Thanks for this. I just added an a7IV to my arsenal! My FX3 and FX6 have Tilta cages, but I was debating on trying the original SmallRig cage for this...but then I saw this slightly more expensive Rhinoceros, and you showed me everything I needed to see. I'm getting this one instead!
There was already not too much space in between the camera's right hand grip and a lens but now with this cage there's even less space in there, my fingies don't fit there too well😖. Otherwise its not bad at all!
Its really good and solid cage but it has one big design flaw. It is advertised as it would directly fit Ronin RS arca plate. It does, but it fits wrong way - from right to left which means the motors will get on the way and you have to remove the Manfrotto->Arca plate from gimbal to attach the camera. On regular Ronin Arca plate you can slide it on the gimbal without shifting the balance.
Is it just the little spring loaded catch that's preventing the camera cage from sliding onto the plate left to right? I'm just looking at the original Arca plate that came with my RS2, and it has a little groove that allows it to slide past the little catch when approaching from the left side, as it's obviously designed to do. Looking at the underside of this cage (timestamp 4:50), I can see the groove is only on the left side of the camera cage. Could a solution be to file a small groove into the right side of the cage, next to the battery door? Or is there too much that would get in the way? I'm interested in getting this cage for my A7S III, but not if it means having to rebalance the gimbal every time I remove the camera.
Super Video. Danke dafür. So wie ich das verstanden habe, hast Du Dir den neuen Cage gekauft, um beim Fotografieren etwas an Gewicht zu einzusparen. Aber wenn Du lediglich 14 g einsparst, (ohne Top-Handle und Sidehandle, die Du ja beim fotografieren nicht brauchst) macht es doch gar nicht so viel Sinn, von dem bisherigen viel günstigeren Cage zu wechseln, oder?
I were finding a L-Plate for my a7r5 but I saw this video and loved the sleek design of this cage. It makes me considered a lot. Should I go for this cage (I mean the base version without the handle bars, I just rarely record some videos for fun only)? I know it makes the look of top camera becomes so bulky a little bit, but it's quite impressed me.
it's a solid cage I mostly use this one for protection and if I shoot mainly photos 1st and video second since it's a smaller cage and the hand grip of the camera is "more open" so to say
Was ich an dem Video vermisse ist die Art und Weise wie du den Käfig nutzt. Ich habe ein 7iv und finde den Käfig hübsch, kenne aber den Mehrwert dieser Sachen nicht. Ein wenig Inspiration würde mich sehr interessieren.
@@MichaelSchmidt_UrbnPxl haha yes, even w/o the cage, can't imagine how to flip with those things connected. This is the coolest/badass cage so far for A7IV (IMO), have you tried to use with Ronin RS3?
Glad to hear it works well with the RS3. One of the other commenters has pointed out that you cannot slide the camera onto the gimbal plate from left to right, which means you have to remove the plate from the gimbal in order to slide it on from right to left. This requires you to then rebalance the gimbal each and every time you remove and reattach the camera. Have you found this to be an issue? Do you think it would be possible to file a small groove into the right side of the cage base, near the battery door area, to make it possible to slide the camera on from left to right, as DJI have designed their plate to do?
very nice overview. I get mine tomorrow, I've been waiting of 4 months!
Thanks for this. I just added an a7IV to my arsenal! My FX3 and FX6 have Tilta cages, but I was debating on trying the original SmallRig cage for this...but then I saw this slightly more expensive Rhinoceros, and you showed me everything I needed to see. I'm getting this one instead!
There was already not too much space in between the camera's right hand grip and a lens but now with this cage there's even less space in there, my fingies don't fit there too well😖. Otherwise its not bad at all!
Still glad i got the half cage
Why though ?
Im thinking of getting the rhinoceros
Its really good and solid cage but it has one big design flaw. It is advertised as it would directly fit Ronin RS arca plate. It does, but it fits wrong way - from right to left which means the motors will get on the way and you have to remove the Manfrotto->Arca plate from gimbal to attach the camera.
On regular Ronin Arca plate you can slide it on the gimbal without shifting the balance.
Yeah one of the biggest reason why I bought it is specifically for this and I was super let down to find out it was mounted the other side :(
Is it just the little spring loaded catch that's preventing the camera cage from sliding onto the plate left to right? I'm just looking at the original Arca plate that came with my RS2, and it has a little groove that allows it to slide past the little catch when approaching from the left side, as it's obviously designed to do. Looking at the underside of this cage (timestamp 4:50), I can see the groove is only on the left side of the camera cage. Could a solution be to file a small groove into the right side of the cage, next to the battery door? Or is there too much that would get in the way? I'm interested in getting this cage for my A7S III, but not if it means having to rebalance the gimbal every time I remove the camera.
