LG W2242T-PF LCD Monitor Problem.
HTML-код
- Опубликовано: 11 сен 2024
- Help needed for my LG Flatron W2242T-PF LCD Monitor!!!
Don't really know what's happening here and couldn't find any answer closed to my problems before I decided to take any actions of repairing this monitor by myself.
I'd owned this monitor for almost 3 years since Jan-2009 and it was on my wife's PC. She hardly use, maybe about an hour or two per day, and it's mainly for her surfing the web and so on, and she don't play any hardcore/graphical intense games.
This problem had occured about 3 days after posting this video up, and without a warning except an electrical buzzing sound from a Choke or a Relay behind the panel, since about six months of usage before I'd passed down to her, and I don't think the buzzing sound would cause this on 4:55 ~ 5:30. I had dismantled it to check the capacitors and none of them seemed to be bloated which I'd initially thought of to be causing this problem. I'd checked the ribbon cable leading from the PCB to the LCD panel and the backlight, no problems found.
So, what's the real problem here? Hope you guys can give some answers by leaving some answers in in the comment box below.
A very BIG Thank You for watching and in advance for your answers.
Check Signal Cable. Decoder to LCD screen Flat Cable connectors. Push in firmly. Possible contact problem due to greasy finger print or something. Not the power supply, but decoder board to LCD.
você descobriu qual peça estava com defeito na época? estou com um monitor da mesma marca e modelo com esse problema.
i think this monitor is sold out in 2017 but if you have problem like that, 1 step.. check 12 volt output from psu board using a multimater also test every diode, check 24volt output to inverter is every voltage ok? voltage parameter you can read on your psu board.. i bet its less power to inverter, replace 2pcs smd power mosfet inverter under psu board.. if all voltage to mainboard and inverter is good.. cleaning your lvds cable and flex cable using an eraser..
hey guys, i got the same monitor but i am not able to open it to try to repair it. in this video it is not shown how to open. it doesnt work to remove the frame with screwdrivers or plastic cards. Can anybody help me?
This is a bad way to do RUclips videos! Probably you have much time to waste.. if you want to show defect show it and stop, do not show all the tear down process, i first thought that this was a video solution and wasted my time.. :(
thats because u r a genius probably, who can t read the description of the video, ahhh, u ll gonna lose and waste many many years with that shiny brain of yours
man i shall do it one day i am behind this issue wait for months.
actually it is t-con board or timing control board "not t-com". Its just one of the possible reason another is the ribbon wire connecting to the LCD itself.
chanche the small capacitor 22uf on the monitor card and it works tested same problem .... change all the small cap ok
Mine is doing the exact same thing except mine is a 24" onn brand 1080p monitor but exactly the same i have checked every little thing i dont see any issues so i may take a chance and order a T-Con board did you eventually figure out this issue and fix it if so what did you do or buy to fix the issue?
Noped. Had actually bought or an upgrade to a new 32" Gaming monitor from AOC. Had fed-up to rectify what causes the problem. I will put up a video as soonest as possible about all my PC hardware that currently had.
@geraldlkc Oh, it is intermittent? Question: Is the relay the ribbon in 3:35? Is that what you are reffering to as relay? The ribbon?
@MegaRami92 LG W2242T-PF LCD Monitor Problem.
Hello .
Have you fix the display? I have a LG W2252TQ same problems. No bad Caps. Please you have a tip for me ?
Thanks
Dude,its display has damaged.i was having lg led monitor E2040T.for which problem was perfectly the same as shown in the video,from start to end.There is no any problem in its motherboard,i cross checked changing it's capacitors,crystals.but the problem remains the same.
So finally I purchased a new display,just to make sure for my judgement,and it worked absolutely fine.So I recommend to take a new monitor,as the display price is high.
hello !! i m facing the same problem on my AOC moniter please help !!
@XxBaTtLeToThEdEaThxX Apology for the late reply. I had forgotten to mention also to replace the VGA or DVI cable. Hope this helps.
Still have this monitor and while using it I think it decided to die today, it's on and there's no display-
@icepipe2 must be the silicone I/C chip and I cannot presumed it. Thanks for the tip. I will search around any 2nd hand store for any to bring this fella back to life.
do you know how to get it off power save mode
Plz tell me how dude
Have you tried using the VGA input instead of the DVI? Your video showed vertical bands of color. I have seen this with poor connection at DVI connector so maybe wiggling connector will change? If so maybe cold solder joint where connector is attached to circuit board. Try poking on components with monitor disassembled to see if anything changes while tapping on parts. Even though the electrolytic capacitors looked good in power supply there could be a bad one letting ripple through
He tried even without any connection...
