@@JinKeeI was thinking maybe have the fake liquid patch up the holes to still maintain the appearance of a broken mug without actually having open holes
@@tesseract5569 🤓🤓 I said frozen in time, not inanimate I mean a room with a cool paused scene, like things falling, wind, explosion, water splash.... whatever, all objects of interest being 3D printed
I feel like the entry side if the mug wouldn’t be blowing outward like that but I’m not 100% sure. Also the assembly looks really satisfying. You should make mug shot 3D puzzles.
Would look better if you used a clear wire for the effects portion because the metal sticking out of the front side looks off... but also making it into an actual functional coffee mug would be the best part of it all.
this would be so cool if you printed or modelled the coffee with clear resin coloured brown, it'd not only look more like coffee but also the clear colour would make it look like there's more dimension and movement
For future reference when designing bullets that have supposedly already been fired, you should just print the cap of the bullet as the casing breaks off once the primer ignites the gunpowder and the casting is ejected out of the gun.
If you look closely, there actually isn’t a casing on the bullet - the projectile is just really long for some reason. Edit: The 6.5 mm Carcano round looks a bit like that
With some minor modifications you could make the coffee blobs be the thing that holds the other pieces and the bullet without the need of wire, for a cleaner look.
This is incredible! In case you ever need to model a bullet again, the shape you printed includes the casing the bullet is fired from. The conical tip is the actual projectile. Amazing work!
@@niil047this bullet looks like it's inspired by a common 9 mm. Length of that bullet would be significantly shorter than what shown here, if it was modeled after a rifle cartridge, like 308, The bullet would have to be shaped differently in general. While not as egregious as modeling the full cartridge it just looks a bit silly.
it has roughly the same shape as old .45 caliber rifle cartridges minus the flat tip (.45-70, 45-90 etc.) if anything it looks almost exactly like a higher weight (150 grain or so) 30-30 Winchester. both of these are typically found only on lever actions, if I'm not mistaken the tip shape helps with feeding. it also doesn't look like a rimless cartridge either. the model is very much of a bullet, just an unusual/outdated one. it was probably a stylistic choice to have a longer bullet on this sculpture, i do think it follows the lines of the shrapnel pattern better.
Only criticism I have other than what people have already pointed out is that the entry wound wouldn’t look like that, the shards are positioned in the opposite way they should be. Regardless, still an amazing build and I hope to see more
@@fullmentalalchemist3922 I'm just gonna imagine 2 bullets being shot from inside by some tiny coffee people with one of the bullets being a long-boi (or maybe just 1 long-boi bullet and it was the shell that shot out the back)
Incredible how you can model particle explosions in blender and export it as a one frame STL to print with 1 click , seems easier than 3d animation since it's just one still frame
They made it easy to print off plastic bullshit that is barely interesting at best,and will just get thrown out once whoever printed it dies. It’s just going to leech into the ground water in some landfill. Great job making another machine that makes plastic garbage. What a change for the world.
The bullet is too long. It looks like you took the length of the bullet and the cartridge and just made them one piece. The bullet itself should only be about one third of that size for a typical pistol round, such as 9 mm, which is what this bullet appears to be modeled after. That being said, its still a bad ass piece. Well done!
This looks really cool especially if you make different colored versions of it like a neon blue or purple liquid or just a regular brown to look like coffee
Really awesome piece! I enjoy the shattered pattern you used for the point of entry and exits. However one critique I have is that the bullet should be flattened. Bullets don’t keep their smooth pointed bodies after leaving the barrel. Instead they flatten whenever they hit something. Even hitting a fragile liquid filled mug would change the shape of the bullet. I recommend looking up some slow motion channels to see how the bullet changes as it hits whatever target they’re using, as well as how the different densities of the solids and liquids would change the trajectory as well so it wouldn’t be entering and leaving in a straight line either. Other than that I would absolutely love to see this as an actual mug one day.
