correct a bit of nozzle position closer or further?

@Redline Airsoft Please can you do a full build and assembly video of the N7 Milisim in combo with the gen 2 Airstock

What do i do if my n7 milsim is wasting all the air when i screw in the tank to the airstock

how do you remove the manifold?

For what replica did you need that longer nozzle?

I have an sfr regular but it won't fit on my lap or normal ninja carbon fiber tank y is this

Nice video, companies should do more of these! Although I got one, irrelevant to this, question: why is the pressure gauge divided into 5 parts for 40 PSI pressure? By that I mean, you got 80 PSI and 120PSI, and the spaces in between are 5, which means each line is 8PSI. Isn't it far easier to divide it into 4 parts, so you get 10PSI each line? Thanks!