I bought this too and installed it perfectly, also matched the Selfie Cam perfectly to the protector and I'm very happy with it. You even get tools to install it properly. I don't want to critizice you in any way, but the installation process is very easy. Samsung also provided a video on YT that shows How to install it. Except for one tiny bubble in the middle.
I have this and successfully installed it and it is working great on my s23 ultra. Its one of the few that works with the spigen tough armor case. The lines go away and it seems as if you'd had a cleaner set up then you may have had better results. Maybe try a steamy bathroom next time. The steam in the air pulls the dust from the air. Good luck. I recommend this product,
@wingriderrr I have dropped my phone a few times, I use the Spigen Tough Armor case for mine. I haven't had any major dropping accidents, and I have not had any cracks. When I have dropped my phone it's always been on the opposite side of the screen and landed on the back.... so I can't really say if it would protect from screen cracking. My case does that work for me, but it does help with scratches, which is why I have this film screen protector on it. I would say that a tempered glass screen protector would allow for more protection, but this seems to suit me enough.
What I do is wipe off the screen protector while it's still attached to the film and I apply it in my bathroom after a shower. The steam in the air minimises any dust. I too had some marks in the middle where you initialled attach to the screen, but after carefully using the card wrapped in the cloth I managed to get rid of them . Any others disappeared after a few days 👍
Installed mine with success on the first attempt. Made sure that the area I was working in was clean and used a screen cleaner before installing. Very happy and no single debris or bubble. Scan qr code and you have a well shown video on how to install it.
You need to use some screen wipes before starting as well. And more patience during application. Middle part needs to be applied perfect before you continue. Keep removing dust with the dust stickers before you begin the rest of the application. Also as you lift to apply the 2 sections, lift a bit more into the middle area and start pushing down from there. It will transition without bubbles. And at the end don't remove the front layer until you push out all bubbles, only then you can remove and press down the edges. I made a mess of the first one as well, second one was absolutely perfect, not one single bubble. But indeed it's not very user friendly to apply.
Remove the dust before application and also use the bathroom trick. All screen protectors will have bubbles if you do not remove the dust. The problem with this specific one is that you also need to remove dust from the screen protector itself since you put that on the phone.
It is wrong to rate it without doing it properly and not reading the manual. Clean your stuff, so you don't get dust under it and then don't worry about the bubbles or lines. It says in the manual they will go away after about 2 days and they do just that. After that, the protector is awesome. It even heals scratches in about 2 days. It doesn't peel off on the edges to get dust under it. I love it.
Weird title for the video since this screen protector is one of the best screen protectors available because do not interfere with the fingerprint reader and works flawlessly with S Pen. Installed before even start using my S23 Ultra and I am pretty happy.
I have the screen protector form Verizon and you can see every intention on the screen protector. It’s one of those self healing ones. This one looks like a better quality one. Ty for posting.
Damn, we are at that point where we are being sold high quality plastic. Samsung just had to make the screens curved. Like, when s23 ultra already has little to no curve, why not make it flat and let us get a good tempered glass protector?
@@iPat6G they're a pain in the ass. they are more vulnerable to shatter out of nowhere and the sides might come off if you use a case and the sides might not register if you use gestures.
I think the bubbles will fade after a few days. I have tried a couple of those protectors and they're great! Let us know if the bubbles on your screen disappeared.
Great content. Sorry for you getting ripped off. You should try Amfilm elastic skin screen protector. Cost less, no bubbles. And I can't tell it's on your screen. Had mine on my note20 ultra for over a year, and still looks like I just put it on.
Haha, I love testing different products, however, in my experience, I have had better installations and results with other brands for a lower cost. Thanks for the recommendation!
I bought it in my country for less than 15$. For both and I am really happy with it, fits perfect great quality and didn't have any issue with installation or cases !!!
The step when you use sticky paper to lift dust particles should be fast and on all over the screen and screen protector should be applied instantly .The more time you take , more chances are there for environmental dust particles to reappear on screen ruining smoothness of installation.
I got this for the S23+ and I can confirm the same bad final result. I got it almost for free using the promo voucher from Samsung so not complaining that much but if you have to spend your own money go with something better such as Spigen or Ringke offered at same price range. Probably a small grain of dust left created a bubble impossible to remove, same as in the video the middle strip supposed to help with the application is leaving some permanent defects at the sides.
