Thanks so much for showing the outside of the mill as well as the inside. I can picture my ancestors walking to work, the horse and carts bringing in the wool and bales of cotton from the canal boats. Before my orphan ancestor tried to run away and was sent here to Australia as punishment.
A very enjoyable video, showing well demonstrated and explained processes that were once commonplace in Lancashire. I served my time as an engineering Fitter at Platt Brothers in Oldham who were a big manufacturer of Textile Machinery. We had a large Development Department in which ongoing problems were looked at. One of these problems that you mentioned in your video was the length of time that it took for these machines to stop in the event of an accident. A solution (which was basically a disc brake) had been designed to stop the rotating cast iron disc inside a Coiler Top, (that wound the cotton into a spiral inside the cans). It did this extremely quickly and was deemed to be a success until one day the shaft holding the heavy iron spinning disc sheared off and the coiler disc flew out narrowly missing the operator. The solution was of course to reduce it's efficiency and accept a couple of seconds slowing down time. Helmshore Mill at that time had some connection with the development department at Platts and I have a vague memory of going there for just a day and being surprised that it was a stone built mill when all our Lancashire mills were brick.
Both of my paternal grandparents worked in a cotton mill in Floyd County, Georgia U.S.A. back when I was a child. This gives me a better understanding of how hard they worked and in what conditions. Like many other places, the mill is gone now, along with several hundred jobs. This is an interesting video, although I couldn't understand a lot of what was being said. Much appreciated just the same.
Very interesting, I feel really bad for the people who had to work in such a terrible place in the beginning of the industrial revolution, especially kids. Circumstances were so harsh and bad! I read the book by Robert Blincoe and got a lump in my throat.......if our ancestors wouldn't have fought for better rights we might have been in their place doing the rotten job.......I know almost for sure if I had lived over there in that century I would have been ending up in a spinning mill. We may have now a reasonable good life in 2022 but it's the ancestors who paid the price for it.......
@@ArnoldsAttic It doesn't seem to have any former mills around it so I wonder if it was connected to Helmshore Mill by an underground flue as used in North Yorkshire lead smelters! I grew up next to a brickworks that had a chimney some way from the kiln and the smoke of the coal firing had o travel through floor of kiln into the flue to the separate chimney! It's been years since I had a car and could visit all the museums and working mills. I made carding machines and worked roving, doubling and spinning machines and grandad worked a mule!
Thank you for the tour it was amazing
Glad you enjoyed it
Thanks so much for showing the outside of the mill as well as the inside. I can picture my ancestors walking to work, the horse and carts bringing in the wool and bales of cotton from the canal boats. Before my orphan ancestor tried to run away and was sent here to Australia as punishment.
You’re welcome. Thank you for sharing your story 😊
Amazing video ... now I can picture some of my ancestors working in Rossendale.
Thank you for your comment. Lovely to meet you - we both share a Lancastrian heritage :)
great video !!! .... reminisces of times gone by .... Thanks !!!!
Glad you enjoyed it :)
A very enjoyable video, showing well demonstrated and explained processes that were once commonplace in Lancashire. I served my time as an engineering Fitter at Platt Brothers in Oldham who were a big manufacturer of Textile Machinery.
We had a large Development Department in which ongoing problems were looked at. One of these problems that you mentioned in your video was the length of time that it took for these machines to stop in the event of an accident. A solution (which was basically a disc brake) had been designed to stop the rotating cast iron disc inside a Coiler Top, (that wound the cotton into a spiral inside the cans). It did this extremely quickly and was deemed to be a success until one day the shaft holding the heavy iron spinning disc sheared off and the coiler disc flew out narrowly missing the operator. The solution was of course to reduce it's efficiency and accept a couple of seconds slowing down time.
Helmshore Mill at that time had some connection with the development department at Platts and I have a vague memory of going there for just a day and being surprised that it was a stone built mill when all our Lancashire mills were brick.
Thank you for watching and thank you for sharing your memories 😊
Absolutely Brilliant when cotton WAS King
So glad you enjoyed it 😊
Both of my paternal grandparents worked in a cotton mill in Floyd County, Georgia U.S.A. back when I was a child. This gives me a better understanding of how hard they worked and in what conditions. Like many other places, the mill is gone now, along with several hundred jobs. This is an interesting video, although I couldn't understand a lot of what was being said. Much appreciated just the same.
So glad you enjoyed it. Thank you for watching : )
Really good video. Very clear and interesting. I really enjoyed it. Thank you👍👍
Thank you for your feedback Tina - Glad you enjoyed it! :)
My mum worked in this mill, she's 84 now. She worked there when she was 15 her first job..
Thank you for sharing Sara. 😊
Nice video!
I'm so glad you like it : )
Thank you. Please feel free to share it with your friends : )
Great Video. 😀 Very interesting. Hope to visit Lancashire some day.
Thank you for watching 😊
amazing museum that
So glad you enjoyed watching 😊
A very different type of cotton carding and roving operation from what Im use to seeing.
What are the machines like that you’re used to seeing? 😊
@@ArnoldsAttic The machines in the video are Roller Top Cards. The most common type of carding machine used for cotton is the Revolving Flat Top Card.
Thank you 🙏
Going like the devil is old saying for the speed these machines ran!
Thank you for watching 😊
I very interest this is my honor
Thank you for watching 😊
Man these machines are very complicated even today
Thank you for watching 😊
Very interesting, I feel really bad for the people who had to work in such a terrible place in the beginning of the industrial revolution, especially kids. Circumstances were so harsh and bad! I read the book by Robert Blincoe and got a lump in my throat.......if our ancestors wouldn't have fought for better rights we might have been in their place doing the rotten job.......I know almost for sure if I had lived over there in that century I would have been ending up in a spinning mill. We may have now a reasonable good life in 2022 but it's the ancestors who paid the price for it.......
Thank you for watching 😊
What mill has the chimney on the opposite side of the road?
I’m not sure. There’s lots of industrial history in the area. 😊
@@ArnoldsAttic It doesn't seem to have any former mills around it so I wonder if it was connected to Helmshore Mill by an underground flue as used in North Yorkshire lead smelters!
I grew up next to a brickworks that had a chimney some way from the kiln and the smoke of the coal firing had o travel through floor of kiln into the flue to the separate chimney!
It's been years since I had a car and could visit all the museums and working mills.
I made carding machines and worked roving, doubling and spinning machines and grandad worked a mule!
workers role in a cotton mill.... is there such a thing as a Trociter ?
Hi, thank you for the comment - you've got me stumped, I've not heard of that role in a mill. Thank you for watching - Katie : )
@@ArnoldsAttic Found it... it was a Twister !!
Ah yes! There certainly is a role called a Twister : )
I am working in textile industries but samtime job lees can you help me sar
How can I assist you?