Here you see a seamless process.......on some other RUclips channels you see savages smashing fu....out of wishbones,driveshafts,trapping wiring in bell housing and all sorts of trauma....I've done a lot of clutches on the ground and what you see here is like masterclass....
Good evening Sir. I live in Scotland Connecticut USA I own a mobile repair business and I must say that you are a true inspiration for me. Keep up the great work and keep your sanity!!
Scotland in USA..? Didn’t know that. Learned something new there .. have you got a RUclips channel I can subscribe to. I won’t see your response unless you send it on a new thread
You're a King 👏💪i use to do some clutch change on the ground but it's a pain in the ass😔and with shity tools it's like hell😂 keep going 💪and happy Easter from Portugal 🇵🇹😉
Excellent work as usual Kevin. I do find it a bit odd, especially on the Caravelle that the client wouldn't opt to replace the rear engine seal as preventative maintenance while having the DM flywheel removed.
hope you are well , well it is going to be a bit warmer next week for you its about time I do not think that van has been well looked after ,thanks for the video
Belle video,mais en choisissant autre chose qu'un bus Volkswagen,vous vous seriez épargné tout ce travail,cette marque étant réputée catastrophique concernant la fiabilité des divers composants.Bon courage pour la suite..bientôt le moteur ,puis l'électronique!!
Are you ex military, the execution of your day from the weather, route planning and expert mechanics done with surgical precision is nothing short of a special ops field exercise..
In this humid country, we don't see you working with stuck screws, it's almost a miracle, English. where are the sledgehammers and chisels...,where are the ancestral root mechanics
Авто/Мото
contact us for your clutch replacement. 🇬🇧
www.williamsmobileclutch.co.uk
0:08 2012 Citroen DS3 Style E-HDI 1.6L Diesel.
33:46 2006 Toyota Yaris T-Spirit 1.3L Petrol.
1:03:43 2004 VW Transporter T28 (85) TDI 1.9L Diesel.
1:37:11 2012 Ford Focus Zetec TDCI 1.6L Diesel.
2:09:43 2015 Peugeot Expert Tepee Comfort HDI 2.0L Diesel.
Here you see a seamless process.......on some other RUclips channels you see savages smashing fu....out of wishbones,driveshafts,trapping wiring in bell housing and all sorts of trauma....I've done a lot of clutches on the ground and what you see here is like masterclass....
Thanks for the feedback. Very much appreciated 🍻🍻🍻🍻
I watch these every time from start to end . Methodical in every step Great videos 😊
Thank you for supporting the channel. Very much appreciated 🍻🍻
Cada vez hay más autos con soportes de plástico!!!!
Excelente trabajo Kevin
Saludos desde Salta Argentina
🇦🇷 🍻🍻.. that’s correct. We are definitely entering the plastic age.
Beaux travail et propre bravo
Merci beaucoup
Thank you for this week Kevin,
Regards from Sweden
that Peugeot Expert looked like a right jigsaw puzzle to work on and yet you made it look like a walk in the park. 👍
Like navigating through longleat maze 😆🍻🤪
😂🤣@@WMCS
Someone jacked that up in the wrong place previously... Ouch!
Good evening Sir. I live in Scotland Connecticut USA I own a mobile repair business and I must say that you are a true inspiration for me. Keep up the great work and keep your sanity!!
Scotland in USA..? Didn’t know that.
Learned something new there ..
have you got a RUclips channel I can subscribe to.
I won’t see your response unless you send it on a new thread
@@WMCS yes we have all the countries names here, mexico , norway, france lol those i named are in maine
You're a King 👏💪i use to do some clutch change on the ground but it's a pain in the ass😔and with shity tools it's like hell😂 keep going 💪and happy Easter from Portugal 🇵🇹😉
🇵🇹 thank you .. happy Easter 🐣 🍻🍻🍻
Awsome work kev😊
great work
Excellent work as usual Kevin. I do find it a bit odd, especially on the Caravelle that the client wouldn't opt to replace the rear engine seal as preventative maintenance while having the DM flywheel removed.
