Best tool I can use yet for me. This is great and how ingenious is this. I have some of the parts to make this some angle iron and a flat piece of steel. I saved this video so I'll watch it again and write down everything I need. This is a must have for me.
A little welding might have been faster, but I really like the clean look you got with using drill and tap. Being adjustable is pretty sweet also. Thanks for sharing
The table could have been done with a single section of angle iron: cut a too-wide length; mark, drill, tap as necessary; clamp a piece of scrap to those points at which the 90° bend will be needed and drill between the two to get the fold line; cut in from the ends, to the interior width of the supports, on (or just 'below') the angle; bend the two arms inward; install.
Larry Hutcherson Sr - You are right. Welding could have made the job much simpler. But if you don't have welding equipment, you have to necessarily follow the method shown to build the jig.
Excellent video and process. You are genius for putting together this simple but very useful grinder attachment. Some times I need a grinding wheel on the job site but it is not always practical for a shop size grinder. Your grinder attachment is perfect. Thank you so much for sharing.
I think without welding you can put the parts better in the exact place you want them. Ok, welding goes faster, but not everybody likes to weld / or have the equipment. All over: Great idea! Will take over and thanks for uploading.
GREECE-ATHENS..Good morning .... I have been watching you for a long time and my impressions are excellent towards your person, I honestly amazed you from the very beginning of my registration. your ideas and your patents.
I love your videos! Do you have a welding machine? I love how you make things without using one so those that don't have one can make whatever you are making.
Good idea but that design is good for flap disc only, grinding wheels are not for side grinding jobs, you have to use their tip to grind safely, longer side grinding will cause damage to their bonding and glued material, they may separate and causes real danger.
You normally grind with a small bevel at the edge of the grinding wheel. So the wheel normally gets thin only at the edge and wears from the edge inwards. The way you are using the grinding wheel could eventually create a safety issue when the wheel gets thinned in the center and still has a large radius and relatively larger amount of mass around the edge.
...давно искал что/либо похожее, чтоб без сварки собиралась, молодец, сделаю себе подобную, лайк и уважуха😉..!
Молодец, классный станочек из болгарки. Надо будет смастерить себе такой же.
I don't have a welder and I love the way you show me how to make something without one. Thank you.
Hola me cantó tu trabajo y tu vídeo saludos de ciduda de México 🇲🇽🇲🇽🇲🇽 gracias 👍👍👍👏👏👏
Best tool I can use yet for me. This is great and how ingenious is this. I have some of the parts to make this some angle iron and a flat piece of steel. I saved this video so I'll watch it again and write down everything I need. This is a must have for me.
Хорошая идея! Сегодня сделаю такую же.
А без приспособы болгаркой работать не умеете? :-)))
Well done. Nothing easier to come up with. A useful thing especially for a small workshop.
Очередная хорошая идея (good idea). И опять без сварки!
Я тоже не люблю, когда применяют сварку. Ну нет её у меня! :-)
Молодец, полезный агрегат вышел. Спасибо!
Now a days I am watching your videos and I can say you are a very Genius and hard worker , Thank you for this wonderful video
A little welding might have been faster, but I really like the clean look you got with using drill and tap. Being adjustable is pretty sweet also. Thanks for sharing
Como fazer chanfrado
Was thinking the same thing, pretty over engineered for its limited use.
The table could have been done with a single section of angle iron: cut a too-wide length; mark, drill, tap as necessary; clamp a piece of scrap to those points at which the 90° bend will be needed and drill between the two to get the fold line; cut in from the ends, to the interior width of the supports, on (or just 'below') the angle; bend the two arms inward; install.
Larry Hutcherson Sr - You are right. Welding could have made the job much simpler. But if you don't have welding equipment, you have to necessarily follow the method shown to build the jig.
@@Bright8888 - You can make a welder by rewinding a couple of microwave transformers. I made a spot welder with one also.
Fantastic Idea..great job. Best part no welding was done. You can take it apart and replace any warn parts. Thank you
Excellent video and process. You are genius for putting together this simple but very useful grinder attachment. Some times I need a grinding wheel on the job site but it is not always practical for a shop size grinder. Your grinder attachment is perfect.
Thank you so much for sharing.
Parabéns pela iniciativa dê passar sua ideia para nós
Real nice like. Real nice
Свёрла заточены на пятёрочку, как красиво стружка выходит)))
Es de las mejores ideas que he visto, me gustó mucho, gracias
Thank you
Who needs a welder? Beautiful clean design. ADAPT AND OVERCOME
Awesome nice creation, brilliant idea bro .
Мастер ЗОЛОТЫЕ РУКИ!!!
I think without welding you can put the parts better in the exact place you want them. Ok, welding goes faster, but not everybody likes to weld / or have the equipment. All over: Great idea! Will take over and thanks for uploading.