Similar problems on LG e2411 except just get shadow in random places does not work at all using DVI only VGA caps look ok but I don't have a meter , I reckon it's a voltage problem the HDMI negotiation doesn't work
I didn't understand where is solution, I have same issue with my monitor, can you tell solution to solve it
maybe are the flat cables over the panel or the flat cable from the video card, or a faulty chip on the video card, all about the video signal.
Mister Buzzer..the blue thing, it's a polypropylene capacitor.
@MegaRami92 Thought IF your problem is exactly the same as mine, then I assumed that it would be TFT panel to be defective. But then again maybe not, it could be the circuitary component(s) as mine is intermittent if I dismantle and press them down, and turn back on again...still the results be the same.
Oh well, if i do have the time and pull myself away from gaming, i will try to rectify asap.
I have a similar monitor, I also have a issue to LCD, but not as bad as that one.
my monitor (flatron E1950) is with some stripes on the screen, what's wrong?
@geraldlkc why you have solution or someting?
It;s from the flat cable from the lcd driver to the lcd item.
Just stay away from lg products they are garbage. Had a nexus 5x ang lg watch style both dead in less than a year and a half.
wait isnt this a graphic card problem?
@ObsessedGeorge I don't think so. It's something to do with circuitary component failure. The problem was intermittent and most likely on the Relay, Regulators or Capacitors.
Anyway, I had taken down all the specifications on all the components for purchase and will replace them one by one. Once done, I will update its status, here.
How did it go
I've had my LG 23en43 for about to years and it did the same thing only worse. I can even see what the computer is doing. Do I need a new monitor or is it fixable
Hi, did you find the problem?
I have a LG Flatron E2290V that just randomly cuts out to a black screen. This is a replacement monitor after the original one I purchased started having crazy wavy lines all over it. LG has some major issues. They sent me the replacement monitor with the wrong power adapter. Another week goes by, I get the correct power adapter only to find out the new monitor doesn't work! The only good part about LG Customer Service rep has been great trying to get this resolved.
i hv a monitor that does that,, and when i opened it i found out that there are several belts that comes from an lcd small board and one of the belts was faulty ....if i touched it was getting back to normal aftr somtym or if i moved my monitor it goes bad again so i guess lcd replacement is the solution
How many hz does this monitor have
Lvds cable replacement mine had the same problem
@Gerald Lim KC I have the same problem. Have you found the solution sir?
Yes. I had eventually bought a new piece. Got not much knowledge on electrical even though I am an electrician. Hahaha.
@@geraldlkc What is the new piece? A screen, card? 🤔
@@sword8972 brand new monitor
same problem same model
Did anyone try to replace all capacitor on Power board and logic board?
Anyone engineer can figure out the problem?
read my answers.
How much it costs for repair??
У меня такая же неисправность много вертикальных полос и много цветов радуги и воняет чем то, маленькая плата где разъемы приходят с компа, на ней пробит был транзистор большей вертикальный черный такой после его замены стал включаться монитор, до этого не включался, рядом ещё одна микросхема, они рядом стоят восьминожечные, и рядом стабилизатор на 3.3 вольта, слегка поджаренный край, микросхема ближе на плате к двум электролитам она зажаренная весь верх не понятно какая, на вашем видео как бы видно её но тоже прочитать не могу сливаются буквы цифры не четко видно. до платы не могу добраться что на самом мониторе, болты не хотят откручиваться, я короче плюнул, а пущу ка я его на радиодетали матрицу выкину в мусорку, куплю новый монитор так лучше будет. Плату нашел на али-экспресс там цена 3 тыс руб, на авито за 1 тысячу руб монитор продают.
Была такая проблема - моник подарили с такой проблемой! Искал в инете совета все мастера даже если и знают в чем проблема - то ведут себя как чмошники! Думал матрас сдох - а проблема оказалась в обвязке мах17077 керамический кондер замкнул вроде. Когда так без напряжения прозваниваешь то на короткое ни че не звонится а вот когда подается напруга на этот кондер не исправный на нем ток как будто стекает на землю и к стати он почти не грелся без тепловизора не найти на ощупь. Может кому-то помогу!)
Removing the LVDS cables and clean them with a pencil eraser, then plug it again and test monitor
I think that this is panel failure dude. Maybe it's the panel that needs to be replaced. What's your status?
Hi
I have Lg w2243s just the same problem like on this video, can someone help me???
If you need i will send picture of screen.
Thank you
is lcd ok service code data out
This is exactly i am facing with my Philips 170S LCD monitor . anyhelp?
Qbits Day lcd capacitor problem
NI UNA BRO
Thank you so much
Também tenho o mesmo monitor com o mesmo problema, vou tentar limpar o cabo que vai na t-con e ver se vai dar certo
Marcus Agosti deu certo?
