Harbor Freight Daytona 3 Ton Jack Stands, Full Review, New Tool Day Tuesday! Locking Jack Stands!
HTML-код
- Опубликовано: 5 сен 2024
- Recall Notice for the older Harbor Freight Jack Stands - images.harborf...
Refund Information - www.harborfrei...
! ! ! DISCOUNTS ! ! !
Gas prices are high and I've been using the app Upside to save. You get cashback when refueling at selected gas stations and even some restaurants. Use promo code X9C5H to get an extra 15¢/gal bonus the first time you buy gas and use the app. upside.app.lin...
Outstanding review!!!! Cutting away that jack stand so that we could see a inside view was very generous! I love the new design however I always have a backup to my jack stands, sometimes a big block of wood! LOL Just to reassure me when I am under the vehicle.
Thanks!!! I typically use a 2nd set of jack stands and I almost always leave the jack still in place.
My jack stands are 10 inch diameter logs of hardwood. Have never failed.
My logic in wanting these particular stands is that HF presumably lost millions of dollars issuing all those refunds/getting bad press/etc. under the recall. I highly doubt they want to go through that again, and thus now have some of the most well thought out and robust stands currently available on the market. I’ll be buying 4 of these tomorrow
How do you like them?
@@aaronjackson9603 I’ve used them many times and still love them and feel very safe under them. Never had any problem at all
Good thing I found this video. Been under my car several times on the old recalled stands...
Thank you for this outstanding review! These are currently part of the Parking Lot sale for $27.99 😮👍🏽
good job Harbor Freight, in response to the recall, they add the double locking safety pins. makes me feel very safe using. I have the pro lift 6 ton double locking with same design as this. very safe and sturdy
Thanks for posting this. I had heard about the recall, but hadn't yet done anything about my old HF jack stands (which were on the optional recall list). Yesterday I returned them to the store and picked up these guys. It was an extra $10/set, which seems reasonable given the considerable upgrade.
Thank you for the candid review. Based on your review I bought them .
Great explanation and great cross cut view of how the jack stand works. I actually had a old HF stand disengage on me when my sons car was up on four stands. I bumped the lever ever so gently with my foot and the pawl disengaged. The car was then balanced on three stands. My wife saw it too. It can happen ! Hard to believe until you’ve seen it or have had it happened to you. Anyway, these new jack stands from Harbor freight are the Way to go now.
I really like these! I may have to go get them. I honestly think the set I have still been using is the recalled ones 🤣
What's nice about that lock key stoping the arm from lifting and releasing is you can carry the stand around with them set at the height you always use without them collapsing when you set them down or the saddle lifting up if you grab them by it. I have pinched my fingers in them when I move them because the saddle slides shut when you bump the arm while carrying them.
I know there is a little lock tab you're supposed to knock in when you assemble them but I do NOT because I like that they come apart. I've been known to used the saddle/rachet part in my press.
Great job showing how the mechanism works on these HF jack stands. I did not know they had all these safety features, I really like that. Safety 1st 💯
I have this style stand in Australia but the handle attached to the claw has a shear pin through the centre of the handles round bar that shears off if to much upwards pressure is applied to the handle while under load leaving the claw in its holding position and the handle spin free , a great design as i did break one pin but no failure of the stand at all ,
The safety features on those look very reliable i would definitely purchase them.
Oh, wow, Nice safety feature. I'm definitely buying a pair today. I did return my older set that was part of the recall a few years ago.
You are also the first guy to mention this feature. It was ignored by everyone else.
I returned the ones on the recall, even though I never had any issues with them. They issued me a card for store credit. I think these might be the replacements i get this weekend.
Buying a set of these tomorrow. Decided to Google some reviews and came across this. Thanks for the review!
After I had seen this video I do plan to head to Harbor Freight to check out and perhaps buy a set of jack stands. Thanks for your video.
If they would have made these like that to begin with, I would already own them. Unfortunately when they made the first bad design, I took mine back and bought some from auto zone that will probably be all I ever need. At least they are making them right, now.
I'm waiting to see these Jack stands at my harbor freight.
Nice. Thanks for the review. Wasn't going to buy till I saw they fixed the issue. Just bought a set.
I have a project to do on my kia forte changing the inner n outter front tie rods I just orderd a pair gonna try them out..let you know how good the work fr my project.
I needed a set of stands. I planned on buying a USA product. Then I found out that's nearly impossible. I bought these instead. Looks like a really great product but I still wish I could've found something locally that's a US product. Everything!!! is made in China these days.
Us made is over 250 dollars 😂
Extremely impressed. I know where I'll be getting my next stands
I have some Weaver vintage jack stands they are solid all around made back when all the quality stuff was made in America. Look the up Weaver jacks and jack stands
Over engineered big time. Good for Harbor Freight. I will definitely buy a set.
I just got a pair myself, I couldn’t say no to $30 for the pair got them on their hot deal October 15 2023 harbor freight 👍🏻👍🏻🤘🏼
I love the new design, got me a pair about a month ago. I trust them completely.
I keep watching for a sale below $49... I may have to cave in and just get em.
I still have two sets of the orange and white 3 tons, looks like it'll be a nice trade in.
I just looked at mine and there recalled.. omg
If my local HF ever gets these, my current jackstands are going to Goodwill.
Just got these and the low profile 3ton jack! That’s for the review!
I thought the only real issue with the old stands was that the pawl didn't have 100% engagement with the ratchet and thus could fall if the vehicle shifted, but otherwise they were decent stands.
HF really went overboard with the engineering on these replacements from the embarrassment of the recall.
These are great
I would absolutely use these. I will probably pick up a set net time I'm there. Thanks!