@@rachel705 “bullets dont keep their smooth pointed bodies after leaving the barrel” but i agree w that just dont think its a big enough deal to leave a paragraph
Not even comments on that he made the entire cartridge and called it a bullet but the issue I see is that is not how destruction via high speed projectiles works: The entry side would be pushed inward while the exit side would push outwards. In this case the front side would be blown in while the back would be blown out.
That looks amazing! I only have 2 criticisms though, first of all a bullet doesn’t work like that, when a cartridge is fired only the tip (bullet) comes out of the end of the gun. Secondly you should totally make it into a real mug because i would for sure buy it!!👍
@@orange8175577 tyrannosaur, 500 Nitro Express, and many other round-tipped long projectiles.. It's so easy to research before speaking what you don't know, just simply Google: Long Round Nose Projectiles. Literally on Wikipedia of the spitzer projectile there is a photo with a long round-nosed projectile! See: en.m.wikipedia.org/wiki/Spitzer_(bullet) . . Quero ver mostrar que não estou certo! 😎
Awesome project! Now this is something that could be an actual merch article for the "Wanted" movie, I mean it literally could have been in the ending scene (the bullet pierces an energy drink can and then flies right through a donut hole, so why not a coffee mug).
If you could make it like that but with nothing inside the mug so you can drink out of it - have your morning coffee or whatever, I would buy that forsure.
You gotta put this in the market, create different mugs with different liquid colors like coffee, cream, orange juice and sell them, it would be so cool
EDIT: This post was incorrect, due to material and the contents of the object, it is acutate that it would spray out of the entrance of the bullet, heres a link disproving my original comment followed by the initial comment I made. ruclips.net/video/jjUTZH_Vdxs/видео.htmlsi=K_UpRM33CSbuxeyH My original comment:"As small tip, the spot the bullet enters should be indented instead of outwards as that's how objects tend to behave when they're shot." This looks fucking amazing by the way Also here's a second example ruclips.net/video/dQw4w9WgXcQ/видео.htmlsi=Zp-g9MzKut-Cx27p
@@RewindMods yeah but to be fair we shouldn't expect everyone to have knowledge on ballistics, I don't want to discourage the art, it's very good. I just want to be helpful if I can.
Not a ballistics experts just an artist but i would've thought this was common sense. Had to check the comments to see if maybe I was wrong about the fact it shouldn't be going like that where the bullet entered
I want someone to make this an actual mug.
Feel like it would quite hard to drink out of or clean ngl but maybe just the shattering or smt
@@Sketchy_Doodmake the bullet be the handle. Gives you an undamaged side to drink from.
Coat the whole thing in a smooth surface of waterclear epoxy
@@JinKeeI was thinking maybe have the fake liquid patch up the holes to still maintain the appearance of a broken mug without actually having open holes
It is it literally just saw it
@@VenomFrogPwned okay now drink from it
"Here at Aperture, we shoot the whole bullet, thats78% more bullet, per bullet."
Your comment brought me a lot of good memories haha
Beat me to it
"Hello investors! Cave Johnson here"
I can almost here it; the absurdly cheerful, over confident and somewhat arrogant Cave Johnson's voice saying that line.
All guns shoot a whole bullet, do you think some guns leave some of the bullet in the casing ?
That bullet probably just saved your life because THAT is some potent coffee.
Newtonian Coffee?
Yo bro, you should definitely make a website/shop out of your cool creations, I wild absolutely love this as an actual coffee mug.
Yeah... That mug kinda crazy.
@@fusselised-slugcat yeah I guess you could say he got MUGged
First he has to make it an actual mug
Make a "Time Stop" room where everything is 3D printed and look like it's frozen in time
What??? So 3d print inanimate objects. All objects are inanimate already. I can't tell if you're joking or not but I hope you are
@@tesseract5569 🤓🤓
I said frozen in time, not inanimate
I mean a room with a cool paused scene, like things falling, wind, explosion, water splash.... whatever, all objects of interest being 3D printed
Is this a JoJo reference?
