I Made A Few Mistakes On This One (8/4 Walnut)

🔥CNC WITH ME: www.cncwithme.com/
---
CNC WITH ME Network Instructors!!
‪@JamesDeanDesigns‬
‪@stlwoodworking‬
‪@Hinkleshop‬
---
🔥HD Beginner Bits (Jenny Bits):
➡www.cadencemfgdesign.com/prod...
➡Use code HAMILTON for 10% OFF!
---
🔥 CNC Machine I Use:
➡ Onefinity Foreman Elite: www.onefinitycnc.com/product-...
---
🔥My Dust Collector:
➡amzn.to/4bgFhQF
---
🔥Carveco Software:
➡store-us.carveco.com/?ref=HAM...
➡Use code HAMILTON for 5% OFF!
---
🔥Plug & Play Spindle Kits:
➡pwncnc.com/?ref=HD
➡Use code HAMILTON for 5% OFF!
---
🔥Roundover Bit I Use: toolstoday.com/v-12108-mrr110...
---
Lets make a bowl on our CNC machine using just regular toolpaths!
---
Some links are affiliate links. Using these is a great way to support the channel.

[@prestoncox]

This explanation is so much more clear. I made the “dice bowl” from your other video early on and just couldn’t wrap my mind around the explanation in the video. It was just so fast. I finally got it figured out, but this is so much more clear. Thanks for remaking it

[@HarresMakerShop]

Digging the new video format and background. Really nice bowl also.

[@BrettLamb3388]

The much more reliable way to do your outside profile would be to cut down around 1/2 an inch with the Jenny, then cut outside the line with a jigsaw or bandsaw, and flush trim with router or router table. Perfect results every time and much better on your cnc bits.

[@noahterrell3012]

New studio if fire!!!! Love the clearity of the video and the top down view and markers are cheffs kiss!

[@stonefinity]

Great project! I made something similar for the Vectric UGM last fall and the Extended Reach Uptown Jenny handles 8/4 material like a champ on the Onefinity!

[@Hinkleshop]

Great project Hamilton! I can easily see that bowl filled with chips or popcorn

[@bharkin1]

Love it, glad to see I’m not the only one to mess up…

[@ScottWagoner87]

Congrats on getting back in the shop! This new studio set is really great and the top down shot worked perfectly. Love the style

[@Originhouseproductions]

Very nice project!!!

[@stlwoodworking]

Great project.

[@tpsooner7816]

FantasS”s”tic video! Thanks Hamilton!

[@thanemakes5377]

Would roughing the outside edge first then doing a finish pass at the final size help the chip out?

[@JohnColgan.]

I don't know why you use Downtown Jenny and not Cody's Compression but. Downcut bits back scrape the wood. Not cutting into it.a compression bit has the last 1/4"turned into an upcut bit so cuts cleanly I to the wood. But still downcut to keep top edge cleZn