Это видео недоступно.
Сожалеем об этом.

DIY Device Detects Objects With Sound

Поделиться
HTML-код
  • Опубликовано: 17 авг 2024
  • Find out how far away something is using SOUND?!?! Recently, I've been playing around a lot with the Raspberry Pi Pico, and I thought it'd be cool to create a full project from start to finish and show each step. The project? Well, the current pandemic begs for a Social Distance Bot that alerts you when someone is within 2 meters (6 feet). How does it alert you? In the most annoying way possible…a piezo buzzer. I've tried to document everything so you can make one of these yourself.
    Chapters:
    0:00 Introduction
    0:50 What You Need
    1:15 How Ultrasonic Sensors Work
    2:32 Wiring The Components
    3:29 Writing The Code
    5:25 Making A Circuit Board
    6:05 3D Printing A Case
    6:13 Testing it out
    _____________________________
    🤖💾🤖💾 PARTS LIST 💾🤖💾🤖
    _____________________________
    (Links May Be Affiliated)
    • Pi Pico - www.adafruit.c...
    • SSD1306 display - amzn.to/3btqnuf
    • Piezo buzzer - amzn.to/3rz9AeK
    • HC-SR04 Ultrasonic Sensor - amzn.to/3ciWCv9
    • Breadboard - amzn.to/3jy4xYV
    • Jumper Wires - amzn.to/3cXtnAk
    • Soldering Equipment - amzn.to/3rDUiVL
    • 90 Degree MicroUSB Adapter - amzn.to/3exeaGT
    _____________________________
    📲🔗🔗📲 IMPORTANT LINKS 📲🔗🔗📲
    _____________________________
    • 💻PROJECT PAGE💻 - www.tinkernut....
    • How An Ultrasonic Sensor Works - lastminuteengi...
    _____________________________
    💰💰💰💰 SUPPORT THE SHOW 💰💰💰💰
    _____________________________
    www.tinkernut....
    _____________________________
    📢📢📢📢 Follow 📢📢📢📢
    ____________________________
    redd.it/5o3tp8
    / tinkernut_ftw
    / tinkernut
    / tinkernut

Комментарии • 49

  • @Mikidy303
    @Mikidy303 3 года назад +28

    My social distancing tool is my personality. It's never failed.

  • @ZattyBoi
    @ZattyBoi 3 года назад +36

    You're my childhood bro, i love your videos!

  • @atharva741
    @atharva741 3 года назад +33

    i see tinkernut i click, simple.

  • @goodBEan
    @goodBEan 3 года назад +11

    For a social distancing device I went with a different approach. I just used a hockey stick (can be wood, platic or composite), some duct tape, and a steak knife (butcher knife works just fine). Its sometimes called a Canadian Felony.

  • @nerdg2
    @nerdg2 3 года назад +1

    A fan since 2009. love your videos back then and love them more now! Keep up the awesome work. Cheers!

  • @gauravmalltarlok5354
    @gauravmalltarlok5354 3 года назад +1

    Even though the old intro music was classic, I love how the style of these videos has evolved.

  • @rachitsharma1079
    @rachitsharma1079 3 года назад +3

    Can you please make a video on how to use a camera (Arducam 5MP Plus OV5642 Mini Module Camera Shield SPI Camera Module for Arduino UNO Mega2560 Board & Raspberry Pi Pico) with Raspberry Pi Pico

  • @MSDOSMemes
    @MSDOSMemes 3 года назад +3

    Haven't uploaded in a long while. I've been seeing this channel since 2012.

  • @MarkATrombley
    @MarkATrombley 3 года назад +1

    The speed of sound is not constant, it varies by temperature and air density. Not enough to make a difference in this project but enough to complicate fine measurement.

  • @DaRios_Tristan
    @DaRios_Tristan 3 года назад

    Hey men ! I was watching you since 2010 wow thank you !

  • @nico.m8346
    @nico.m8346 3 года назад +2

    Missed your videos!

  • @VonGoldfinger
    @VonGoldfinger 3 года назад

    My ugly face is my social distancing tool.

