Refill Samsung ML3310 SL-M3820 MLT-D205 MLT-D203 toner cartridge

Поделиться
HTML-код
  • Опубликовано: 5 дек 2024

Комментарии • 48

  • @viandant5
    @viandant5  11 лет назад

    It may be something relate with the charge roller. probably it's out of position. the long shaft side goes near the gear side. also check the ground contact inside the drum

  • @viandant5
    @viandant5  11 лет назад

    you can see the correct charge roller position at 7.45 minute in this video. verify the supports of the charge roller. hope it can helps you

  • @viandant5
    @viandant5  11 лет назад

    I can't help you without seeing the cartridge. but it must be something simple: a missing contact somewhere, probably between the charge roller and the cartridge. or inside the drum there is a copper contact, may be it's missed.

    • @esamazam534
      @esamazam534 5 лет назад

      The cartridge of the samsung ml 3750 -an electronic chip that install in the cartridge -I need to learned to reinstall the electronic chip(software)

  • @MrTaschkin
    @MrTaschkin 3 года назад

    На @бокавых крышках@ есть флажки @рычаг разделения фотовала@ как их правильно выставлять? Вперёд, назад или вниз? На что они влияют?

  • @bhushanpatil4286
    @bhushanpatil4286 9 лет назад

    Brother thanks for reply I have replaced the same chip as shown in that video

  • @marswood5859
    @marswood5859 6 лет назад

    Toners D205E are the same as the Xerox 3325/3315 toners? Only different are chips? Thanks you very much

    • @viandant5
      @viandant5  6 лет назад

      yes, they are the same

  • @mihinprajapati7442
    @mihinprajapati7442 11 лет назад

    bro...thanks for your rply .but it s not working. the problem is remaining same.(after adjusting the charge roller). paper is still come out dark black.. is their any other solution.???? suggest me..bro

  • @cpointpp
    @cpointpp 9 лет назад

    after refill is it require to change the chip of cartridge

    • @viandant5
      @viandant5  9 лет назад

      +Prasanta PATRA yes, you have to change the chip

  • @JeanOliveira19
    @JeanOliveira19 11 лет назад

    Thanks for putting the video I did not find any in Portuguese.

  • @esamazam534
    @esamazam534 5 лет назад +1

    The subject is very good -how to reinstall software the chip

  • @bhushanpatil4286
    @bhushanpatil4286 9 лет назад

    How/where to get/buy new chip? OR I have two samsung ml 3310 empty cartridge ,but I have tried to fill ink in one,if the chip is difective then can I use second cartridge's chip in that cartridge to test it? or not? Please reply

    • @viandant5
      @viandant5  9 лет назад

      no, if the chip has reach the end of its life you can't use it.

  • @imprimirexpress4998
    @imprimirexpress4998 9 лет назад

    the cylinder drum D205 D203 equals ..... drum can use the D205 in the D203 ....

    • @viandant5
      @viandant5  9 лет назад

      denilson arruda yes, you can use it. verify the gears are identical, with the same number of tooth.

  • @cpointpp
    @cpointpp 9 лет назад

    which cartridge is common and best of samsung printer as like 12A of HP

    • @viandant5
      @viandant5  9 лет назад

      +Prasanta PATRA you can try Samsung ML1660 type

  • @mihinprajapati7442
    @mihinprajapati7442 11 лет назад

    i have problem when i give the print after refilling the 3710nd cartridge. the paper is come out totally black. plz give me the solution.

  • @Jarillux
    @Jarillux 8 лет назад

    Thanks for the video...

  • @cpointpp
    @cpointpp 9 лет назад

    i have refill toner in samsung mlt- 205s cartridge fully and. changed the chip. it showing 100% but it prints faded. some alphabets are deep and some are very light. with same regular pattern in printing. Why ? whats the problem. plz suggest me.

    • @viandant5
      @viandant5  9 лет назад +1

      +Prasanta PATRA may be a low quality toner powder, the drum, or a developer roller not cleaned. the regular pattern it depend on which distance they are.

    • @devupadhyay58
      @devupadhyay58 8 лет назад

      its right...

  • @mihinprajapati7442
    @mihinprajapati7442 11 лет назад

    can u saw this solution by video...plz....i must need help...urgent..

  • @amit0356
    @amit0356 10 лет назад

    i dont have that chip is there any other method to start printer again it creating problem ....... it shows end of life of cartdrige please help...

    • @viandant5
      @viandant5  10 лет назад

      No, there are no other reset methods. you have to change the chip

  • @juanmedina5645
    @juanmedina5645 9 лет назад

    Excelente

  • @walidelhwary7164
    @walidelhwary7164 8 лет назад

    thank you

  • @SurajKumar-sz5xp
    @SurajKumar-sz5xp 6 лет назад

    thanks

  • @pragnaenterprise9960
    @pragnaenterprise9960 6 лет назад

    nice

  • @ashwiniprasadbag100
    @ashwiniprasadbag100 5 лет назад

    Sir when I refilled tonner it's making noisy and print quality very poor

    • @viandant5
      @viandant5  5 лет назад +1

      It's difficult to say without checking the cartridge. Try to dismantle and riassemble the cartridge again, check the toner roller contacts

    • @ashwiniprasadbag100
      @ashwiniprasadbag100 5 лет назад

      Thank you sir

    • @ashwiniprasadbag100
      @ashwiniprasadbag100 5 лет назад

      Sir any what's app number

  • @bhushanpatil4286
    @bhushanpatil4286 9 лет назад

    i filled ink as shown in that video but after insert it in printer it shows it empty

    • @viandant5
      @viandant5  9 лет назад

      have you changed the chip?

  • @kedarmaldad5009
    @kedarmaldad5009 7 лет назад

    good

  • @peterc.b.mkumbwa5358
    @peterc.b.mkumbwa5358 2 года назад

    The caps do not fit perfectly

    • @viandant5
      @viandant5  2 года назад

      The side caps of the toner cartridge?

  • @bhushanpatil4286
    @bhushanpatil4286 9 лет назад

    I have a printer samsung ML3310

    • @viandant5
      @viandant5  9 лет назад

      I think the chip is defective. the only way to cancel the empty cartridge error message is to install a new chip

  • @mihinprajapati7442
    @mihinprajapati7442 11 лет назад

    bro...thanks for your rply .but it s not working. the problem is remaining same.(after adjusting the charge roller). paper is still come out dark black.. is their any other solution.???? suggest me..bro

  • @mihinprajapati7442
    @mihinprajapati7442 11 лет назад

    can u saw this solution by video...plz....i must need help...urgent..

  • @omjadhao9956
    @omjadhao9956 5 лет назад

    thanks