I drank 5 beers and then installed this same protector on my s23 ultra. I have zero bubbles and zero specks of dust on mine. Can't even notice I even have one on except for the 2 lines from the center part but even they 99% disappeared by the next morning. Got 1/2 price directly from samsung for the 2 pack. I'm happy with mine
WhiteStone Dome glass screen protectors are the best a little pricy but easy to install and last ... They cause no interference with the fingerprint sensor and are molded to fit the curves of the phone ...
Same result here. Waste of money. Bought an 8$ one on amazon and got better installation procedure, 3 replacements and camera protector for less. Samsung didn't even accept to reimburse as they said it was past 48 hours. Problem was then I got the protectors 3 days before the phone so was impossible!
bruh for 30$ this is legit a scam, you can buy magic john screen protector for cheaper which comes with amazing installing thing which removes all the dust for you
I have the same screen protector for more than a month and I have no problem with it. The installation was easy and without any issues. Those two middle lines disappeared in a few hours. I think your problem was that you had to much dust on your table.
The Ultra23 has Gorilla glass Victus 2. I just traded my S20+ in which still looked perfect and it was Gorilla Glass. Screen protectors for this glass are an upsell in my opinion and take away from the aesthetics of the phone. Never had a chip or problem with no screen protector.
For me, the packaging itself is not dust-free. There's a lot of fine particles of paper that get transferred to the blue removable part of the screen protector and even after cleaning the screen itself multiple times, the dust particles fall on the screen from the protector itself. Bad result in both the protectors. Not at all satisfied.
Would someone honestly say if the screen protector lets you enjoy the screen as if there were no screen protector at all? I ask this because Ive never encountered a single phone with screen protector that had a 100% of the original screen view quality. Most screen protectors make the screen look like sht. And I dont see the point of having one of the the best screens that money can buy and then ruin the view with a screen protector
Would not recommend it, really? How can you not recommend something that was applied in the wrong way by you? Maybe you're the reason for your own disappointment?
My opinion was based on other brands I have applied to in the past that had a much smoother application process, for a cheaper cost, since the average user is paying for a premium product they should not have any trouble during installation, such as not even providing alcohol swipes, overall my purpose was not meant to stop customers form buying, but rather share the average user's experience with the product :).
I bought a screenprotaect from amazon witgvtge privacy screen and in my first try i got it done and i made 17$ cad. And its so amazing. I personaly feel screen protector shouldnt set you back 30$.
You did startoff OK but could have used a little more force but then you didn't apply proper pressure to the sides or use the squeegee to remove the lines or bubbles. This so hunan error I have this one my phone with no issues
There the best screenprotectors on the market but not for the Ultra with the curved display! For the S23/S23+ with flat display's these are really the best, i have it on my S23 and also on my previous S22 wich is a year old and the protector is still solid and the same as the day i installed it on my S22! I bought the S23 256GB lavender and gave the S22 to my girlfiend, so where both settled for at least 2-4 years depending how they keep up! 👍👊
I bought this screen protector and the edges are rough af so whenever I swipe from the edges it's not smooth and messes up the experience!!! I called them and they gave me a 10 quid credit! After a while you could easily make out scratches on the protector! It's not bad but for the price it's over rated. There are other protectors that work better and cheaper.
I didn't rate it bad because of quality I rate it bad in terms of installation. I even mention in my video this is a good protector if your really can get away with installing it properly but for the average consumer its takes some patience. 1. No alcohol swipes, 2. The frame they provided doesn't align the protector well should be a full screen frame rather than partial.
Why do not buy ? I think is the best screen protector which is working with S23 Ultra. Application process is easy, you need to use stickers to clean display, installed if for first time.
Bruhh 15 canadian $ isnt alot and you have 2 screen protector.. I paid mine 30€ (Ofc installed by someone but still)(not tempered glass but another type of material I cant remember)
PRO TIP: DO NOT 🚫 USE THE CLOTH THAT COMES WITH IT, AS IT DEPOSITS SMALL FIBRES ON TO THE SCREEN. INSTEAD USE A QUALITY CLOTH SUCH AS OMES USED FOR YOUR GLASSES.