That would be awesome
@@tesseract5569Are you brain damaged
Bro took "mugshot" to a whole different level 💀
Underrated 💀
Literally 😂
yea that’s the joke…
☕🔫
Fr 💀💀
I feel like the entry side if the mug wouldn’t be blowing outward like that but I’m not 100% sure. Also the assembly looks really satisfying. You should make mug shot 3D puzzles.
Agree
Of course it wouldn't, can't have it on both sides.
agree 2
This is the creativity modern art needs
This is really impressive, could be in a temporary art installation imo
What does imo means
@@FatelessWonderer-qr8cu in my opinion
@@FatelessWonderer-qr8cu you can google ya know
@@FatelessWonderer-qr8cu it means “in my opinion” :)
😐
I'll steal this idea and make one at home, this is so dope.
Add bits of cotton balls behind the bullet to hide the wires and it will look like it’s breaking the sound barrier
Plz use an actual bullet and not the whole cartridge
make sure to make the bullet more pointy. that one looks like not bullet enough.
@@TheBejohns5 good idea. :)
Bakaj
@@vinxx6370
Would look better if you used a clear wire for the effects portion because the metal sticking out of the front side looks off... but also making it into an actual functional coffee mug would be the best part of it all.
I need this as my daily mug for my daily coffee
Oh yea imagine you get the whole thing dirty lol😂
@@ashon8617 John Whick Style 🥷
this would be so cool if you printed or modelled the coffee with clear resin coloured brown, it'd not only look more like coffee but also the clear colour would make it look like there's more dimension and movement
What this guy said
What this guy said
What these guys said.
What that guy said
What those guys said
Not me thinking the bullet was a whisk😂
Same
WAIT ITS A BULLET?
@@Pieandmarkersyes its called "mugshot"
💀
you're not alone
That one friend with lots of free time on a random Thursday:
That's crazy how creative you are...
Finally, an actually good *mugshot*
well done
Well done
Well done
well done
well done
This is the cleanest mug shot I’ve ever seen
Nice
Every part of this is super satisfying
I love how moony wasnt scared but sun was
Damn, an Aperture turret must've shot that mug. That's 65% more bullet then normal
No
Had me giggling in the library 😂
There are some special 45-70.'s that kiiiinda look like that but I'm 99% sure dude just had no idea what a bullet looks like without the casing
@@DumbArsea surprising amount of people have never seen a bullet without casing
@@PFnove
Or don't remember seeing it in 75% of action movies, and a couple of games
For future reference when designing bullets that have supposedly already been fired, you should just print the cap of the bullet as the casing breaks off once the primer ignites the gunpowder and the casting is ejected out of the gun.
This mug, however, was shot with a 66% more bullet per bullet
🔫 🤓
@haisai8289 That's crazy bro, but just one quick question, did I ask for your opinion?
@@haisai8289ikr imagine actually know how guns work so you can actually talk about them intelligently
If you look closely, there actually isn’t a casing on the bullet - the projectile is just really long for some reason.
Edit: The 6.5 mm Carcano round looks a bit like that
Bro's drinkin' symbiote
The way it fits is amazing!
Now make an actual mug look like this
Like some add on pieces? That’s not a bad idea actually!
0
1
2
3
With some minor modifications you could make the coffee blobs be the thing that holds the other pieces and the bullet without the need of wire, for a cleaner look.
The wire holding the bullet kinda looks like air trails or whatever they're called
@@idonthaveskill5054no it doesn’t
@@titanyt195 damn angy
@@idonthaveskill5054it doesnt though
@@titanyt195 no imagination-having ass
One of the best art 😍
Wow, excellent design
This is incredible! In case you ever need to model a bullet again, the shape you printed includes the casing the bullet is fired from. The conical tip is the actual projectile. Amazing work!
doesnt the casing have a lip around the back end, the bullet doesnt seem to have one so at least to me it just looks like a bullet
@@niil047 True, but bullets generally don’t extend that far back into the casing. That’s where the powder is stored, among other things.
