Press and hold plus and minus for 2 seconds to change state Press the i button to change parameter state. Press and hold + and Light button to restore defaults. Press and hold i and - for trip reset P1 Metric or imperial (MPH KMPH) P2 Voltage (Changes not recommended) P3 Pedal assist modes (0-3, 1-3, 0-5, 1-5, 1-7, 0-7, 0-9, 1-9, Default is 0-5 (Also ratio settings here) P4 Wheel Diameter (Changes not recommended) P5 Speed magnet settings (changes to this do nothing) P6 Speed limit P7 Controller current limit (Changes not recommended) P8 Pedal assist sensor settings (Changes not recommended) P9 Throttle setting PA Password setting (Default is 1212) Pb Settings for auto sleep default is 10 minutes
Press and hold i and - for trip reset. That doesn't work! I tires it only shows zero on your end but when you turn on the ebke and turn back on it shows the total miles still.! How do I make it read zero?
For $79 Fucare will ship you a 28mph controller and display that allows 28mph throttle only! Free shipping too. Also the pedal lag is adjustable, on setting 4 switch the parameter from 9 to 2. 9 is the most pedal lag, 2 is the least
I messaged Fucare via their webpage chat- they quickly sent me a link to the display manual- it there, there's a chart for each of the PAS modes and settings and what percentage of motor usage is for each level on each setting!
I think by law to be a CLass 2 ebike, they cant go over 28mph when shipped from the manufacturer, but, if on private land, you want to go faster, you can UNLOCK the extra power/speed
@@sammydewitt4498 Im definately in the settings. My bike is set up for only 5 PAS levels. I just received this bike mid June 2024, so I believe the software is an updated menu from this original video.. I press the + & - buttons to get to the 01 thru 07 settings, all which have their own peremiters per those 01,02,03,04,05,06,07
I messaged Fucare via their webpage chat- they sent a link to the Manual document, which matches up with the software version my June 2024 Gemini is!!!!
Hello, 52v batteries cannot be used for the time being. This is just a reserved option when writing programs, but it does not mean that gemini or gemini x or libra can use 52v batteries.
A 2024 July by, and this does /not/ work anymore(it's not even an option in the menu). Buyer beware. You have to phantom pedal which is SUPER annoying! And it only goes up to 28mph while phantom pedaling, and only 20mph without. Not 32mph!
i have the gemini x and it certainly will do 32mph throttle only no pedaling, with me on it 300+lbs. i was cruising in traffic at 32mph throttle only in myrtle beach a few weeks ago (on video) you have to lift the P6 top speed limit, then set your P3 level 5 setting to 100% 32 mph at your finger tips. same video i used to set mine up, its not rocket science.
When I press the "!" and "-" it resets the miles to zero but when you turn off the ebike battery's and turn back on it still shows the total miles on the ebike. How do I reset it completely to zero?
@@ivan6414 Hello friend Sorry, total mileage cannot be reset. You can only reset the distance of a single trip. If you still have questions, you can contact our after-sales customer service.
@FucareBike Hello guys, I was wondering jf you guys could help me out. I had my ebike stolen from me in Toronto Ontario. A guy came up to me with a weapon and took my ebike. So I had to give it up. Is there a way you guys could help me with a new ebike or track it down somehow? Happened August 31st and I have the police case number
Come on man! At least they got all the spelling correct. Pause it and read each screen. P9 switch to hf-y is the important one if you want full throttle independent of the PAS setting. Setting P8 is for the cadence sensor pedalling delay. Turn it down to 2 or 3. Setting P6 is max speed, switch it to 45. Thank me later
I messaged Fucare via their webpage chat- they sent a link to the Manual document, which matches up with the software version my June 2024 Gemini is!!!! You can message them via their page, or send me a message and I can email or send a link to it for you.
Press and hold plus and minus for 2 seconds to change state
Press the i button to change parameter state.
Press and hold + and Light button to restore defaults.
Press and hold i and - for trip reset
P1 Metric or imperial (MPH KMPH)
P2 Voltage (Changes not recommended)
P3 Pedal assist modes (0-3, 1-3, 0-5, 1-5, 1-7, 0-7, 0-9, 1-9, Default is 0-5 (Also ratio settings here)
P4 Wheel Diameter (Changes not recommended)
P5 Speed magnet settings (changes to this do nothing)
P6 Speed limit
P7 Controller current limit (Changes not recommended)
P8 Pedal assist sensor settings (Changes not recommended)
P9 Throttle setting
PA Password setting (Default is 1212)
Pb Settings for auto sleep default is 10 minutes
Press and hold i and - for trip reset. That doesn't work! I tires it only shows zero on your end but when you turn on the ebke and turn back on it shows the total miles still.! How do I make it read zero?
