A beautiful System. I used the Deye 12kw version with 4x4,8kw Dyness A48100 and works great. Thx Deye for this perfect Hybrid-Inverter. I come from Germany ;-)
I am interested in the SUN-12K Hybrid inverter but have a question. Can the SUN-12K-SG04LP3 3 phase inverter be used together with a 1 phase Microinverter (E.g. SUN2000G3) on the GEN input, or is it only possible with 3 phase input on the GEN Port ? (with Micro Inv. Setting) If it is only possible to use 3 phases on GEN port, do the phases have to be symetrical or can they have different wattage ?
Hi，if selected, when Battery SOC is less then “Low Bat” value, the self-consumption power of inverter will be from grid and battery simultaneously. If unselected, the self-consumption power of inverter will be mainly from grid.
What is the difference between home loads and backup loads. and why at the zero export to load situation dont need the ct's and from the other situation needed?
backup loads are loads that can be powered solely by the inverter from PV + battery when there's no grid. most inverters, PV arrays, and battery systems aren't big enough to power every load in your home, so you have to pick which loads you want the inverter to power when there's no grid power. home loads are everything that's not backed up. in a typical install, you'll have a transfer switch that allows you to pick a handful or circuits in your home that can be powered directly from the inverter or from the grid's main connection.
Home load is non essential appliances that don't affect your daily living. Backup load is the one you want running 24/7 even in the case of power outages and throughout the night. Upon installation of the system, you need to specify what's essential and what isn't to the person doing the installation for you.
Power for backup load is passing through Deye inverter so there's no need for external CT sensor. Power for home load is NOT going through the Deye inverter. But Deye is able to output power via the input port. You need external CT sensor for zero export mode because otherwise Deye doesn't know how much power is needed for your home load.
@@IgorYegorkin from what I understand, the AC/Grid Input also acts as an output to power home loads in addition to the load port that powers the backup loads ?
@@IgorYegorkin 1. could you please explain a bit further as to how the CT would detect and push power when the grid is on & off 2. When the grid has no power does it automatically detect no power and power up home loads without feeding the grid ? 3. Does it need any additional ATS to be installed ?
In some cases we couldn't sell to the grid. It will be nice to have such cases described. For example I am not able to get appropriate license for now in particular location, but I still need to use this invertor as a backup. Nothing horrible will not happened but everything to the grid will be treated as consumption of power.
Hi, Is it possible to change battery charging/discharging periods remotely? The best way would be to have some binary inputs for starting charge/discharge, to be able control this according Nordpool values
Is it possible to set my inverter to power the loads from solar and battery, and only take from grid to power loads when batteries reach a lower level? Reason being I want to only use power from the grid (to power loads) to save not buying power
ZeroExport to Load = Give all power to LOAD port . ZeroExport to CT = Give all power to LOAD port and additional power send on GRID port but LESS THEN CT SHOW a consumption - means you can have a heavy devices/engines before deye and inrush current will be from grid and deye will give them some power but not all to prevent sell.
timelapse 5:40 when using Zero Export To CT and Time Of Use mode the video shows that Home Load is powered by a battery. Rewatched several times... How is this possible? Is this possible when the GRID is Off
I want my batteries to be charged only by the PV and never from the grid. So when my batteries discharge to 20% ,they stop discharging, and the load only gets power from the grid, i dont want the grid to be cahrging my batteries and providing power for the load simultaneously . Can this be done , and how? My inverter is Deye SUN-40K-SG01HP3-EU-BM4
Hi! I have a DEYE SUN-10k-G (grid tie), how many strings of PVs this inverter can hold? currently i have 2 strings connected of 5-550w panels each. I plan to add another 2 strings to max the harvest. If i can still add 2 strings, can I use higher capacity rating PV, like 680w 0r 720w? my roof cant hold many more PVs that's why. thanks!
Good afternoon, can you help me with this problem.I have a 10 kw 3 phase Deye inverter.I connect a 7 kW car charger, one phase.12kW solar panels (there is a lot of output, the inverter at the same time reduces the power of the panels).In this case, the following happens:the production of panels goes to zero, pulls 6kW from the battery (200Ah charged) and 1kW from the city network.Previously, I did not take it from the city network when charging the car.Is there something wrong with the inverter settings?
What is the sense of charging battery from grid to 80 % starting at 1:00 am and dicharging battery at 5.00 am ??? Battery life depends on charge cycles...
