How to Install John Deere Bagger Kit BUC10284
HTML-код
- Опубликовано: 7 июл 2024
- Detailed Instructions on How to Install BUC10284 Bagger Kit on John Deere Mower.
► Need help finding John Deere parts? We would love to help! Call/Text (806)621-2060
► Buy John Deere Parts - 247parts.com
► Buy 42" Bagger Kit BUC10284 - 247parts.com/BUC10284/
Mentioned in Video:
► How to Install Blades - • How to Change John Dee...
Similar Videos:
► How to Install John Deere Tractor Mower Seat • How to Install John De...
► How to Restore and Service Old Mower Deck • How to Restore and Ser...
► How to Polish & Restore Plastic & Metal - • How to Polish and Rest...
► How to Install Weather Enclosure - • How to Install John De...
► How to Install Bucket Holder - • How to Install John De...
► How to Install Mower Bumper - • How to Install John De...
► How to Install Mower Seat Cover - • How to Install John De...
► How to Install John Deere 15 Gallon Tow Behind Sprayer - • How to Install John De...
► How to Install John Deere Mower Seat Cover - • How to Install John De...
► How to Install John Deere Mulch Plug - • How to Install John De...
0:00 - Intro
0:40 - What Comes in the Kit?
1:57 - Install Rear Mounting Bracket
3:00 - Mounting Hopper Top Assembly
4:10 - Redesign of the Hopper
4:53 - Slide New Bags into Place
5:17 - Install Top Tube
5:35 - Install Lower Tube
7:25 - Overview
#JohnDeere #MowerSeat #MowerAttachments 
Авто/Мото
Just installed my new bagger system on my S240 and went very smooth. So glad I saw Sharon Robertson's comment about removing the standard grass chute on the mower deck. Looks great and even better, works great! Thanks again for the great video.
I'm a 70 yr.old woman and pleased to say with the help of your video I installed the bagging system on my john deere. I'm not sure of the correct term but I did have to remove the large shoot cover to get the bottom pin in.
Awesome! I am glad I could help and thanks for watching!
Nice job old timer
One thing you neglected to cover, which sharon robertson below ran into, is the metal deflector where the grass comes out. It needs to be raised up in order for the bottom chute pin to reach the hole. In order to do this, we needed to drop the mower deck all the way to the floor, pull the metal deflector out and up and it clicks up. Then the bottom chute fits in. Just wanted to throw that out. Other than that, fantastic video, everything else went on like a champ. Thanks
Thank you for the easy way you explain the process of installing…2 thumbs up..
Thank you for this video! I bought a used bagger for my church which is on a tight budget. My JD mower is an older model, and I couldn't figure out how to attach the chute to the deck. After watching your installation video, I figured out that I could drill a 1/4" hole in the front deck floater wheel support, and it fits very nicely. There's a little gap, but it's cleaning the yard wonderfully. Also, I relocated the pin on the upper part of the bottom chute, so that the two pieces fit together with less torsion. This is a great product, and your video was extremely helpful!
Excellent set of instructions. Took about 20 minutes to change blades and install the bagging system.
Awesome instructions.
With this guy you can't go wrong. He's on point 👍
Thank you and thanks for watching!
Clear, concise, to the point. Excellent video.
Brent... Just purchased my first JD X350 which makes these vlogs extremely helpful... thanks so much for taking the time to post them for us (me)
I am glad I can help and I hope you enjoy your new mower.
Thanks for this video! It was super helpful and I watched it with my 4 year old so he could help me put the bagger on our new mower. He says you're cool.
This is awesome! Tell your little buddy I said he is cool too and thanks for watching!
Awesome video. The only part we struggled with before watching your video was the bags were packed inside out and we didn’t realize at first why the bags didn’t fit all the way in flush and the top would not close😂 after we figured that out and put the bags right side in the information in your video about attaching the lower chute was extremely valuable. We did not need to remove any of the deck parts. There was a little lock symbol to pull the lower shield on the deck out to unlock and raise the lower shield which made installing the chute much easier. We have a brand new S120❤
Well I am glad I could help and I hope you enjoy your machine and bagger!
Excellent visuals, pacing,instructions....one of best DIY videos on any topic. Thanks
I have a s110 these instructions were incredibly helpful. One question. Is it necessary to change the blades the mower is brand new.