  • @englishandproud.
    @englishandproud. 2 года назад +1

    Where did you go . i hope you're OK

  • @richardamullens
    @richardamullens 3 года назад +1

    Too much padding then rushes over the Pico software installation - then the project page gives 404.

  • @norullzz
    @norullzz 3 года назад

    Those 90-degree angles in the pixie path will make some people look at you like you are scratching your nails over a chalkboard.

  • @MrWickerWeaver
    @MrWickerWeaver 3 года назад

    Your videos havent been showing up in my recommended feed. Not sure why but love your content

  • @sinecurve9999
    @sinecurve9999 3 года назад +2

    I wonder if we could use a similar setup to find the approach speed of objects by measuring the doppler shift the of incoming signal relative to the initial signal. Based on the datasheet of the HCSR04, my guess is that it's not due to it triggering off of pulses and not waveforms. Is the sample rate on these boards fast enough to measure a 40khz signal? What are your thoughts?

  • @s.aravindh6227
    @s.aravindh6227 3 года назад +1

    Nice video bro 😀😀

  • @jakes4302
    @jakes4302 3 года назад +2

    Great video! A good rule of thumb when designing a PCB is to never use 90 degree angles for traces.

  • @ProfessorTapia
    @ProfessorTapia 2 года назад

    Can you make a video on how to safely power the pico with batteries?

  • @TheOldBlackCrow
    @TheOldBlackCrow 3 года назад

    Question; if the distance sensor is also I2C, can the Pico handle that or is it one I2C channel at a time?

  • @abideenjunaid3036
    @abideenjunaid3036 3 года назад

    For dynamic ssh tunnelling, should i make the raspberrypi4 a web server or home server by installing apachi and my sql, and should i do normal networking connection for both system with my reuter modem b4 i begin to set up ssh socks prossy in the command prompt? Please i need a full giudiance because i have spent alot on this project,

  • @alphacomputersolutions2314
    @alphacomputersolutions2314 3 года назад

    welcome back

  • @mohamedwork9779
    @mohamedwork9779 3 года назад

    The old theme music is awesome

  • @dunste123
    @dunste123 3 года назад

    This is epic

  • @KarimBab
    @KarimBab 3 года назад

    Where are you man it's been 5 months

  • @mikus4242
    @mikus4242 3 года назад

    Can it warn of annoying administrators getting too close?

  • @burhanuddinhaider
    @burhanuddinhaider 2 года назад +2

    Where are you tinkernut

  • @sainathvedala2581
    @sainathvedala2581 3 года назад

    Tinkernut doesn't upload for 5 months
    ....... I'm concerned

  • @JoJoNumbarOne
    @JoJoNumbarOne 3 года назад +4

    Gadget thumb up
    Social distance thump down

  • @asjidkalam
    @asjidkalam 3 года назад

    man, wya?

  • @vincentvindevogel2368
    @vincentvindevogel2368 3 года назад

    Ah yes, everyone will love this.

  • @graham2461
    @graham2461 3 года назад

    I watched your vid on crypto bitcoin 2009.mental

  • @GamesStraight
    @GamesStraight 3 года назад

    dude dont you get old like the rest of us ?

  • @blex395
    @blex395 3 года назад +1

    If you scared go to church

  • @kodybuffettwilson
    @kodybuffettwilson 3 года назад +4

    The pandemic has been declared over, it is now acknowledged that the virus is endemic, aka not going anywhere.

    • @offgridhomesteaders863
      @offgridhomesteaders863 3 года назад +4

      and still a 99% survival rate and no flu this past year.. LOL oh man when people finally realize they have been duped this hard, and actually fell for this nonsense heads will certainly explode. Get the popcorn ready.

    • @mbsfaridi
      @mbsfaridi 3 года назад

      Have they isolated the "virus" yet?

    • @mbsfaridi
      @mbsfaridi 3 года назад

      @the4kman Yes there was and is. You just misspelled it (put a l in there),

  • @nomorecensorship2815
    @nomorecensorship2815 3 года назад +1

    18 minutes after upload and it's already only good for "future watchers".

  • @alsafejriszemi8185
    @alsafejriszemi8185 3 года назад +4

    I gave it a thumbs down. Not for the idea or the video. Only because the covid stuff.