@@keefstafro search up "high caliber bullet, alot of them are as long as the bullet they made even (or even longer)
@@niil047this bullet looks like it's inspired by a common 9 mm. Length of that bullet would be significantly shorter than what shown here, if it was modeled after a rifle cartridge, like 308, The bullet would have to be shaped differently in general.
While not as egregious as modeling the full cartridge it just looks a bit silly.
it has roughly the same shape as old .45 caliber rifle cartridges minus the flat tip (.45-70, 45-90 etc.) if anything it looks almost exactly like a higher weight (150 grain or so) 30-30 Winchester. both of these are typically found only on lever actions, if I'm not mistaken the tip shape helps with feeding. it also doesn't look like a rimless cartridge either. the model is very much of a bullet, just an unusual/outdated one. it was probably a stylistic choice to have a longer bullet on this sculpture, i do think it follows the lines of the shrapnel pattern better.
Really awesome piece of art-for added realism you could add rifling and mushrooming to the projectile
And no casing on the bullet
@@Yourmotherisrespectablethere is no casing to begin with
@@WheezyBeardLover i can see the ridge of the casing
And the"entry" for the bullet for the backside wouldn't point outwards, it would deform the mug inwards instead
👍 An excellent and amazing video. We highly appreciate it. Thank you.
What mugshot literally looks like:
Looks cool! Ditch the casing on the bullet and color the coffee brown instead of black.
here at aperture, we use the whole bullet, no need to be wasteful, that’s 78% more bullet per bullet!
It could be an old style rifle bullet
i didn’t see no casing just one long bullet
@@sammerritt730 or an aperture turret
@@hackerman1647 if you look at the 3-D print of the bullet, it was a small what looked to be a pistol round with the casing on it
Only criticism I have other than what people have already pointed out is that the entry wound wouldn’t look like that, the shards are positioned in the opposite way they should be. Regardless, still an amazing build and I hope to see more
And the fact the he printed a bullet with the shell included.
@@fullmentalalchemist3922im pretty sure this is what he meant by what other people have pointed out
@@fullmentalalchemist3922 I'm just gonna imagine 2 bullets being shot from inside by some tiny coffee people with one of the bullets being a long-boi
(or maybe just 1 long-boi bullet and it was the shell that shot out the back)
Actually, the entry wound would look like this. If you look at anything being shot in slowmo, that is how it looks.
An entry wound does infact look like this
It looks amazing
This might be the one of the best paper weight design.
I NEED this in my life
Bullets? Go to chicago
OK yeah but it’s 3-D printed so whenever you put scorching hot coffee in there it’s probably gonna melt
Do you know how a bullet actually fires you mor on?
@@CheeseMiser LMAOO💀😭🙏
@@CheeseMiserI Can confirm thats where you should go. I lived there for 8 years
“Mugshot”
Literally! 😂
does anyone really think putting a normal word in quotes make it funny
it does. now piss abt it and get outta ur feelings
@@vincentdreemurr sometimes it does
@@Eternal_Edge69this is not one of those times
Wow a *mugshot* and it’s a good one!
I Love this art
Bro really made the whole bullet flying through the mug 💀💀
78% more bullet, per bullet! -aperature science
@ashcorvus7004 why not come up with your own comment instead of taking it from someone else
@@kiidmarzgamez1602because funny
cry@@kiidmarzgamez1602
@@kiidmarzgamez1602it's a meme...
bro made a literal mugshot
Underrated comment
@@TheonlyBe_Like oh cmon
@@TheonlyBe_Likepeopole like it... I think
Dammit, you did it before I could lol
@@WanderingWind71 sorry
Incredible how you can model particle explosions in blender and export it as a one frame STL to print with 1 click , seems easier than 3d animation since it's just one still frame
That is actually so cool!
Look am just gonna say it, whoever came up with 3D printing machines… you have changed the world.
You clearly didn’t have to say it as that is a very obvious statement, Plato.
@@heathscarbucksnotstarfucks5473did you print yourself a peg?
They made it easy to print off plastic bullshit that is barely interesting at best,and will just get thrown out once whoever printed it dies. It’s just going to leech into the ground water in some landfill. Great job making another machine that makes plastic garbage. What a change for the world.