Thank you, sir. I just assembled and installed my BUC10284 ($419 @ Home Depot) using the instructions you provided here. You provided great information that made my job very easy.
I ran into a brief trouble spot trying to raise the metal discharge guard under the plastic discharge guard, but gave it a tug and it popped fully open, allowing me to get a nice, snug seal over the discharge opening. Once I got it properly positioned, I was impressed at how tight a seal it made.
Awesome! I'm glad I could help and thanks for watching!
Im having the same issue, I can't get the small metal discharge thing to raise high enough, what's the trick?
got it finally, and put on my 21 year old bagger from my L110, on to my S120, works🙂
Same issue, how did you get it to raise?@@Hofner54
@@Hofner54 if you haven't figured this out yet, on mine, you pull it straight out toward you about 1/4", then it will flip right up.
Excellent video. Thank you. Now, I will go and assembled my JD bagger kit👍
Excellent Video, thank you
Thank you and thanks for watching!
Very well explained. Thank you
Thank you and thanks for watching!
Thank you for the help I just bought mine and it helped me so much you're instructions were perfect keep being detailed for us slow folks lol 😅
I am just glad I was able to help haha!
Thank you so much sir this video help me a lot
Awesome! I am glad I could help and thanks for watching!
Thanks for posting this
Our pleasure!
Thank you thank you this helped so much
Well I am glad I could help and thanks for watching!
very helpful, very well done. thanks
good recommendations that is important thank you
Glad I could help. Thanks for watching!
great job on the video.
Thank you and thanks for watching!
Very helpful. Thank you
Glad I could help!
Great video thanks
Thank you and thanks for watching!
That was awesome 👏
Thank you and thanks for watching!
Hey thanks for this video, I got the bagger kit without instructions used, and this really helped figure out I was missing a piece, that long locking pin with the clip in the video that keeps the bagger falling off, so ordered that part and were good now. Thanks Again. Sub'd
I went by Home Depot tonight and bought a bagger for my older JD D110 with a 42 inch cut. My yard is a tad over an acre and I'm so tired of raking leaves and pine straw in the winter. I sure hope it helps.
Thanks so much for this video. Just placed this in with no issues. S120 owner here. Just love your videos sir. 🎉🎉
Awesome and thank you for watching!
I'm saddled with the older BG20776 and forked over for the LP47167. I take it the BUC10284 is not compatible with the LP47167 since the later is discontinued? Think now I've got a rare item in the world of S240's! Note: the hand lever on the LP47167 finds low hanging tree and stout bushes very easily. I've fought that lower tube chute until exhaustion! Finally, it's in position! I appreciate that you too, Brent, had a time with the lower tube!
This is correct the new version of the LP47167 for the BUC10284 is now part number LP77180. Thanks for watching!
I have an older mower LA110, and I ordered a new lower chute. The one I got looks just like the one you installed. Will I install it the same way?
Great video ,was wondering do we have to change blades cause instructions that was the first thing to do but my mower is brand new ??
Great video, much better than reading the install directions. One question concerning the blades. I assume I have standard blades on my E110. Are the blades that come with the bagger mulching blades and can I just use these blades for cutting the grass and picking up leaves, or can I just leave the blades on that came with the E110.
The blades that come with the kit are high lift blades that help with bagging. Your standard blades will be better for mulching leaves and they will work with your bagger too.
I purchased this for my S140 with the 48” deck. The box says it fits this deck. Unfortunately JD left out the manual bag with the brackets but that’s another story. After getting them from a local JD dealer if found this video. It was a big help. However in my deck there is no bracket to fasten the rubber strap. Do I just drill. Hole in the deck?
I also have the chute kit, which was necessary to fit the tubes to my 42" S240. I noticed the blades are different in each kit. While both blade sets fit the 42" deck, the bagger kit blades seem to have less of a blade (sharp portion is longer in the chute kit). The chute kit mount hole is round while the bagger kit mount hole looks like a sprocket shape. They both seem to have the same angle. Which is better to use?
I would use the ones that come with the bagger kit. The longer blade will mulch the grass before it goes up the tube making it harder to be sucked up the tube. I hope this helps and thanks for watching!
