I'm wanting to get a 9.75" EMG Noveske NSR Gen 4 RIS M-LOK Handguard for my Lancer tactical M4(not really lancer anymore functionality wise) going for a pdw build. Gonna get a collapsible spring loaded stock, that handguard, a 8.7" outer barrel, and gonna throw my acetech bi-frost tracer on there. Gonna look sick. Only about $300 to go
I ended up using a G&P forward assist. Didn't encounter any issue with the original MWS forward assist except the fact that I couldn't even remove it from the stock upper receiver lmao
Depends on the length of your inner barrel. There's a cutout for tracer unit in the AG one so there's less space you can extend the inner barrel. But honestly given how both silencers wobble while attached to the flash hider, I wouldn't recommend to put a longer inner barrel in it
Hello there sir I was planning to buy this kit but can I ask u if this lot accept the real buffer tube from ar15 ? Also if there’s any important that I need to know before buying this kit ? I’ve heard in the forum that one guy said this kit only fits the real ar15 buffer tube is that true ?
Yes, the buffer tube of this noveske kit is the same as the real AR15 firearm. For your second question, I would say you should also be reminded that you need a trigger box that fits the ambidextrous bolt release design, such as the Iron Airsoft trigger box and Dytac trigger box.
@@JLM_VA thank you very much well I have a real buffer tube from ar15 but when I was trying to install it to my noveske clone de it wasn’t fit and I ask one of my friend he told me only the dytac kit only fit the real buffer tube. So I can’t use any trigger box like dytac and guns modify trigger box also I see there’s a gap between the end upper and lower receiver? Is that only the issues besides of the hop up unit gap as well ?
![[건탱크] DYTAC EMG NOVESKE N4 컨버전키트 마루이 MWS용](http://i.ytimg.com/vi/bMzY59Sk6ok/mqdefault.jpg)
Awesome clone build. It's my favorite of all clone builds. I want to build one myself but I don't think I have the patience and money.
I'm wanting to get a 9.75" EMG Noveske NSR Gen 4 RIS M-LOK Handguard for my Lancer tactical M4(not really lancer anymore functionality wise) going for a pdw build. Gonna get a collapsible spring loaded stock, that handguard, a 8.7" outer barrel, and gonna throw my acetech bi-frost tracer on there. Gonna look sick. Only about $300 to go
Any links to either of the suppressors?
What did you use to buffer the rest of the space behind the tracer unit? I'm not sure if I should use springs or foam.
i used spring only but I believe you could use both
Were there issues fitting the original MWS forward assist? What forward assist did you end up installing?
I ended up using a G&P forward assist. Didn't encounter any issue with the original MWS forward assist except the fact that I couldn't even remove it from the stock upper receiver lmao
why did you censor the name of the other brand?
hows the noveske kit holding up so far? Any issues? Does the receiver wobble?
still working like a charm
So which one of the silencers would you recommend for someone who'd like to pass through a longer inner barrel? The AG or the RGW?
Depends on the length of your inner barrel. There's a cutout for tracer unit in the AG one so there's less space you can extend the inner barrel. But honestly given how both silencers wobble while attached to the flash hider, I wouldn't recommend to put a longer inner barrel in it
@@JLM_VA thanks, guess I'll just buy one of the HAO repros.
I want the black one for my mws so badly but that price is insane.
Lol, it's honestly one of the more cheaper kits.
Word
Hello there sir I was planning to buy this kit but can I ask u if this lot accept the real buffer tube from ar15 ? Also if there’s any important that I need to know before buying this kit ? I’ve heard in the forum that one guy said this kit only fits the real ar15 buffer tube is that true ?
Yes, the buffer tube of this noveske kit is the same as the real AR15 firearm. For your second question, I would say you should also be reminded that you need a trigger box that fits the ambidextrous bolt release design, such as the Iron Airsoft trigger box and Dytac trigger box.
@@JLM_VA thank you very much well I have a real buffer tube from ar15 but when I was trying to install it to my noveske clone de it wasn’t fit and I ask one of my friend he told me only the dytac kit only fit the real buffer tube. So I can’t use any trigger box like dytac and guns modify trigger box also I see there’s a gap between the end upper and lower receiver? Is that only the issues besides of the hop up unit gap as well ?
Which buffer tube do you use?
i think it's an angrygun buffer tube
What site did you get all these parts from?
JKARMY
@@JLM_VA is it only based in Hong Kong? Also, currently out of stock? Any other distributors?
How high is the mount?
The scalarwork mount in the video is 1.57" tall
@@JLM_VA thanks
Hey what flash hider do u use there
@@YANGJI_lol it's a Dead Air silence flash hider replica
@@JLM_VA can they be ship overseas
@@YANGJI_lol depends on the shop
Where did you get a sandman that would ship here???
I think JKARMY has it
@@JLM_VA yea but supposedly they won’t ship to the US
Assuming you’re CONUS I guess. You could be Canada or live somewhere else
@@ljm_2011 I am not located in US
@@JLM_VA it’s been such a biatch trying to get one here dude. PTS is taking forever to make theirs
What t2 replica is that?
I have already replaced it with a real steel but I think it's a sotac iirc
Is this receiver forged?
don't think so
Charging handle Brand is iron???????????
bj tac
@@JLM_VA thanks
This is air soft right?!
yep
Why will he not tell us where the other suppressor is from
Was told I couldn't disclose the name but you could find it online I'm sure, given that there's not a lot of options out there for this replica
Why did you beep the brands?
Not sure why it's censored but I believe it's an Iron Airsoft
@@CalicoTundra26 RGW + Iron Airsoft