But what do they do???
which support setting is best p3
What does all this mean though it would be nice if we got an explanation for what each of these options do
No kidding. I have yet to adjust anything and don’t like the way it is. I afraid I’ll mess it up.
For $79 Fucare will ship you a 28mph controller and display that allows 28mph throttle only! Free shipping too. Also the pedal lag is adjustable, on setting 4 switch the parameter from 9 to 2. 9 is the most pedal lag, 2 is the least
This is a helpful video! Thank you very much!
That's funny.
Where can I find an explanation for the P3 PAS modes? What each setting will do?
I messaged Fucare via their webpage chat- they quickly sent me a link to the display manual- it there, there's a chart for each of the PAS modes and settings and what percentage of motor usage is for each level on each setting!
The P5 setting: "The adjustable speed sensor magnet number range is: 1 ~ 15 psc". What does it mean?
P8 has the "run" sub-setting: run-F - Front direction, run-B - The opposite direction (Back, I guess). What is their meaning?
The video sets the max PAS level to 100% (1:30) while the factory setting is 94%. Is there any reason why it's 94% by default?
I think by law to be a CLass 2 ebike, they cant go over 28mph when shipped from the manufacturer, but, if on private land, you want to go faster, you can UNLOCK the extra power/speed
Could you do an updated video based on the software update? I don't have P1 - P10, just 01 thru 07
maybe youre not actually in the "settings" 1-7 is one of the available pedal assist ranges.
you have to hold + and - till you get to the "P" settings.
@@sammydewitt4498 Im definately in the settings. My bike is set up for only 5 PAS levels. I just received this bike mid June 2024, so I believe the software is an updated menu from this original video..
I press the + & - buttons to get to the 01 thru 07 settings, all which have their own peremiters per those 01,02,03,04,05,06,07
I messaged Fucare via their webpage chat- they sent a link to the Manual document, which matches up with the software version my June 2024 Gemini is!!!!
@@bryguybtb sorry,my bad.
i wonder why they changed it?
my gemini x was bought at the end of april.
0:48 so does that mean a 52v battery can be used on this ebike instead of 48v ? Im confused as to what that means
Hello, 52v batteries cannot be used for the time being. This is just a reserved option when writing programs, but it does not mean that gemini or gemini x or libra can use 52v batteries.
A 2024 July by, and this does /not/ work anymore(it's not even an option in the menu). Buyer beware. You have to phantom pedal which is SUPER annoying! And it only goes up to 28mph while phantom pedaling, and only 20mph without. Not 32mph!
i have the gemini x and it certainly will do 32mph throttle only no pedaling, with me on it 300+lbs.
i was cruising in traffic at 32mph throttle only in myrtle beach a few weeks ago (on video)
you have to lift the P6 top speed limit,
then set your P3 level 5 setting to 100%
32 mph at your finger tips.
same video i used to set mine up,
its not rocket science.
When I press the "!" and "-" it resets the miles to zero but when you turn off the ebike battery's and turn back on it still shows the total miles on the ebike. How do I reset it completely to zero?
Hello friend
We will send you a tutorial video for resetting mileage, please contact our email: partner@fucarebike.com
What you sent me doesn't reset the entire mileage of the ebike !!!!
@@ivan6414 Hello friend
Sorry, total mileage cannot be reset. You can only reset the distance of a single trip. If you still have questions, you can contact our after-sales customer service.
Why can't I reset the total mileage?
@FucareBike Hello guys, I was wondering jf you guys could help me out. I had my ebike stolen from me in Toronto Ontario. A guy came up to me with a weapon and took my ebike. So I had to give it up. Is there a way you guys could help me with a new ebike or track it down somehow? Happened August 31st and I have the police case number
00
This should all be in the user's manual. Trying to use this video is a pain. What is wrong with you?
Come on man! At least they got all the spelling correct. Pause it and read each screen. P9 switch to hf-y is the important one if you want full throttle independent of the PAS setting. Setting P8 is for the cadence sensor pedalling delay. Turn it down to 2 or 3. Setting P6 is max speed, switch it to 45. Thank me later
I messaged Fucare via their webpage chat- they sent a link to the Manual document, which matches up with the software version my June 2024 Gemini is!!!! You can message them via their page, or send me a message and I can email or send a link to it for you.