This will fit the S120 ? Thanks
Is there any kind of rear baggier that is not so involved ? just want a baggier for quick on and off bagging only need some times a simple form as to this more elaborate style showed on line
Hello, I will be using this on my fairly new S100 for leaves. Will the stock blades work? Thank you and thanks for the video.
Yes they will but the bagging blades will create better suction.
Thanks for this video!! I'm 71 yr and I'm a visual learner. I got this on in less than 1/2 hour. You're a life saver!😊
Is it necessary to use the blades it comes with? I just replaced mine last year. Are they a special kind of blade for the bagger?
I purchased this for my S140 with the 48” deck. The box says it fits this deck. Unfortunately JD left out the manual bag with the brackets but that’s another story. After getting them from a local JD dealer if found this video. It was a big help. However in my deck there is no bracket to fasten the rubber strap. Do I just drill. Hole in the deck?😢
Questions:
Can you use this bagger attachment if you also have the tow hitch attachment already connected?
How much length and width does it add to the machine?
Thanks, great job on this video.
will this fit if i have a hitch attatched to the john deere?
Question.... mine came with two additional mower blades with a different angle. It was recommended to install to help with the lift of foliage Etc. Is this actually necessary or just redundant Parts in case my original blades don't stay sharp?
Do you know if it is possible to attach a bagger along with the mulching control kit? There are times I'd like to bag instead of mulch. I have an S220 JD
I have had this asked multiple time so I may just have to try it and do a video on it. Stay tuned!
Thanks bud this video couldn’t be more detailed. I appreciate it time to cut this grass.
Thank you and thanks for watching!
Brent, now that I have used the Bagger System I am very glad that I have it. The Bagger System has saved me a ton of hours from picking up leaves for mulching as well. Money well spent!
Question, would you advise against removing the Deck Spring Assisted Chute before installing the Bagger Kit? This would accommodate getting on and off the tractor from both sides while the deck in separated from the tractor and before installing the Bagger Kit deck attachment. This would be the ideal time to remove the chute if one intends to use the Bagger System year around?
You could but I like the idea of having it in place for safety incase you ever have issues with your chute coming lose from the deck.
Ok, I appreciate the response. Presently and as soon as things thaw out, I am getting ready to change out the blades per your video.
How did you get both of the flaps up while installing the bottom tube?
When mounting the lower tube to the mower, after getting the front pin into the hole, go ahead and put the keeper pin in the pin and the press the lower part of the tube into the deck track, it is much easier.
Good tip! I should have done this. Thanks for the feedback.
Will this bagger on on the John Deere S220 mower
1 question and 1 suggestion. Do you have to change the blades? And we had a hell of a time getting the cover of the deck today lock in to stay up so we can put the tubing on. Maybe show how to lock it up. Thank yahoo u for the video it was helpful!
You do not have to but the blades that comes with the kit will provide better suction and air flow to help send the grass back to the bags.
Do you need to level the deck again after the bagger is on seems like the weight on one side would cause it to be off a little
Yes this would be a good idea. Good question!
How do I install on a LA120? This may be an old model but there is no hole in the discharge chute for the pin of the lower tube. Looks like I need to drill a hole to receive the pin. Everything else fits great. Any advice?
Yes, drilling the hole is going to be the way to go here. Thanks for watching!
I need a bagger system for a JD 145. Where can I find a listing for that. Love the video
Looks like this bagger kit has to be ordered in pieces. If you call our customer support line listed on 247Parts.com and give them your model and serial number they should be able to look this up for you. Thanks for watching!
Are the bagger blades nessary to use bagging system?
I new to doing my own lawn in Florida. I just bought this bagger because of Ian coming through. I'm having a problem with the Metal Plate. The plate will not move up. I put a bungie to hold the plastic chute back. The only way I can get the leaf chute on is by removing the lawn chute/metal. Help, thanks Deb.
Well you shouldn't have to remove it. You should be able to pull it outwards and then just fold it back like you can do on your plastic chute.
I have an S170, will this bagger fit on a 48” Deck
Just installed this today ( 10-29-2022) on my 2020 S240. Unfortunately the hole that the lower chute pin goes into was not big enough to accept the pin on the lower chute.