Thanks for stating the obvious
@@mrgoodcat899it was two sadly
This takes mug shot to a WHOLE new level 😂
I was just abt to say that💀
Wow that is amazing 😍
looking very good!
The bullet is too long. It looks like you took the length of the bullet and the cartridge and just made them one piece. The bullet itself should only be about one third of that size for a typical pistol round, such as 9 mm, which is what this bullet appears to be modeled after. That being said, its still a bad ass piece. Well done!
Was looking for some one else to point this out
Some old rifle cartridges from the early 1900’s had these kinda of fat, flat bullet.
@@stolyartoad8640u can see the primer so i think he just messed up cuz it look like a 9mm
maybe it a 6.5 mm Carcano round or something similar
looks real to me
The person who hated that mug so much was so good at weapons manufacturing he found a way to fire the whole bullet case and all
@@YesimactuallyspiderMan what
@@cardboardistasty I was just testing if I can comeant
@@cardboardistasty spider Getto spider Getto does some things a spider does watch out here comes the spider Getto
Idk man it looks like a normal bullet to me, a bit close to 6.5mm Carcano now that i think about it
Cave Johnson much?
This is the stuff you’d see in a museum,
Random, but beautiful.
Thats amazing!
Holy Shit, that looks cool
Lol realest comment
Dude you’re a genius for naming it “mug shot” you actually got me to laugh lol
Edit: mom I’m famous! 1.1k likes on a comment! Thank you all!
“Got me to laugh” Sorry gigachad
@donteereece2510 what
Ikr
very cool bro
It brought me back to when, Prey launched and the player didn't know if the mugs near them were mimics or not.
thats a cool mug😎💙👍
This looks really cool especially if you make different colored versions of it like a neon blue or purple liquid or just a regular brown to look like coffee
That gun shot the entire cartridge out the barrel 😂
I only see the bullet not the casing
@@somerandomguy3562goofy ass
I think this could pass as a .300 black out, or something similar
😂😂😂Bruh!
Bro you high?
Bro that SHI is cleannnnnn😮
That looks awesome
Really awesome piece! I enjoy the shattered pattern you used for the point of entry and exits. However one critique I have is that the bullet should be flattened. Bullets don’t keep their smooth pointed bodies after leaving the barrel. Instead they flatten whenever they hit something. Even hitting a fragile liquid filled mug would change the shape of the bullet. I recommend looking up some slow motion channels to see how the bullet changes as it hits whatever target they’re using, as well as how the different densities of the solids and liquids would change the trajectory as well so it wouldn’t be entering and leaving in a straight line either. Other than that I would absolutely love to see this as an actual mug one day.
Explain that to Mr. Kennedy
This is simply not true
They lose the cartridge but do not flatten when they leave the barrel
@@faded3657 No one said they flatten right out the barrel they flatten when they hit something. Most bullets are not particularly hard metals
@@rachel705 “bullets dont keep their smooth pointed bodies after leaving the barrel” but i agree w that just dont think its a big enough deal to leave a paragraph
Not even comments on that he made the entire cartridge and called it a bullet but the issue I see is that is not how destruction via high speed projectiles works:
The entry side would be pushed inward while the exit side would push outwards. In this case the front side would be blown in while the back would be blown out.
This is pretty cool bro
mug shot! clever af
That looks amazing! I only have 2 criticisms though, first of all a bullet doesn’t work like that, when a cartridge is fired only the tip (bullet) comes out of the end of the gun. Secondly you should totally make it into a real mug because i would for sure buy it!!👍
That is just the bullet
@@WesternWaster-2299 isnt it a full 9mm cartridge?
@@blazingfireyt3582 no, look at it
@@blazingfireyt3582 no. Looks like just a regular sized rifle bullet
@@kevinthielmann9408incorrect
Ah yes, the classic entire catridge shot
How many people do i have to tell DO YOU NOT REALIZE THAT BULLETS CAN BE LONG?
show me one bullet that looks like that@@Whatwhagwhawhat
@@orange8175577 tyrannosaur, 500 Nitro Express, and many other round-tipped long projectiles..