Great review,
Very good product ( i have the 6 Tonne version)
Fantastic channel, please post more ,👍💯
just bought some of those... they feel sturdy to me... thank u sir
Defenityl I use them and I will probably buy the six and 12 ton jack stands.
Was that stand that you cut away a hf stand ? Because that is not how the old stands worked. They had the teeth jamming against a cam, not a tooth. I looked at a few older ones including mine and no tooth was engaging. Looked to me like either a terrible design or incorrect installation. Either way, they got it right this time. And yes, as a long time mechanic, all stands had teeth engaging teeth.
Just bought a pair and I felt very safe using them.
Great review! However, bumping the handle while working under the car is very easy to do and there are other videos showing just how easy the old HF stands fail. Think about someone with a pry tool or swinging a hammer accidentally hitting the arm. The original HF Jack stands only required about 1/16" to 1/8" of movement before the jack would fall unlike the new one with much more defined teeth and safety pin. I cringed and felt sick when I thought about how many times I've put my life in jeopardy through the years with my old HF jack stands.
The pictures I seen of the really bad ones that were part of the recall hardly had any teeth. There are also RUclips videos showing some that have about half the thickness of the teeth that they should have. I'm guessing the molds for the ratchet arm were too badly degraded and they should of been discarded. Personally I cringe thinking someone wouldn't of questioned them and used them anyhow. Had I seen a jack stand like that I would of never used it. All of that being said, this is also no excuse for the manufacturer. After the recall there were jacks that split due to faulty welds, Harbor Freight recalled them as well, later to find out those hacks had just been misused and overloaded. Sadly there are other companies that sold the very same jack under their name and never recalled them.
I have a Walmart version of these not safe cause no pin 🫠, going to pick up a set tomorrow 🫡 and a Daytona cherry red Jack
I recently bought a pair of big red torin stands. The paw seemed like it didnt have even contact on the teeth
Cheaper than the Pittsburgh but a lot heavier. I guess that's fine if you're not driving them around.
Late to your comment, but for others, they do have a 3 ton aluminum now. Slightly more expensive but also much lighter and smaller.
wish they had a better chain to keep from losing the removable pin.
Looks like a pretty good redesign... I would use them.
So these upgraded ones are basically 20 bucks a piece. How much did the price increase from the old ones?
Huge improvement.
Gotta hand it to HF.
Does anyone know what the failure mode was on the recalled jackstands and what the cause was? Were the tolerances too great, allowing the ratchet arm to slide down off the teeth and pawl, or was there a material failure in the teeth which broke off? Just curious, I have a set of Jackstands from Harbor Freight, which aren't part of the recall... and would like to be able to inspect them each time I use them...
The teeth on the ratchet arm were too shallow, the manufacturer had been making jacks for lots of companies and the casting dies had worn out and were out of spec. They were visually alarming and both you and I probably would of never used the stands and took them back. People started testing other models after the recall and one fellow managed to overload his jack stand and split one of the welds on the side of the stand, so harbor freight did a larger recall to get them off the market. Other brands had similar recalls, they just didn't go as pubic as Harbor Freight did.
pubic 💀
Good stands
They did not want another recall! They went the extra mile with all this fabrication that I guess that’s why we don’t get so many coupons anymore lol
Is the Daytona tube jack stand 3 ton safe?
Looks good but I'm looking for 6 ton I have a van
The den of tools channel said they are coming out with six tons!
In other words, those claiming the car fell, obviously didn't use the pin. I'm looking for tools to buy my grandson who is about to get his mechanic certification. I want to get him tools that will keep him safe.
Thanks two stands 3 tons capaciti or one of 3 tons?
The rating on Jack stands is for the pair, the combined total.
Personally I would never buy a jack stand with a ratcheting mechanism. My 8 jack stands that I have all have a pin.
are they 3 ton per pair or per stand?
Jack Stands are sold in pairs and their ratings are for the combined pair. Harbor Freight does sell 6 ton and 12 ton sets of this very same design.
I don't understand why they don't make the ratchet teeths 1 inch deep.
That will ensure it never fails.
Heavy Duty… I’ve used a lot flimsier
Will they make these in 6ton
The folks in the store told me they were going too, but didn't say when.
@@1D10CRACY Looking forward to an increased height capacity of the jack. These at 16.x inches, pulling transmissions with a HF trans jack, there is no clearance. At the moment using 20+ years old Craftsman jacks that raise to 21.x inches (3 ton), but they're 20+ years old, would like to replace them for another 21 incher soon!
Why not just make a pawl with two tooth?
US Jack brand does exactly that. All USA made, but they are expensive!
Well, if the two teeth were on the same pawl, there's still a single possible point of failure at the hinge. Having a separate locking mechanism offers greater redundancy.
They sold Jack stands that failed that could have easily kill you, why would you trust them ever again 🤣 by rule of thumb they sold defective jack stands they will probably do it again.
Personally I trust nobody. But I am capable of looking at a jack stand and making an educated guess on whether or not it is built right. If you are buying a jack stand based on the brand name, you probably should rethink your plan. Most Jack stands are made in the same factory and just have different brands stamped on them.
Because they have redesigned them and they are now excellent compared to all the other chinese made stands. You can buy superior USA made stands from U.S. Jack, but you'll pay a LOT more. I trust these and I always have a backup method of support by adding a screw jack.
Misinformation. The recall get nothing to do with these jack stand
Nope, no misinformation here. I did not show the recalled jack stands, nor did I was say I was going too. As explained in the video, these were new jack stands designed and released shortly after harbor freight did a major recall of existing jack stands that were sold.