Yall gotta stop being cheap when it comes to protecting your investments. I spent about 40-50 bucks on my last screen protector on my Note8. Case for about 30. NEVER had issues, and I have had some bad drops. I just traded in that Note for the Ultra and spent 70 on a screen protector(invisible shield), and 40 on a case. I have NO WORRIES about anything🤷🏿♂
I installed mine and was perfect from the first film, from the video I understood you didn't read the instructions at first place which caused the issue. 😂
You are not able to apply correctly. And there are lot of dust there on your table. I am using the same screen protector with absolutely no issues. And i am not so habitual of these processes.
It won’t ! Go tried it ur self ! If there’s dust underneath the screen which causes bubbles it will never go away! Poor quality screen protectors from Samsung !
@@ychu9432 I agree samsung could've made it better and I was able to remove the bubble but it was really hard thought especially on the curbes and mnaking the crease in the middle was a bit work to make itr go away
For environment purpose they removed the charger from the box and irony is for just a screen protector, they defy the same purpose and packaged it in a box. Lol 😆 🤣
Screen protector is truly trash 🗑 Took it off for a glass one, noticed i had a micro scratch.... again! S21, s22 and now the s23 ultra all had been micro scratched super easily. This might be my last samsung phone. Pshh.. smh.
Reasonable idea, truly awful application and result. The box is FULL of dust, making it practically impossible to apply without something getting underneath. Must try harder Samsung.
I agree, my screen had no particles after cleaning it, to was to the point where I was holding my breath to avoid any accidental particles. I have never had any issues with other brands even some cheap ones on Amazon.
You messed with the installation. It's a hydrogel film that AUTO FIXES the bubble thing after 1-3 days. You just don't know how to install it bro. I'll give that screen protector a 10/10 and your work a 0/10 to be fair.🤣
Agreeable, but other companies do make the process much easier l, for example they didn't provide alcohol swabs or even a full frame to align the screen protector. The half frame piece that attaches to the bottom didn't even help align the protector well.
![DRAGON BALL: Sparking! ZERO - Fused Warriors Trailer [BUDOKAI TENKAICHI Series]](http://i.ytimg.com/vi/84p4Lvyfyes/mqdefault.jpg)
I bought this too and installed it perfectly, also matched the Selfie Cam perfectly to the protector and I'm very happy with it. You even get tools to install it properly. I don't want to critizice you in any way, but the installation process is very easy. Samsung also provided a video on YT that shows How to install it. Except for one tiny bubble in the middle.
I have this and successfully installed it and it is working great on my s23 ultra. Its one of the few that works with the spigen tough armor case. The lines go away and it seems as if you'd had a cleaner set up then you may have had better results. Maybe try a steamy bathroom next time. The steam in the air pulls the dust from the air. Good luck. I recommend this product,
Thanks for the tip 👍, good to hear you were able to install it perfectly
Yes very good film!!
Does it protect the screen from drop like tempered glass?
@wingriderrr I have dropped my phone a few times, I use the Spigen Tough Armor case for mine. I haven't had any major dropping accidents, and I have not had any cracks. When I have dropped my phone it's always been on the opposite side of the screen and landed on the back.... so I can't really say if it would protect from screen cracking. My case does that work for me, but it does help with scratches, which is why I have this film screen protector on it. I would say that a tempered glass screen protector would allow for more protection, but this seems to suit me enough.
@@wingriderrr dont drop your phone its very good protect for scratches
What I do is wipe off the screen protector while it's still attached to the film and I apply it in my bathroom after a shower. The steam in the air minimises any dust. I too had some marks in the middle where you initialled attach to the screen, but after carefully using the card wrapped in the cloth I managed to get rid of them . Any others disappeared after a few days 👍
Installed mine with success on the first attempt. Made sure that the area I was working in was clean and used a screen cleaner before installing. Very happy and no single debris or bubble. Scan qr code and you have a well shown video on how to install it.
This screen protector is actually a 10/10 if you can install it right. It's probably the best one you can get for the S23U.
Yes ! he made many mistakes
Right !! He doesn't follow the rules of placing it properly and now blaming to Samsung for his point of failure 💯
You need to use some screen wipes before starting as well. And more patience during application. Middle part needs to be applied perfect before you continue. Keep removing dust with the dust stickers before you begin the rest of the application. Also as you lift to apply the 2 sections, lift a bit more into the middle area and start pushing down from there. It will transition without bubbles. And at the end don't remove the front layer until you push out all bubbles, only then you can remove and press down the edges. I made a mess of the first one as well, second one was absolutely perfect, not one single bubble. But indeed it's not very user friendly to apply.