Hi! What if there is no power supply from grid (blackout) during 10:00 to 15:00, does the hybrid inverter capable of providing power to home and back up load and charge the battery simultaneously in case the PV power is sufficient?
During the night, my inverter use the grid to charge the batteries! This is insane . How can I modify the settings, in order to use the grid never to charge the batteries, but only to feed the house when the batteries are empty ? Thanks
ZeroExport to Load = Give all power to LOAD port . ZeroExport to CT = Give all power to LOAD port and additional power send on GRID port but LESS THEN CT SHOW a consumption - means you can have a heavy devices/engines before deye and inrush current will be from grid and deye will give them some power but not all to prevent sell.
@@SiBex_ovh thanks ...how about: one phase grid input to 3 phased Deye? Will this work?... Need much higher input than grid can provide me.., so will top rest of needed power from battery
@@nixagon When you have a 3phase Deye then your Grid (energy operator) must deliver 3phase, a generator must provide 3phase. Only via GEN port as MicroInvMode can allow 1phase line and this is only option for allow 1phase be used by 3phase Deye unit.
@@nixagon But maybe this not be working, bcs a Grid network is a center of frequency and Deye as MicroInverter is a necnter of frequency - both try set own zero point - this can be danger for Deye - please wirte with support first to confirm that can be done that way. You have better alternative, the same like a wind turbine with deye - wind turbine generate 3phase but it's must be changed to DC Voltage and then it's connect to Deye as MPPT2 and that way, Deye not check is this is a DC from one or how many AC->DC - this way is probably best but remember, the Deye can be power up from Grid/battery only, not from PV of GEN port and MIN battery Voltage must be always bigger to unit work
I have the deye sun 12k hybrid inverter. What is the correct setting to reach the following targets: 1. Use solar cell power to power the home load first, the battery second and send any exceeding power to grid(zero export to ct plus sell power?) 2. Use the battery, when power from solar is insufficient until 10% of battery capacity is reached 3. Do not load the battery from grid 4. If battery power is less than 10% and solar power is not sufficient, take missing power from grid to power the load Idea: battery should only be loaded by solar panel and should support solar panel to give the power to homeload until the 10% of battery is reached. System now should not use the battery, but take the load from grid, if necessary. Nex time when there is sufficient power coming from solar panel will power the home load and them recharge the battery. If battery is full send not needed power to grid. Thank you for your support
hello, i use deye 12 k 3 phases , i use a diy lfp battery have a passive bms and i use volts parameters instead of bus can , why the deye not respect set voltage at charge ? i need use solar sell and send to grid all is possible to limit the voltage at 54.8 v is my peak required voltage ; i have also a 8 k mono and this one alaos never stop dischage battery at 50.2 v as i require i used a voltronic before on at this point it was far better , the problem is voltronics are not so fast power ajustement to load ans also not very reliable and noisy
Saya ada masalah dengan Deye inverter 12 kw 3 phasa dan ini beberapa material yg saya Gunakan : 3 unit Inverter 3phasa/12 kw Deye inverter 48 pcs solar panel @550 watt " jinko" 15 pcs battery 5 kwh 48 vdc " Lithium " Delongtop " shen Zen Setting battery Lithium pada code batt : PYLON ( 01/19 ) Tidak bisa di setting : 00 . Semua berjalan normal pada setting "Lithium batt " mulai jam 7 pagi sampai jam 17.00 sore ,tetapi saat program masuk di jam 18.00 ,battery cuma terpakai 700 watt . Grid terpakai 1.600 watt. Beban : 2.100 watt . Pertanyaan saya kenapa batteri tidak bisa bekerja maximal padahal battery kondisi penuh . Mohon ada penjelasan dari " D E Y E "
I changed brand of inverter to Deye. I look at this video but it is too fast with no explanation of what's going on. Probably ok for experts. Useless for me to understand.
Home load is non essential appliances that don't affect your daily living. Backup load is the one you want running 24/7 even in the case of power outages and throughout the night. Upon installation of the system, you need to specify what's essential and what isn't to the person doing the installation for you.
if you are grid connected, back up load is a load that the inverter can power when there's no grid power (i.e., it is backed up). when your grid goes down, only the back up loads will work. the inverter has a maximum output (8kw, 6kw, whatever) and it's probably not enough to power all the loads in your home. for example, in my house, my refrigerator, freezer, and furnace are backed up by the inverter, things like my clothes dryer and air conditioner, are not, since the inverter can't provide that much power (and my batteries aren't big enough)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
A beautiful System. I used the Deye 12kw version with 4x4,8kw Dyness A48100 and works great. Thx Deye for this perfect Hybrid-Inverter. I come from Germany ;-)
Thanks for your support
Excellently done. Love videos that get straight to the point. You solved all my queries about my system.