My monitor of the same brand, gets this problem after a long time of use, works well for more than hour and then starts this problem. I took the back cover off and plugged in a side fan for testing and the problem ended. Is it a heating problem? Because with the fan on behind the lcd the problem no longer occurs. So now I'm going to try to put a heatsink on each component to find out where the problem is or I'll install a mini 12v cooler to see if it works out because I want to close the monitor since it's working open. If I discover news, I'll be right back.
man that is not issue.
Have Same Problem, My Lg Flatron e1941, its panel Problem Better buy new than repair it, My panel model is BOE HT185WX1-300, BadLuck :(
Same monitor, same problem :(((
same monitor to
Same monitor same problem.Problem solved... i changed 3 capacitors the 2 470μf 25v and 1000μf 25v.Good luck to everyone
but they were in logic or supply?? and what is concerned voltage is it 3.3 5 or ?
I just opened up the same display, if you have the same you would know that only at the powersupply these type of caps are located. I quickly got the caps out and tested them with my lcr meter but they just seemed fine. After placing them back and searching for other causes I heard the coil on the display pcb (under the metal cover attached to the display lines). also the interval frequency of the coil hickup was the same as that of the misformd picture showing on the display. Still suspect the input voltages to be faulty and making that switching supply (coil) hickup. Still have to measure the voltage lines but was to lazy to get one of my scopes and just told my brother to buy new screens anyway.
Since a lot of people have this problem I will make some time soon and do some measurements trying to figure out the fault.
the problem with matrix
explain! please alexander
same monitor and same problem here :(
me too
read my comment. i shall fix and tell you if done
screen monitor problem
That's a shame, I have the W2242T too, it's about 1 month older than yours. It could be a problem with the decoding circuitry inside the flat panel itself, so it might be a write off. I was hoping mine would only need a new backlight after ~5 years, I hope the circuits don't go bad like in yours. I use it heavily, but put my PC to sleep whenever I'm away, so it probably does 8 hrs per day, but it does that EVERY day.
Mine purchase in 2013mine is not working from 1 month but it worked 7 years it is enough I have 20en33ts
@@Killer_Karan I got rid of mine about 5 years ago.
check STV signal on panel
Eu achei que eu tinha problema mental ate assistir este video...
u find problem? i have same problem
the problem is in the built-in t-con card that has the lcd, check the voltages a diode or smd resistor may be bad
Thanks 501 likes!
i thick the problem here mister buzzer stort circuity remove it and place the new one
same fault in phillips 174b lcd and i note thet if i touch one leg of crystal not other with a steel tweaser it worked fine. crystal in that case was 14.318 x and there is a genesis processor in that lcd i tried to change that from old sound cards but think they are all faulty. now the project is pending.
wnats crystal buddy?
Broken LCD panel
hai
need help please comment all possible ways to repair this because i am using the same pc and all the problems r exactly same as urs.
i have a doubt wheather it is a problem of panel because i dont know to check it. but everything is same like wat happened to ur pc please give some way to repair this please and if ur pc is repaired then please tell me how u repaired
and comment as fast as possible because i really need help
readmy reply. remove crystal then try to power on it shall not. then change wih high freq and see of ok than try to change the bios.
lg monitor and same problem 😭
i have the same problem like this but my monitor is not LG is iiyama
Muchas gracias
Hi
lcd t-con board is defective.
Achei que iria mostrar o defeito e falando no vídeo 👎🏽
8:41 Oh well done Gerald XD (I'm not hating on you, it was funny when it got turned upside down.)
@XxBaTtLeToThEdEaThxX Yours is software related (hardware not so possible):
1.Uninstall ur current graphic drivers
2.Reboot PC into Safe Mode by holding F8
3.Still in Safe Mode, open Driver Sweeper or CC Cleaner (if you have either one) to get rid of the 'residue'
4.Reboot PC into Normal mode and install the Graphic Drivers, and Reboot it again to see results.
5.Scan PC for any possible infected Malware, Adware or Viruses that may cause any unwanted Startup programs.
Hope this helps.
Hz???
wtf
@MegaRami92 Care to post a video response, please?
Bro please help same monitor same problem. What i do bro?
Swap t-com.
How do you swap T-con for this model?
All the film on T-con board use hotbar soldering technology to joint LCD panel
ffwallace Hot air Machine, just change the Control Ci in the Tcom.
First thing I noticed... MAPLE STORY! lol
you need to replace your t-com baord
Yaar kia dikhana chahta hai
Conten Celeng🤭😂😂
magaria
heate the graphic chip
GO BRAZIL A TIP OF GOOD LUCK
change ur display secreen solve ur problem
@swerder123 No...Korea dun suck, YOU suck...troller.
panal falti
Boli
WTF😸
FACK