Thanks for the tips, I agree 😅 I have always installed glass protectors and the process is always easy, this one a bit extra work and steady hands.
Mine had a few small bubbles, but they disappeared after 2 days and is flawless now. 😊
Remove the dust before application and also use the bathroom trick. All screen protectors will have bubbles if you do not remove the dust. The problem with this specific one is that you also need to remove dust from the screen protector itself since you put that on the phone.
What's this bathroom trick?
@@dramitjohari
In a steamy bathroom the steam will catch the dust in the air.
It is wrong to rate it without doing it properly and not reading the manual. Clean your stuff, so you don't get dust under it and then don't worry about the bubbles or lines. It says in the manual they will go away after about 2 days and they do just that. After that, the protector is awesome. It even heals scratches in about 2 days. It doesn't peel off on the edges to get dust under it. I love it.
Weird title for the video since this screen protector is one of the best screen protectors available because do not interfere with the fingerprint reader and works flawlessly with S Pen. Installed before even start using my S23 Ultra and I am pretty happy.
I have the screen protector form Verizon and you can see every intention on the screen protector. It’s one of those self healing ones. This one looks like a better quality one. Ty for posting.
Damn, we are at that point where we are being sold high quality plastic. Samsung just had to make the screens curved. Like, when s23 ultra already has little to no curve, why not make it flat and let us get a good tempered glass protector?
You can use a good tempered glass protector with curved screen too.
@@iPat6G they're a pain in the ass.
they are more vulnerable to shatter out of nowhere and the sides might come off if you use a case and the sides might not register if you use gestures.
Have you heard of Puregear 350 for the 23U? If so any good? Thanks
I think the bubbles will fade after a few days. I have tried a couple of those protectors and they're great! Let us know if the bubbles on your screen disappeared.
Great content. Sorry for you getting ripped off. You should try Amfilm elastic skin screen protector. Cost less, no bubbles. And I can't tell it's on your screen. Had mine on my note20 ultra for over a year, and still looks like I just put it on.
Haha, I love testing different products, however, in my experience, I have had better installations and results with other brands for a lower cost. Thanks for the recommendation!
Best of all ❤ protector.. tilasin just 4 varalle lisää näitä mahtava kalvo. 🔥 helppo asentaa. Noi viivat katoaa kokonaan muutamassa tunnissa 😊
I bought it in my country for less than 15$. For both and I am really happy with it, fits perfect great quality and didn't have any issue with installation or cases !!!
Good to hear !
Not the best quality but was nice to have in the mean time before getting dome glass Whitestone
The step when you use sticky paper to lift dust particles should be fast and on all over the screen and screen protector should be applied instantly .The more time you take , more chances are there for environmental dust particles to reappear on screen ruining smoothness of installation.
I got this for the S23+ and I can confirm the same bad final result. I got it almost for free using the promo voucher from Samsung so not complaining that much but if you have to spend your own money go with something better such as Spigen or Ringke offered at same price range. Probably a small grain of dust left created a bubble impossible to remove, same as in the video the middle strip supposed to help with the application is leaving some permanent defects at the sides.
I have no problems withe this screen protector
I drank 5 beers and then installed this same protector on my s23 ultra. I have zero bubbles and zero specks of dust on mine. Can't even notice I even have one on except for the 2 lines from the center part but even they 99% disappeared by the next morning. Got 1/2 price directly from samsung for the 2 pack. I'm happy with mine
Impressive 🤣, glad it worked out for you plus seems like you have better application skills 👍
I have the exact same product. Installed it myself, no dust, no bubbles. Cant really share your experience.
WhiteStone Dome glass screen protectors are the best a little pricy but easy to install and last ... They cause no interference with the fingerprint sensor and are molded to fit the curves of the phone ...
Same result here. Waste of money. Bought an 8$ one on amazon and got better installation procedure, 3 replacements and camera protector for less. Samsung didn't even accept to reimburse as they said it was past 48 hours. Problem was then I got the protectors 3 days before the phone so was impossible!
The bubbles usually go in a day or two. But used a glass one and that's perfect
bruh for 30$ this is legit a scam, you can buy magic john screen protector for cheaper which comes with amazing installing thing which removes all the dust for you
I agree, thankyou for the suggestion will consider checking that brand 👍
I just installed it. Amazing . I spend 1 hour for check out air bubbles 😅
I never apply screen protector myself I just go to local shop and they apply it for like 3 or 4 bucks its better than taking up the hassle ourselves
This screen protector works fine with me. I would say its consider one of the best sp out there for s23 ultra.
