Yamaha YZF R1 RN09 - 2002-2003 Bi-xenon headlight upgrade retrofit retroquick kit by Aharon
HTML-код
- Опубликовано: 11 окт 2024
- Yamaha YZF R1 - Bi-Xenon projector headlight Upgrade Kit with custom mounting bracket.
retrofitlab.co...
Getting tired of the bad light output from the original headlight or (for some countries) that only one side is activated with low-beam?
We have the solution....the Aharon bi-xenon projector kit.
With this upgrade kit light output is improved, both sides are bi-xenon, so low and high beam on both sides and looks are improved.
This custom kit contains all the materials you need to upgrade your halogen headlights to amazing looking bi-xenon headlights. Interested? Take a look at our Yamaha R1 headlight upgrade kit here:
retrofitlab.co...
For more info and output shots:
www.retrofitla...
More information about opening the headlights:
www.retrofitla...
Don't forget to like and follow us on Facebook to keep updated on promotions, new products etc.
/ retrofitlab
Visit our Facebook group for a discount code, user examples etc.
/ europeanheadlightcommu...
Any questions? Contact us directly!
www.retrofitlab...
info@retrofitlab.com
+31 (0)341-820220
Retrofitlab.com
Tolweg 2W
3851SK Ermelo
Netherlands
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
Brutal...
Is this a 2.5 or 3 inch shroud? I'm looking to replace the shroud with a capable daylight running light embedded shroud.
We used a 2,5 inch bi-xenon projector and a 3 inch shroud.
Dear friend. Where I can buy this accessories for lens?
Here :-); www.retrofitlab.com/en/yamaha-r1-bi-xenon-mh1-2001-2003.html?
Isn't there something to put on a 2016 multistrada 1200 ducati?
Sorry, we do not have a kit for this motorcycle..
Hi, do you ship in the US?, thank you.
Yes we do :) Please see this page: www.retrofitlab.com/en/customer-service.html
Retrofitlab.com thanks for the reply bro, lastly, how long is the shipping time here to the US (california), thanks and more power!
@@ayinxx16, about 14 days.. :)
How are you heating the headlamp assembly before taking it apart?
In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time.
Method 2 is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.
Can't find it on your website .
Please see this link: retrofitlab.com/products/yamaha-yzf-r1-2001-2003-headlight-upgrade-kit
Do you have that also for the 2008 model?
No sorry, we don't have a kit for that model