@@guywhitworth5764 it merges into battery surroundings. The arca and battery surrounding cage are same level
Good review, I noticed that your Rhinoceros Cage color is different from the one I find on Amazon, the one you are holding has a lighter gray color.
Looks so good, I just wish the handle wasn’t fake leather, that stuff always falls apart, and it’s in a constant wear area.
Super Video. Danke dafür. So wie ich das verstanden habe, hast Du Dir den neuen Cage gekauft, um beim Fotografieren etwas an Gewicht zu einzusparen. Aber wenn Du lediglich 14 g einsparst, (ohne Top-Handle und Sidehandle, die Du ja beim fotografieren nicht brauchst) macht es doch gar nicht so viel Sinn, von dem bisherigen viel günstigeren Cage zu wechseln, oder?
Good video. With this rhino cage, can you still mount a sony flash on the hot shoe? I want the cage to stay on for photos and videos.
Thanks… well you should … but might depend on the flash
@@MichaelSchmidt_UrbnPxl That's a non comittal answer.
@@MichaelSchmidt_UrbnPxl U could have tried it and give a proper ans.
@@dyong888 well... I don't have a flash, I don't use flash ... so can't really test 😅
Is there only one color? Looks very special. I think its perfect for Hybrid Shooters
well thers is only this color version avalible but if you look closer the cage itself has the gun metal / carbon color look
I orderd the same. But yours looks like brown leather, browninsh color
VIelen Dank! Ich überlege von Tilta auf diesen Cage zu wechseln, weil die Tasten oben rechts frei sind
I were finding a L-Plate for my a7r5 but I saw this video and loved the sleek design of this cage. It makes me considered a lot. Should I go for this cage (I mean the base version without the handle bars, I just rarely record some videos for fun only)? I know it makes the look of top camera becomes so bulky a little bit, but it's quite impressed me.
it's a solid cage I mostly use this one for protection and if I shoot mainly photos 1st and video second since it's a smaller cage and the hand grip of the camera is "more open" so to say
Was ich an dem Video vermisse ist die Art und Weise wie du den Käfig nutzt. Ich habe ein 7iv und finde den Käfig hübsch, kenne aber den Mehrwert dieser Sachen nicht. Ein wenig Inspiration würde mich sehr interessieren.
Quick question, I know this is built for horizontal shooting but since we live in a world of Reels, can this cage be adjusted for vertical shooting?
휼륭한 제품 설명입니다
대단히 감사합니다.❤❤
Is there a lot of difference between your camera body and the a7riii? Would it work on the a7riii?
sadly this will not fit the A7RIII
Moin, kann man das Display seitlich ausklappen oder ist der Griff im Weg?
Great review! Thanks
kann man das Display seitlich ausklappen oder ist der Griff im Weg?
Rhino seems like it leaves way more camera body exposed to drops
yeah kinda but I think the most essential parts are covered
ìf ít fit A7SIII will ít fit A7RIV ??
Does this cage allow you to shoot vertical content?
yes any cage will as long as there is a 1/4 screw on the side
Is the flip screen still able to rotate 360 with this cage on?
yes ... as long as you don't have any HDMI or audio cable connected ... but that is also an "issue" without any cage anyways 😅
@@MichaelSchmidt_UrbnPxl haha yes, even w/o the cage, can't imagine how to flip with those things connected.
This is the coolest/badass cage so far for A7IV (IMO), have you tried to use with Ronin RS3?
@@callsignnix yes indeed … and it works perfectly fine with the RS3 with the small rig arca Swiss plate I talked about in one of my other videos
@@MichaelSchmidt_UrbnPxl nice. Thank you for the information. Im gonna get one for me..
Glad to hear it works well with the RS3. One of the other commenters has pointed out that you cannot slide the camera onto the gimbal plate from left to right, which means you have to remove the plate from the gimbal in order to slide it on from right to left. This requires you to then rebalance the gimbal each and every time you remove and reattach the camera. Have you found this to be an issue? Do you think it would be possible to file a small groove into the right side of the cage base, near the battery door area, to make it possible to slide the camera on from left to right, as DJI have designed their plate to do?
available for a7iii?
I dont think so...might fit the A7IV tho'
is it ronin rs 2 compatible or ?
Yes
will it suit on SONY A1?
its made for A7R V, A7 IV, A7S III ... so will not be for A1 since the camera body is a bit different I think but I'm not 100% sure
@@MichaelSchmidt_UrbnPxl Not fit because A1 have’s another top dial.
Is he saying "economic" ?
ergonomic