I had to drill a new hole in the steel bracket to allow the lower chute pin to go through the bracket. Once I drilled the hole at a bit of an angle I was able to
install the bottom chute and complete the installation. Just be aware this could be an issue .
Interesting. Thanks for the tip for future buyers!
Hi. I just purchased an s 110 and the new bagger system. I just watched your video which was very informative. After the first use, I had grass clippings and debris all over my neck and back of my shirt. The grass and debris is comiong from where the lid meets the bags and also coming out of the top of the chute. Is there a seal or something that can prevent this from happening? Please help!!!
Rick.
Hmmmmm. This is a good question. I will have to do some research and get back to you on this one. Thanks for letting me know of this issue and thanks for watching!
Yikes! That's no better than my old bagger. That's why I mulch because I can never get a good seal in the back.
How do you keep the gasket in place where the upper tube goes into the bagger hood. Mine keeps coming of and during mowing my back is covered with grass clippings that escapes from the gap around the upper tube.
How do I release the shorter metal piece under the discharge chute?
Great video but you need to talk about the metal deflector how you need to left the back of it to get the lower tube in!
Very true, I should have done a better job explaining this.
This is where I’m stuck! I can’t get it up to save my life!
good stuff. just sub'd
Thanks for the sub!
I have a new S100 and the bagger kit, If it is necesary to change the blades?
Not necessary but the blades that come with the bagger kit will provide more air flow to push the clippings back to the bags. Good question and thanks for watching!
Does this fit the s220
I have one of these but find I have to clear the lower tube every time the bags are full, any advice?
I would be constantly looking behind to try to watch for those bags to fill and dump them before you ever get a chance of a possible plug. That is the best solution.
Great Video. Do you have a video for the S240 48" bagger - BUC10911
The single brace or catch that holds up the that top over the baskets .. I need to fix. The bolt is gone and holding that top up while trying to pull out n empty full bags is a problem for my arms.
That piece needs to be a certain way to work. I cannot see which way it needs to be on your video. What replacement bolt and what size do I need? I really need it working. Hope you can help.
What if I don’t have any where for the pin to go or have that groove for the chute to sit into
Attaching the lower tube to the mower’s deck has always been the biggest pain in the neck with my past two JD mowers. Looks like the apple doesn’t fall far from the tree on this model either.
I just bought a bagger system and there is almost a 1 inch gap between the deck of the mower and the lower chute, what is wrong?, should I return the bagger system?
Is the unit for x300 completely different?
So does the accel deep chut connect to this
Yes, the chute will match up to this hopper.
Will it fit on an X304 John Deere riding mower with a 42" deck?
No, the X300 series mowers have a completely different set up for the bagging system. You can reach out to us at 247Parts.com if you need assistance finding a bagger for your mower.
you should always tell people to pull out on the metal discharge cover to unlock and raise it before installing the lower shoot to the deck
Are there any rear baggers that fit the 300 series mowers?
Yes there are. For just about every model.
Should add the chute for the S240 does not actually fit. Bagger fits and upper chute no issues.
Yes, this can be a problem as the newer S240's have a different style of deck so they require a different bagger kit.
Bought it from someone and doesn't have support rod (gusset rod) 4:00 . Will it be fine?
Great video. Thanks for editing and keeping it short. Question....how do you get the metal deflector shield up and out of the way for the lower tube? I can't it high enough to attach the tube. You cheated...you edited that part out ;-) I just got my S120 and still learning about it.
It has a locking mechanism on it which is super finicky, buy you can cheat and use a bungy cord or multiple other things to pull it back and hold it while you get the lower tube on. Thanks for watching!
@@247parts Thanks Brent......finally got it. Had to work it a bit and pull up harder than I expected. Got it up. Very nice system.
I ran into the exact same problem, Brian. I first thought it needed to be removed somehow, but that wasn't the fix. All I had to do was give it a good firm yank to pull it up out of the way. It gave a out a good pop!, and snapped into the upper position, out of the way, making it easy to put the chute in place.
Doesn't fit the s110
Thank you!! Do we really need to install the blades they included? I’d rather not 🤞🏼- we’ll see.
You do not have to but it is recommended to get the best performance from the deck.
@@247parts thank you.
I just went into a different pasture and see that I’ve gotta pop em’ on.