Very nice.. just maybe better if You create a step-by-step presentation.. the things too fast change to follow..
Thank you for your tips
I agree please step by step
I agree. Please add the step by step presentation as a link on this video
this is one of the best inverter in the market well done with the explanation. thank you
Very good, thanks for giving me the information. I am your companion. I come from Vietnam
Great video, I needed the discharge battery information and this is a perfect explained - thanks
I am interested in the SUN-12K Hybrid inverter but have a question.
Can the SUN-12K-SG04LP3 3 phase inverter be used together with a 1 phase Microinverter (E.g. SUN2000G3) on the GEN input, or is it only possible with 3 phase input on the GEN Port ?
(with Micro Inv. Setting)
If it is only possible to use 3 phases on GEN port, do the phases have to be symetrical or can they have different wattage ?
can you come out an explanation how you came up with those percentages against time? Is that an optimum setting to extend battery life or what?
Please give us something about "low power mode" feature. Is it even working on Deye brand and in particular on a single phase sun-8k-sg01?
Hi，if selected, when Battery SOC is less then “Low Bat” value, the
self-consumption power of inverter will be from grid and battery simultaneously. If unselected, the self-consumption power of inverter will be mainly from grid.
What is the difference between home loads and backup loads. and why at the zero export to load situation dont need the ct's and from the other situation needed?
backup loads are loads that can be powered solely by the inverter from PV + battery when there's no grid. most inverters, PV arrays, and battery systems aren't big enough to power every load in your home, so you have to pick which loads you want the inverter to power when there's no grid power. home loads are everything that's not backed up. in a typical install, you'll have a transfer switch that allows you to pick a handful or circuits in your home that can be powered directly from the inverter or from the grid's main connection.
Home load is non essential appliances that don't affect your daily living. Backup load is the one you want running 24/7 even in the case of power outages and throughout the night.
Upon installation of the system, you need to specify what's essential and what isn't to the person doing the installation for you.
Power for backup load is passing through Deye inverter so there's no need for external CT sensor.
Power for home load is NOT going through the Deye inverter. But Deye is able to output power via the input port. You need external CT sensor for zero export mode because otherwise Deye doesn't know how much power is needed for your home load.
@@IgorYegorkin from what I understand, the AC/Grid Input also acts as an output to power home loads in addition to the load port that powers the backup loads ?
@@IgorYegorkin
1. could you please explain a bit further as to how the CT would detect and push power when the grid is on & off
2. When the grid has no power does it automatically detect no power and power up home loads without feeding the grid ?
3. Does it need any additional ATS to be installed ?
In some cases we couldn't sell to the grid. It will be nice to have such cases described. For example I am not able to get appropriate license for now in particular location, but I still need to use this invertor as a backup. Nothing horrible will not happened but everything to the grid will be treated as consumption of power.
this is what "zero export to ct" is for
@@JV-ro7vz without Sell checkbox :)
Can the hybrid inverter be used without batteries intially? I plan to add batteries later.
yes
Hi, Is it possible to change battery charging/discharging periods remotely? The best way would be to have some binary inputs for starting charge/discharge, to be able control this according Nordpool values
good gob.
u r the best comany ever
Is it possible to set my inverter to power the loads from solar and battery, and only take from grid to power loads when batteries reach a lower level?
Reason being I want to only use power from the grid (to power loads) to save not buying power
yes, this the TOU described in the video
Hola, gracias por el video. Me podrías explicar la diferencia entre zero export to load y zero export to ct?
Gracias!
ZeroExport to Load = Give all power to LOAD port . ZeroExport to CT = Give all power to LOAD port and additional power send on GRID port but LESS THEN CT SHOW a consumption - means you can have a heavy devices/engines before deye and inrush current will be from grid and deye will give them some power but not all to prevent sell.
timelapse 5:40
when using Zero Export To CT and Time Of Use mode
the video shows that Home Load is powered by a battery.
Rewatched several times...
How is this possible?