It's so easy to research before speaking what you don't know, just simply Google: Long Round Nose Projectiles.
Literally on Wikipedia of the spitzer projectile there is a photo with a long round-nosed projectile! See: en.m.wikipedia.org/wiki/Spitzer_(bullet)
.
.
Quero ver mostrar que não estou certo! 😎
@@Whatwhagwhawhatthe length isn’t really the unrealistic part lol
@@orange81756.5 carcano looks similar
A true, mug *shot*
I’m 99% sure this video was one of the first ones that got everyone into RUclips shorts
Awesome! But would look better with a browner coffee.
Exactly what I was thinking, I know some people drink black coffee, but brown is more synonymous with coffee.
@@JRodizAwesomeyeah gotta be honest, even black coffee is just really dark brown so i agree
Ferrofluid
Bro that’s a good mug shot
im gonna touch you😍
That looks sick someone actually should make that a cup
Holy shit that’s amazing!!!
This is pretty crazy! I love this, very awesome job!
Craziest mugshot I’ve ever seen
It's amazing !!! 👌
Thats so dope!
Bro actually took 13 hours just for a pun, respect
This guy took 3d printing to a whole other level🗿
That's art & history of it in the making ❤❤❤
Awesome project! Now this is something that could be an actual merch article for the "Wanted" movie, I mean it literally could have been in the ending scene (the bullet pierces an energy drink can and then flies right through a donut hole, so why not a coffee mug).
Shiii the way you connected em is smart af.
Thanks! If I would have printed it in one piece I don’t think it would have looked as good 👍
I would love having such a mug.
Bro really woke up one day and said " You know what? I'm gonna make a ☕️ 🔫 "
Id brush uv resin over the coffee to look like real liquid! I love blender this is awesome
Straight out of the game superhot
Taking the word mugshot into another level
If you could make it like that but with nothing inside the mug so you can drink out of it - have your morning coffee or whatever, I would buy that forsure.
For some reason I thought you shoved a whisk on the side of the mug 😂
Sameeee
Actually fire💯
Coffee being a lifesaver portrayed in art
Great modeling and print
Love the idea! What if you get rid of the wires and use coffee splashes to hold them shards in place?
Style that's awesome
That would be amazing if you could make that mug Functional !!!
You gotta put this in the market, create different mugs with different liquid colors like coffee, cream, orange juice and sell them, it would be so cool
EDIT: This post was incorrect, due to material and the contents of the object, it is acutate that it would spray out of the entrance of the bullet, heres a link disproving my original comment followed by the initial comment I made.
ruclips.net/video/jjUTZH_Vdxs/видео.htmlsi=K_UpRM33CSbuxeyH
My original comment:"As small tip, the spot the bullet enters should be indented instead of outwards as that's how objects tend to behave when they're shot."
This looks fucking amazing by the way
Also here's a second example
ruclips.net/video/dQw4w9WgXcQ/видео.htmlsi=Zp-g9MzKut-Cx27p
Yeah this is super cool but it does ever so slightly bother me anytime he turned it around to show the other side of it 😅
This should be the top comment
@@RewindMods yeah but to be fair we shouldn't expect everyone to have knowledge on ballistics, I don't want to discourage the art, it's very good. I just want to be helpful if I can.
@@djungleskog6516that not ballistics bro that's just common sense
Not a ballistics experts just an artist but i would've thought this was common sense. Had to check the comments to see if maybe I was wrong about the fact it shouldn't be going like that where the bullet entered
That's really cool 😎You earned yourself a new sub from Sweden 🇸🇪
This us what i think about when i hear mug shot
It's giving the "freak on a leash" music video ❤
I wish korn sold merch like this
So chaotic, I love it
I just hate how its shooting out on both sides
@@daq01lampa the shards
@@daq01lampa it looks wrong going out and not in i dont like it lile that