Thank you so much !
Will this bagger fit my JD L-130 mower
No, because the L130 has the 48" deck.
This seems like it has a lot more metal in it than the one I got with my 300 series a little over a year ago.
It might have. The designs seem to change pretty often.
I am excited to have the new Bagger Kit system (no-tools-required), but the lid will not close down completely and latch. I noticed that the grass bag handles do not slide all the way into frame as shown in the install instructions. They protrude about 1 inch beyond the channels. I have re-assembled it several times without any success. What am I missing?
Problem solved. To my embarrassment I had installed the bag frames incorrectly. The bag frames are installed in my opinion looks upside down. That is made clear by Brent's video when he slides them in looking upside down. It would help us You Tubers' for that clarification in the video, otherwise, it is a snap to install per Brent's instruction!
Well I am glad it was an easy fix and thanks for watching!
Hello, Can you tell me how wide is the mower deck with this bagger kit?
I came here to ask the same question... did you ever figure this out? Thanks!
Where do you get a replacement support rod, the end of the rod with a hole in it, mounts to the upper bag support, the rod end broke. I can't find that part on any parts list.
Is this the part you are looking for? I had to search for the locking pin for mine, but the support rod is JDM67100 or ARI Sku: M67100
Will this bagger fit a 2021 John Deere S170?
No, you will need the BUC10826 which is very similar but the discharge tube is different. Thanks for watching!
Do you have to change the blades?
You don't have to, but the blades that come with the kit are designed specifically for baggers so they will help throw the grass through the tube and to the bags easier. Thanks for watching!
Does this fit the s240? I bought one from Home Depot last summer that didn’t.
No, it will take a different kit since the S240 has the AccelDeep decks and this specific kit it mad for the Edge deck. It will also matter whether you have the 42" or 48" deck.
I have the same issue. I bought this model because the video said it fit the 100 and 200 series but does not fit the S240. Do you happen to know the correct part number that fits the S240?
Do you have a video on how to do on the deep decks? I can’t get my tube on the deck to save my life.
Is switching out the blades required or optional?
It is optional. If you are going to mainly be bagging then I would swap them out.
I can't get the smaller metal deflector to raise up high enough to get the lower tube on the deck, on my old L110, you just pull and push up, but on the S120, I can't , what am I missing?
This is a good question. That should be all that you have to do. Is the piece best or broken anywhere?
@@247parts Got, had to tug hard, brand new I guess, my old 21 year old bagger fit fine, ty for all your vids
I have s240. My bagger is omuc26917. Instructions to install are not very good. Can you please do an install with this bagger?
I will if I can get my hands on one. Thanks for watching!
Deere website leaves a lot to be desired confirming the correct parts. Does this work on a 2023 S240?
No.
I have this bagger, could you help me out? Why is only 1 bag filling up?
This usually happens and then the grass will start spilling over into the other bag. If the grass is not spilling over than it may be a bit too damp when you are trying to bag. I hope this helps and thanks for watching!
So this will fit a E130 ?
Yes, it will. Thanks for watching!
What is the part number for a 48”deck?
It depends on what kind of 48" deck.
The only trouble I'm having is keeping the metal and the plastic grass diffusers to stay up by themselves so the lower tube can be installed.
Struggling to get the bottom chute in. Will absolutely refuse to go in because of the pin on the wheel. It does not look bent at all because the wheel is straight.
Edit: Trying this in my S130 42in
Sometimes that are a pain, and they take a little bit of convincing to get put into place. You are using the correct bagger for your mower, I know that for sure.
can you tell me the overall width of tractor with bagger installed? I have a d105
55 inches
@@twilson377thanks,, looking at the videos and pics it is hard to tell exactly. Now i know how big I need to make my fence gate. BTW-- not even John Deere inc could answer this.
when emptying the grass from the bag it only fills up the left bag and not the one on the right...
Can I use the newest bagger kit with the mulching gate system and mulching blades I have already installed on my S240, ID#1GSX240FJPP921776 lawn tractor with 42” deck. If yes please advise bagger kit part # and price. Thank you for your expertise and assistance.
You can but there are some pieces you would have to remove to make the material flow into the bagger. Would that be something you would want to swap everytime?