Glad to hear it worked for you, the quality is good, I just had trouble with the application process which could have been better on my side.
I have the same screen protector for more than a month and I have no problem with it. The installation was easy and without any issues. Those two middle lines disappeared in a few hours. I think your problem was that you had to much dust on your table.
The middle lines do disappear, but my OCD can't stand the slightest spec 😂
The bubbles disappear after a few hours as well as the line in the middle, I say this from my own experience.
The Ultra23 has Gorilla glass Victus 2. I just traded my S20+ in which still looked perfect and it was Gorilla Glass. Screen protectors for this glass are an upsell in my opinion and take away from the aesthetics of the phone. Never had a chip or problem with no screen protector.
Youre just covincing yourself
Micro scratches can happen with wear and tear which would bug me hence why I fit a Samsung Screen protector.
For me, the packaging itself is not dust-free. There's a lot of fine particles of paper that get transferred to the blue removable part of the screen protector and even after cleaning the screen itself multiple times, the dust particles fall on the screen from the protector itself. Bad result in both the protectors. Not at all satisfied.
Same here
Would someone honestly say if the screen protector lets you enjoy the screen as if there were no screen protector at all?
I ask this because Ive never encountered a single phone with screen protector that had a 100% of the original screen view quality. Most screen protectors make the screen look like sht. And I dont see the point of having one of the the best screens that money can buy and then ruin the view with a screen protector
If one can apply properly after cleaning, there are no issues. But yes, needs effort.
I am using the Official screen protector and it is working well.
Exactly, product is good in terms of quality I just had a frustrating installation experience.
Hello, could you tell me if the sides lift, after some time?
@@jrluizsilva1 No, all going well for now. I clean the fone display every week with solution, still protector is doing well...fixed good.
I can confirm the same. I bought 3 box of it for my s23 ultra thinking it was really good but it wasn't. 😢 wasted my money.
I feel you 🥲
Would not recommend it, really? How can you not recommend something that was applied in the wrong way by you? Maybe you're the reason for your own disappointment?
My opinion was based on other brands I have applied to in the past that had a much smoother application process, for a cheaper cost, since the average user is paying for a premium product they should not have any trouble during installation, such as not even providing alcohol swipes, overall my purpose was not meant to stop customers form buying, but rather share the average user's experience with the product :).
I bought a screenprotaect from amazon witgvtge privacy screen and in my first try i got it done and i made 17$ cad. And its so amazing. I personaly feel screen protector shouldnt set you back 30$.
Before Samsung sells phone with pre installed protectors now they selling to make more money along with charger too $$
I had the same dust and bubble problem. Samsung should apply this in factory. Let user apply it will absolutely generate much more plastic waste.
idk why people buy screen protector when they have frikin good screen
You did startoff OK but could have used a little more force but then you didn't apply proper pressure to the sides or use the squeegee to remove the lines or bubbles. This so hunan error I have this one my phone with no issues
Good to hear you had better experience with it :)
There the best screenprotectors on the market but not for the Ultra with the curved display! For the S23/S23+ with flat display's these are really the best, i have it on my S23 and also on my previous S22 wich is a year old and the protector is still solid and the same as the day i installed it on my S22! I bought the S23 256GB lavender and gave the S22 to my girlfiend, so where both settled for at least 2-4 years depending how they keep up! 👍👊
I bought this screen protector and the edges are rough af so whenever I swipe from the edges it's not smooth and messes up the experience!!! I called them and they gave me a 10 quid credit! After a while you could easily make out scratches on the protector! It's not bad but for the price it's over rated. There are other protectors that work better and cheaper.
I have the same experience with edges. It seems like it is just to narrow and do not fully cover sides.
@@sergiikotla4883 correct. It doesnt cover the sides properly even with my official silicon Samsung case. They should think about these things
This product is great!!!!
You don't have to rate it badly just because you have no idea how to do it right... you can see it in your video
I didn't rate it bad because of quality I rate it bad in terms of installation. I even mention in my video this is a good protector if your really can get away with installing it properly but for the average consumer its takes some patience. 1. No alcohol swipes, 2. The frame they provided doesn't align the protector well should be a full screen frame rather than partial.
I stopped using these screen protectors and cases a long time ago, once the new phone novelty wears off we don't care about these actually..
