👍 But I waited too long to see lol. That button can come in handy for many things -- flasher on head lights. Add an emergency relay and use as a rear flash for when cars get too close to you or anything else you can think up. Good show.
use a inline crimp to fix the ecu wire before it pops out again. i wired my CDI so the engine kill still works.. it was important for me as a safety measure
i used two new pins and did a "u turn" so that the two black wires are connected. i found it easier to use a service manual instead of trying to cut and figure out which wire is what
My rtx those not come with kill switch on handle but got starter switch & emergency flasher! I took off lollipop mirrors & put in handle bar end mirrors black foldables 3 1/4 "- 7/8".
Hi bud. Thx for the video. Do you know where or how to connect a device to the ignition on cable or part? I bought a dual camera system and needs to be connected on the ignition on. The brand is vifio mt1. Thx ☺️
@@SmallEngineVelocity mine stays running. I found the black/white wire on cdi wasnt allowing me to get spark i cut that wire and it started but have to touch together to shut the bike off
👍
But I waited too long to see lol.
That button can come in handy for many things -- flasher on head lights. Add an emergency relay and use as a rear flash for when cars get too close to you or anything else you can think up. Good show.
use a inline crimp to fix the ecu wire before it pops out again. i wired my CDI so the engine kill still works.. it was important for me as a safety measure
I can agree for quick shut offs , but you are much more advanced than I am for sure
i used two new pins and did a "u turn" so that the two black wires are connected. i found it easier to use a service manual instead of trying to cut and figure out which wire is what
The way I did it was much more entertaining:) your right a wire diagram would have worked better
My rtx those not come with kill switch on handle but got starter switch & emergency flasher! I took off lollipop mirrors & put in handle bar end mirrors black foldables 3 1/4 "- 7/8".
I came here to see you drill the holes for the switch. So I can do something like it . Was it easy ?
0:22 scoot scoot scoot scoot scoot scoot scoot scoot
dont mind me just avoiding studying
Interested in the bulky handle controls if you ever swap them out 😎🤙
Probably this weekend they will go but I want to hold on to them for a week or so just in case I don’t like my changes
How do I mount highway pegs on 2003
Hi bud. Thx for the video. Do you know where or how to connect a device to the ignition on cable or part? I bought a dual camera system and needs to be connected on the ignition on. The brand is vifio mt1. Thx ☺️
Great video! I don’t have a zuma, not a ruckus, but I’m sure this will translate to what I’m wanting to do.
Now you just gotta install the front end kit and a new throttle
Hmmm maybe I will
What throttle and grips setup do you have?
Going to relocate the start button too haven't been able to get it to start since I bought it always kickstarted it. 😐😣Hope this helps me
Yea use the wires I figured out , let me know if it helps
@@SmallEngineVelocity I will keep you posted.
Bigger issue than I expected I have no power when the key is in the on position.
JR Racing card anyone? Thinking of going back to stock carb or does anyone know where to get the Throttlebody and harness for the new EFI Ruckus?
Can you help me I have a honda ruckus but it won't star I have a new battery and wont star..! Can anyone help me please
What you said it will not start , it turns over but won’t start or nothing happens
Nice mod bruv'
Nice mod
Sweet
How did you kill the power with key? I hook mine up the same way and won't shut off
I turn the key to shut off
@@SmallEngineVelocity mine stays running. I found the black/white wire on cdi wasnt allowing me to get spark i cut that wire and it started but have to touch together to shut the bike off
@@SmallEngineVelocity do you have a Facebook page to pm you?