Genius, you always have the best and most practical ideas, thank you !!
That's because he steals other people's ideas.
Amazing he made all that without the need for the attachment he was making.....
Boa ideia. ..pouco material a ser usado e quando está usando tem boa segurança. ..parabéns
Muy buen adminículo, e interesante por el hecho de no necesitar de soldar.... Felicitaciones y like..!!!
I love your videos, you are my idol
Great idea and performance. Thanks from Brazil!
Bravo! You really pulled it off.
Excelente projeto! Já sei o que fazer com uma esmerilhadeira velha que eu tenho! ;
Very good, I'll make one for myself.
DIY, ideas by these generous professionals, help immensely those striving to learn
Bhai best idea sir je
Хорошо реализована идея и главное просто до не возможности.
GREECE-ATHENS..Good morning .... I have been watching you for a long time and my impressions are excellent towards your person, I honestly amazed you from the very beginning of my registration. your ideas and your patents.
Доступное изготовления, отличная идея молот!)
Thanks for shawing how and sharing that, I will do it no welding that's great
Like the simplicity of this one. Thank you
genial viejo he visto otras base para banco pero esta me gusto porq es mas simple sencilla y lleva menos materiales
It is awesome idea .and wonderful tool.
Eine großartige Idee und ein tolles Projekt 💎💎💎💎💎👍
I am not allowed to weld. Great idea. Thanks
Всё гениальное просто!😁
Excelente trabajo.
Muy buen complemento para la herramienta
Молодец класно и просто,благодарю
Grate idea
Buena idea amigo gracias por el video me haré una igual saludos desde colombia!!!
Jj
Thank you. Your tutorial video help me much.
Wonderful attachment without welding.
nice idea, and music
Muy bien ingenioso y versátil.
Saludos desde Perú mi friend...!!
OSAMA ALTAYEB FROM YEMEN. Thank you very much for all videos and DIY you. 😎🤗☝🖒
Cool 👍
Nice ypu make really best things
Nice job as always mate. Thanks for that.
Genial ! Sua ideia está de parabéns! -- Great! Your idea is to be congratulated!
روعه وابداع وتميز متجدد دائما
This is a good construction !!
Hi, Mistry. I understand: «if I don't have a welding machine, then I use bolts!» ;-) Congratulations, Mistry. Yours attachment works very well!
No everybody have a welder machine remember there are persons 3th World,
Ótima idéia parabéns pela criatividade 🔨🔧🔩
Excellent!!!
That's nice
Very useful 👍👍👍
Genius techniques ⭐⭐⭐⭐⭐
Genial
Muy buena idea
Good good congratulation
Great idea and great realization !!!! 👍🏻👍🏻👍🏻
Nice idea, thanks
Great job, great idea. I took it.
Original and smart.
Great idea!
Harbor freight sells a pneumatic filer! Works great for making slots and square holes!
Super!
Very nice angle grinder, I use a Makita one on My Channel
Great idea! You did not use a ruler! Impressive! Next, you can add the ability to angle the table.
very good
Super tare.
Very, very good.
Great idea..I wanna make it one at home and thank for share these video👃
I love your videos! Do you have a welding machine? I love how you make things without using one so those that don't have one can make whatever you are making.
I might make a diy welding machine on my channel
Lidl welders are cheap as chips..£75 for a basic machine, get a good helmet gloves etc, and off you go.
Good video
Ama shak👏👏👏👏👏👏👏👏
Excelent... Perfec...
Great idia mistri very izye small jhob work
Great job I must make one to use in my shop very hand.
Вещ. Неплохая. Нужная. Спасибо. Буду. Делать
Thanks for the vid, wud b nice and really helpul if U cud also mention specifications of matrials used. In description. Thanks again!
That grinding disc will wear thin, then explode in your face. Thanks for sharing.
KLASS!
Good idea but that design is good for flap disc only, grinding wheels are not for side grinding jobs, you have to use their tip to grind safely, longer side grinding will cause damage to their bonding and glued material, they may separate and causes real danger.
So good!
No 1
Zabardast
Magnifico...
Good job! I need this machine. I Will try to do make one set. Thanks.
πολη ευκολη καλη και εξυπνη κατασκευη ευγε
Fraternellement Idea 💪💪💪💪💪👏👏👏👍👍👍👍👍
Wow good job bro
Супер!!!
You normally grind with a small bevel at the edge of the grinding wheel. So the wheel normally gets thin only at the edge and wears from the edge inwards. The way you are using the grinding wheel could eventually create a safety issue when the wheel gets thinned in the center and still has a large radius and relatively larger amount of mass around the edge.
Хороший станок, спасибо что поделились видео, а какой фирмы ваш отрезной диск что то не видно названия