Why do not buy ? I think is the best screen protector which is working with S23 Ultra. Application process is easy, you need to use stickers to clean display, installed if for first time.
this a good screen protector, i'm typing also using the s23 ultra right now.
Good to hear you had a better experience, plus congrats 👏 it's a beautiful device 👌
Bruhh 15 canadian $ isnt alot and you have 2 screen protector.. I paid mine 30€ (Ofc installed by someone but still)(not tempered glass but another type of material I cant remember)
Also that screen protector is so soft
I agree / installed both and still got bubbles ! No worth the cost
PRO TIP: DO NOT 🚫 USE THE CLOTH THAT COMES WITH IT, AS IT DEPOSITS SMALL FIBRES ON TO THE SCREEN. INSTEAD USE A QUALITY CLOTH SUCH AS OMES USED FOR YOUR GLASSES.
I have one and have no issues whatsoever.
Yall gotta stop being cheap when it comes to protecting your investments. I spent about 40-50 bucks on my last screen protector on my Note8. Case for about 30. NEVER had issues, and I have had some bad drops. I just traded in that Note for the Ultra and spent 70 on a screen protector(invisible shield), and 40 on a case. I have NO WORRIES about anything🤷🏿♂
I installed mine and was perfect from the first film, from the video I understood you didn't read the instructions at first place which caused the issue. 😂
I watched the Samsung video tutorial 🤣, I have had better installs this was just not it
I use it myself. It works fine. I guess you applied it incorrectly.
You are not able to apply correctly. And there are lot of dust there on your table. I am using the same screen protector with absolutely no issues. And i am not so habitual of these processes.
Could be one of the factors, I have had better installations with other brands and never had any issues.
The bubbles gonna go away the next day
It won’t ! Go tried it ur self ! If there’s dust underneath the screen which causes bubbles it will never go away! Poor quality screen protectors from Samsung !
@@ychu9432 Yes it will. I used it on my s21 plus with the curve screen. The line in the middle and any bubbles gonna go away
Bubbles still there on my Phone.
@@ychu9432 I agree samsung could've made it better and I was able to remove the bubble but it was really hard thought especially on the curbes and mnaking the crease in the middle was a bit work to make itr go away
@@kwes1 the s21+ has a flat screen what are u talking about
Dont worry about bubbles these will go away
So you dont recommend it because you did bad installation
I had loads of bubbles, they go away after 24hr
For environment purpose they removed the charger from the box and irony is for just a screen protector, they defy the same purpose and packaged it in a box. Lol 😆 🤣
Screen protector is truly trash 🗑
Took it off for a glass one, noticed i had a micro scratch.... again! S21, s22 and now the s23 ultra all had been micro scratched super easily. This might be my last samsung phone. Pshh.. smh.
looks like dust not bubbles...
The video clearly shows how NOT to install the screen protector
Whitestone Dome Glass is the best hands down!
It is, but it only works with very few cases.
Reasonable idea, truly awful application and result. The box is FULL of dust, making it practically impossible to apply without something getting underneath. Must try harder Samsung.
I agree, my screen had no particles after cleaning it, to was to the point where I was holding my breath to avoid any accidental particles. I have never had any issues with other brands even some cheap ones on Amazon.
Am interested in it how much the price
Around $30 CAD
You just had a bad experience, i easily installed mine it was easier than others
Glad to hear it worked for you.
You messed with the installation. It's a hydrogel film that AUTO FIXES the bubble thing after 1-3 days. You just don't know how to install it bro. I'll give that screen protector a 10/10 and your work a 0/10 to be fair.🤣
Que referencia es?
i have this screen protector and it has no blister
Had the same issue when trying twice. Thx for nothing Samsung.
Do not buy because the RUclipsr dont have ability
세계 최고의👍 폰을 사용하는군요
Buy tempered glass
I agree I have always have good results with tempered glass these other ones just protect from scratches not major cracks
از کجا گرفتی اینو داش
This film is perfect you are not able to apply it! you made many mistakes!
Agreeable, but other companies do make the process much easier l, for example they didn't provide alcohol swabs or even a full frame to align the screen protector. The half frame piece that attaches to the bottom didn't even help align the protector well.
Na, na, na, it really works
It is shit. You get 2 in the box. First got SHIT, second got more shit :) Wasted cash
Wish I could thumbs down twice 😂
No alcohol wipe?
Sadly no