Is this possible when the GRID is Off
I want my batteries to be charged only by the PV and never from the grid. So when my batteries discharge to 20% ,they stop discharging, and the load only gets power from the grid, i dont want the grid to be cahrging my batteries and providing power for the load simultaneously . Can this be done , and how? My inverter is Deye SUN-40K-SG01HP3-EU-BM4
In the battery setting, uncheck "grid charge" option
what does IT system ground option do?
Hi! I have a DEYE SUN-10k-G (grid tie), how many strings of PVs this inverter can hold? currently i have 2 strings connected of 5-550w panels each. I plan to add another 2 strings to max the harvest. If i can still add 2 strings, can I use higher capacity rating PV, like 680w 0r 720w? my roof cant hold many more PVs that's why. thanks!
Can we use this inverter if net metering is not available in the DU?
Good afternoon, can you help me with this problem.I have a 10 kw 3 phase Deye inverter.I connect a 7 kW car charger, one phase.12kW solar panels (there is a lot of output, the inverter at the same time reduces the power of the panels).In this case, the following happens:the production of panels goes to zero, pulls 6kW from the battery (200Ah charged) and 1kW from the city network.Previously, I did not take it from the city network when charging
the car.Is there something wrong with the inverter settings?
What is the sense of charging battery from grid to 80 % starting at 1:00 am and dicharging battery at 5.00 am ??? Battery life depends on charge cycles...
In many coutries electricity is cheaper at some time frames.
good but there is a spelling mistake. "Grid" is written as "Gird"
Thank you for your reminder ❤
Hi! What if there is no power supply from grid (blackout) during 10:00 to 15:00, does the hybrid inverter capable of providing power to home and back up load and charge the battery simultaneously in case the PV power is sufficient?
yes
@@JV-ro7vz does it do it automatically ? Or an ATS or some switch needs to be in place ?
During the night, my inverter use the grid to charge the batteries! This is insane . How can I modify the settings, in order to use the grid never to charge the batteries, but only to feed the house when the batteries are empty ? Thanks
Uncheck the battery settings grid charge.
Whats the difference between home load and back up load?
ZeroExport to Load = Give all power to LOAD port . ZeroExport to CT = Give all power to LOAD port and additional power send on GRID port but LESS THEN CT SHOW a consumption - means you can have a heavy devices/engines before deye and inrush current will be from grid and deye will give them some power but not all to prevent sell.
home load = ongrid
backup load = offgrid
Good day. How to configure monitoring of Deye V-TAC SUN-XL02-A power optimizers?
can this work without PV panels?
Deye can power inself from GRID and/or Battery only.
@@SiBex_ovh thanks
...how about: one phase grid input to 3 phased Deye?
Will this work?... Need much higher input than grid can provide me.., so will top rest of needed power from battery
@@nixagon When you have a 3phase Deye then your Grid (energy operator) must deliver 3phase, a generator must provide 3phase. Only via GEN port as MicroInvMode can allow 1phase line and this is only option for allow 1phase be used by 3phase Deye unit.
@@SiBex_ovh "microinverter mode" suits me perfectly, thanks for your replies, appreciate it
@@nixagon But maybe this not be working, bcs a Grid network is a center of frequency and Deye as MicroInverter is a necnter of frequency - both try set own zero point - this can be danger for Deye - please wirte with support first to confirm that can be done that way. You have better alternative, the same like a wind turbine with deye - wind turbine generate 3phase but it's must be changed to DC Voltage and then it's connect to Deye as MPPT2 and that way, Deye not check is this is a DC from one or how many AC->DC - this way is probably best but remember, the Deye can be power up from Grid/battery only, not from PV of GEN port and MIN battery Voltage must be always bigger to unit work
when I turn on the electricity supply to the city, my voltage rises to 265 volts. what to do, can you tell me or help me set it up correctly?! thanks.
Hello,
Can I ac couple a 6kw deye hubrid inverter to a 10 kw sungrow inverter?
NO, your Deye must be bigger in Power then a ad couple unit.
please make video for battery settings
if i select load first and click time of use then same thing happen??????
Não tem esse vídeo em português Brasil?🇧🇷 😅
Hi, ist es möglich sowas auch in Deutsch zu machen?
I have the deye sun 12k hybrid inverter. What is the correct setting to reach the following targets:
1. Use solar cell power to power the home load first, the battery second and send any exceeding power to grid(zero export to ct plus sell power?)