Top video mate ,, i just doi g the clutch on my van dual mass aswell it went on me the other day so i had to get it done by myselfe lol ,,
How did you get on. Was it fairly straightforward 🍻🍻🍻
@@WMCS am not going to lie it woz better then i fought hardest part was lifting gearbox in and out but i done it 👍
hope you are well , well it is going to be a bit warmer next week for you its about time I do not think that van has been well looked after ,thanks for the video
Hope not too warm tho😁🍻🍻.. as that brings rain ☔️
That VW transporter looked a right pain in the neck, hope that starter motor didn't hit you.
Great vid as always.
great videos 👍
Thank you. 🍻🍻🍻
The best my freind
Thanks Kevin hope your well 😊
Hey Matt. Definitely full of vitality. Something I’m very grateful for.
Hope you’re in best of health and high spirit yourself. 🍻
Fair 1, that's a heavy box.. Respect
🍻🍻🍻
DS3! Thanks for the insight.
Not too bad a repair part from that bolt behind the cat.
No Minis this week? I'm super disappointed, lol. Keep up the great work dude!
😆🍻… they’re great catch. So hopefully one will be in the back of the net soon.
that is Amazing
@wmcs Inspiring skill lever! Does the Transporter method work in DMF replacement on DSG as well?
Лайк за видео молодец дякую таким людям которые помогут
For 100k kev u should do a q+a video. We would love to get to know the great man behind the mask! Have a good week!!
I’m thinking of doing a full high spec Milwaukee tool giveaway.
The man at work is just that.
@@WMCS I would love just one of your old spanners!! I would use it on my car. 😂
Un Homme courageux.
Merci
Full send bro never lift 😏 🤙 mobbin deep 🙌 have a good weekend/week hey bro curious ever have a wheel stud break on you
No... I don’t think I’ve seen it happened either. 🍻🍻
😮 nice nice bro
Tout mon respect car me semble assez physique!
Oh yes .. for sure it’s a very physical discipline this work.
Hi, what is the maximum torque on yours Milwaukee Fuel ratchet? And what model exactly? Thanks!
They look a pain in the posterior them DS3's 🎉 no messing about when kevs on job hit that sub button for him guys and girls not far off 100k
Nearly there 🥳🥳
Good 👍
Thanks 🍻🍻
01:51:28 What is the name of the tool you use to knock out the axle? It's looks like chisel, but i can`t find it in Google)
Or this is handmade tool?
It’s home made from old parts.
👏👏👏
👍👍👍!!!
👍👍👍
These cars from france..i dont know. So much strange engineer work
Tell me about it. .. 🤪
🏆🏖🏝🥳
Belle video,mais en choisissant autre chose qu'un bus Volkswagen,vous vous seriez épargné tout ce travail,cette marque étant réputée catastrophique concernant la fiabilité des divers composants.Bon courage pour la suite..bientôt le moteur ,puis l'électronique!!
🔝
Thank you
Hey 💪🍻
Holla
what is the average temperature there during this video?
It’s always on the weather app for that day in the video.
Are you ex military, the execution of your day from the weather, route planning and expert mechanics done with surgical precision is nothing short of a special ops field exercise..
Thanks for the feedback. Very much appreciated 🍻🍻
😊👍
🍻🍻
clutch vw passat b5.5 1.6 petrol, you did it?
Have a look in channel’s playlist.
What brand swivel impacts?....
It’s a MAC tool.
🙋♂️🙋♂️
better than F1 mechanic
Thank you.
The ds3 looks a bit tight for space and fiddly
I find that a lot with most French manufacturers. The layout is a bit not well thought out.
@@WMCS I agree. I think psa stuff is the worst. Renaults I can deal with but still rather do a fiesta or corsa 😂
You don’t p155 about Kev 👍🏼
I try not to 😁🍻😆🍻
@@WMCS haven’t even heard you swear 😂😂
In this humid country, we don't see you working with stuck screws, it's almost a miracle, English. where are the sledgehammers and chisels...,where are the ancestral root mechanics
The beast can be tamed … no violence required 😎🍻🍻
Poor DS
🫡👍🇸🇪
bravo
💪
🍻🍻🍻