2. Use the battery, when power from solar is insufficient until 10% of battery capacity is reached
3. Do not load the battery from grid
4. If battery power is less than 10% and solar power is not sufficient, take missing power from grid to power the load
Idea: battery should only be loaded by solar panel and should support solar panel to give the power to homeload until the 10% of battery is reached. System now should not use the battery, but take the load from grid, if necessary. Nex time when there is sufficient power coming from solar panel will power the home load and them recharge the battery. If battery is full send not needed power to grid. Thank you for your support
that is the scenario the video described. use "zero export to ct" and "sell power", enable TOU, and set the battery cutoff percentage to 10%.
If that worked for you can u please provide full details, @Tomminocka, where should we put the 10% and what items to tick in tou?
Mine when I connect alternating and solar at the same time alternating its tripping
hello, i use deye 12 k 3 phases , i use a diy lfp battery have a passive bms and i use volts parameters instead of bus can , why the deye not respect set voltage at charge ? i need use solar sell and send to grid all is possible to limit the voltage at 54.8 v is my peak required voltage ; i have also a 8 k mono and this one alaos never stop dischage battery at 50.2 v as i require
i used a voltronic before on at this point it was far better , the problem is voltronics are not so fast power ajustement to load ans also not very reliable and noisy
Hi, the floating voltage you set is the current maximum charging voltage. Is this what you set?
i hope someone can help me.. what seem to be the problem when my deye 3.6k it doesnt go to grid type 😢
Hello sir, please send a detailed description of the problem to our after-sales service email: service@deye.com.cn
excellent
well made
Hello, how can I update my Deye inverter firmware?
My screen stays on all the time. Is this normal??
No, there is a setting in display that has a screen timeout option.
Saya ada masalah dengan Deye inverter 12 kw 3 phasa dan ini beberapa material yg saya Gunakan :
3 unit Inverter 3phasa/12 kw
Deye inverter
48 pcs solar panel @550 watt
" jinko"
15 pcs battery 5 kwh 48 vdc "
Lithium " Delongtop " shen
Zen
Setting battery Lithium pada code batt : PYLON ( 01/19 )
Tidak bisa di setting : 00 .
Semua berjalan normal pada setting "Lithium batt " mulai jam 7 pagi sampai jam 17.00 sore ,tetapi saat program masuk di jam 18.00 ,battery cuma terpakai 700 watt .
Grid terpakai 1.600 watt.
Beban : 2.100 watt .
Pertanyaan saya kenapa batteri tidak bisa bekerja maximal padahal battery kondisi penuh . Mohon ada penjelasan dari " D E Y E "
Hi,please contact our after-sales service email: service@deye.com.cn
Comment fait on pour avoir un manuel en français ???
search deye's web, and change the language to france
Corkery Corner
Gird?
is grid not gird...
😉
In french please
It doesn't work like that, it's constantly drawing power from the grid, even though it's supposed to run on the sun and batteries
how is your inverter set up? Is time of use unchecked?
@@DeyeInverter_official load first, time of use activated, but it buys energy from the network
Same issue here. Setup for time of use and it is pulling from the grid and ignoring the time of use schedule...
maybe percentage is not correct than?
Check your CT/Energy meter is working correctly. This is what fixed it for me.
I changed brand of inverter to Deye. I look at this video but it is too fast with no explanation of what's going on. Probably ok for experts. Useless for me to understand.
I believe that is you problem. I just finished installing a 6kw hybrid Deye sistem. This video explained a lot I could setup the sistem really ok.
MINILAUREA X PROGRAMMARE
Whats the difference between home load and back up load?
Home load is non essential appliances that don't affect your daily living. Backup load is the one you want running 24/7 even in the case of power outages and throughout the night.
Upon installation of the system, you need to specify what's essential and what isn't to the person doing the installation for you.
Whats the difference between home load and back up load?
if you are grid connected, back up load is a load that the inverter can power when there's no grid power (i.e., it is backed up). when your grid goes down, only the back up loads will work. the inverter has a maximum output (8kw, 6kw, whatever) and it's probably not enough to power all the loads in your home. for example, in my house, my refrigerator, freezer, and furnace are backed up by the inverter, things like my clothes dryer and air conditioner, are not, since the inverter can't provide that much power (and my batteries aren't big enough)
Whats the difference between home load and back up load?